Nematron AEMQ77-989 Manuel utilisateur

AEMQ77-989

Intel®Q77 Express Chipset

ATX Motherboard

User's Manual

V 2.1

Release date: 2014.03

Preface

Contents

Trademarks .................................................................................. 3

Revision History.......................................................................... 3

Safety Instructions ...................................................................... 3

CE Conformity ............................................................................. 5

FCC-B Radio Frequency Interference Statement..................... 5

WEEE Statement ......................................................................... 6

Chapter 1 Overview................................................................. 7

Mainboard Specifications ......................................................................7

Mainboard Layout..................................................................................9

Chapter 2 Hardware Setup.................................................... 10

Components Reference Guide ............................................................10

CPU (Central Processing Unit) ............................................................ 11

CPU & Cooler Installation .................................................................... 11

Memory .................................................................................................. 14

Dual-Channel mode Population Rule...........................................................14

Installing Memory Modules............................................................................14

Power Supply ........................................................................................15

24-Pin Power Connector: JPWR1..................................................................15

4-Pin Power Connector: JPWR2....................................................................15

Back Panel I/O.......................................................................................16

Connector..............................................................................................18

Chassis Intrusion Pinheader: CI1..................................................................18

Serial ATA Connector: SATA1 ~ SATA5.........................................................18

TPM Module Connector: JTPM1....................................................................19

Fan Power Connector: CPUFAN1, SYSFAN1, SYSFAN2, SYSFAN3..........19

GPIO Pin-header: JGPIO1 ..............................................................................20

Front Panel Pin-header: JFP1........................................................................20

Front USB Pin-header: JUSB1 ~ JUSB3.......................................................21

Serial Port Connector: COM2 ~ COM6..........................................................21

Front Audio Pin-header: JAUD1 ....................................................................23

Parallel Port Header: JLPT1...........................................................................23

Jumper...................................................................................................24

Clear CMOS Jumper: CLR_CMOS1...............................................................24

ME Jumper: ME_DIS1 .....................................................................................24

AT / ATX Select Jumper: JAT1 .......................................................................25

Back Panel COM Port Power Jumper: JCOMP1 ..........................................25

Preface

On-board COM Port Power Jumper: JCOMP2 ~ JCOMP6..........................25

Slot.........................................................................................................25

PCI-E (Peripheral Component Interconnect Express) Slot .......................25

PCI (Peripheral Component Interconnect) Slot ...........................................26

Mini PCI-E Slot.................................................................................................26

mSATA Slot ......................................................................................................26

Chapter 3 BIOS Setup ........................................................... 28

Entering Setup ......................................................................................28

Control KEYS...................................................................................................28

Getting Help .....................................................................................................29

General Help <F1>...........................................................................................29

The Menu Bar ........................................................................................30

Main .......................................................................................................31

Advanced............................................................................................... 32

Boot .......................................................................................................38

Security..................................................................................................39

Chipset...................................................................................................43

Power.....................................................................................................44

Exit .........................................................................................................46

Preface

The material in this document is our intellectual property. We take every care

in the preparation of this document, but no guarantee is given as to the

correctness of its contents. Our products are under continual improvement

and we reserve the right to make changes without notice.

Trademarks

All trademarks are the properties of their respective owners.

NVIDIA®is registered trademark of NVIDIA Corporation.

ATI®is registered trademark of ATI Technologies, Inc.

AMD®is registered trademarks of AMD Corporation.

Intel®is registered trademarks of Intel Corporation.

Windows®is registered trademarks of Microsoft Corporation.

AMI®is registered trademark of Advanced Micro Devices, Inc.

Award®is a registered trademark of Phoenix Technologies Ltd.

Realtek®is registered trademark of Realtek Semiconductor Corporation.

Revision History

Revision

Revision History

Date

V2.1

For PCB v2.x

2014/03

Safety Instructions

Always read the safety instructions carefully.

Keep this User’s Manual for future reference.

Keep this equipment away from humidity.

Lay this equipment on a reliable flat surface before setting it up.

Preface

The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

Place the power cord such a way that people can not step on it. Do not

place anything over the power cord.

Always Unplug the Power Cord before inserting any add-on card or

module.

All cautions and warnings on the equipment should be noted.

Never pour any liquid into the opening that could damage or cause

electrical shock.

