nekos
products have been manufactured in accordance with safety standards and
conforms to the stipulations of current standards in force.
When correctly assembled, installed and used according to the present instructions, they
will not generate any danger
for persons, animals or items.
Symbols used in the manual
DANGER
Contents
1. Security rules
................................
2.
Formulas and recommendations for installation
2.1.
Calculation of opening / closure force
2.2.
Maximum opening based on sash height
3.
Technical operating information
4.
Construction and regulatory references
5. Technical data
................................
6. Id plate and marking data
................................
7. Electric power supply
................................
7.1. Selecting the cross
8. Electrical connection
................................
9. Instructions for assembly
................................
9.1.
Preparation for mounting the actuator
9.2.
9.3.
windows
................................
10. Programming the actuator
10.1. Opening stroke-
10.2. Closure stroke-end
................................
10.3. Operation with BK-
11.
Actuator kit with electromechanical lock
11.1.
Electrical connection and operating logic
11.2.
Sound diagnostics in case of anomaly
12.
Checking for correct assembly
13.
Emergency manoeuvres, maintenance or cleaning
14. Troubleshooting
................................
15. Environmental protection
................................
16. Certificate of guarantee
................................
17.
Declaration of incorporation (for a partly completed machine) and EC Declaration of
Conformity
................................
3
INSTRU
products have been manufactured in accordance with safety standards and
conforms to the stipulations of current standards in force.
When correctly assembled, installed and used according to the present instructions, they
for persons, animals or items.
Symbols used in the manual
This indication draw the attention about potential dangers for safety and
health of peoples and animals.