If any of the following situations arises, get the equipment checked by

service personnel:

The power cord or plug is damaged.

Liquid has penetrated into the equipment.

The equipment has been exposed to moisture.

The equipment does not work well or you can not get it work

according to User’s Manual.

The equipment has dropped and damaged.

The equipment has obvious sign of breakage.

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

UNCONDITIONED, STORAGE TEMPERATURE ABOVE 80℃(176℉),

IT MAY DAMAGE THE EQUIPMENT.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace

only with the same or equivalent type recommended by the manufacturer.

警告使用者:

这是甲类信息产品，在居住的环境中使用时，可能会造成无线电干扰，在这种

情况下，使用者会被要求采取某些适当的对策。

废电池请回收

For better environmental protection, waste batteries should be

collected separately for recycling or special disposal.

Preface

CE Conformity

Hereby, we declare that this device is in compliance with the

essential safety requirements and other relevant provisions set

out in the European Directive.

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the measures listed below:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/television technician for help.

NOTICE 1

The changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

NOTICE 2

Shielded interface cables and AC power cord, if any, must be used in order to

comply with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

Preface

1. this device may not cause harmful interference, and

2. this device must accept any interference received, including interference

that may cause undesired operation.

WEEE Statement

Under the European Union (“EU”) Directive on Waste Electrical

and Electronic Equipment, Directive 2002/96/EC, which takes

effect on August 13, 2005, products of “electrical and electronic

equipment” cannot be discarded as municipal waste anymore and

manufacturers of covered electronic equipment will be obligated to

take back such products at the end of their useful life.

Chapter 1 Overview

Thank you for choosing AEMQ77-989, an excellent industrial computer board.

Based on the innovative Intel®Panther Point chipset for optimal system

efficiency, AEMQ77-989 supports Ivy Bridge and Sandy Bridge processor

series in socket LGA1155 and supports up to four DDR3 1066/1333/1600

UDIMM slots to provide the maximum of 32GB memory capacity.

In the advanced-level and mid-range market segment, AEMQ77-989 provides

a high- performance solution for today’s front-end and general purpose

workstation, as well as in the future.

Mainboard Specifications

CPU

(Optional)

Intel Ivy Bridge series and Sandy Bridge series

processor in socket LGA1155

Chipset

Intel Q77 PCH

Support iAMT 8.0

Memory

4 DDR3 1066/1333/1600 UDIMM slots

Supports the maximum of 32GB

LAN

Gigabit Fast Ethernet by Intel 82579LM PHY & 82583V

GbE controllers

SATA

3 SATA 3Gb/s ports by Intel Cougar Point

2 SATA 6Gb/s ports by Intel Cougar Point

RAID

SATA1~5 support Intel Rapid Storage Technology

(AHCI/ RAID 0/ 1/ 5/ 10) by Intel Panther Point

Audio

HDA Codec by Realtek®ALC887

Compliant with Azalia 1.0 specs

Graphics

Support by the installed processor

- Support 3 independent displays by Ivy Bridge

series

- Support 2 independent displays by Sandy Bridge

series

Back Panel

I/O

1 PS/2 mouse/ keyboard port

1 VGA port

1 DVI-D port

Chapter 1 Overview

1 Serial port

1 Displayport

2 Gigabit LAN jacks

2 USB 2.0 ports

4 USB 3.0 ports

1 Line-In audio jack

1 Line-Out audio jack

1 Mic-In audio jack

Onboard

Connectors/

Pinheaders

3 USB 2.0 pin-headers

5 Serial port connectors

1 GPIO pin-header

1 Front Audio pin-header

1 Chassis Intrusion pin-header

1 Parallel Port pin-header

1 TPM Module connector (optional)

1 Front Panel pin-header

Slot

1 PCIe x16 slot

1 PCIe x4 slot

1 Mini-PCIe slot

1 mSATA slot

5 PCI slots

1 ISA slot (optional)

Form Factor

ATX: 305mm x 244mm

Environ-

mental

Operating Temperature: 0℃to 60℃

Storage Temperature: -20℃to 80℃

Humidity: 5% ～95% RH, Non-Condensing

Chapter 1 Overview

Mainboard Layout

Table des matières

Autres manuels Nematron Carte mère

Nematron

Nematron AEMNM10-876 Manuel utilisateur

Nematron

Nematron AEMQ87-953 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur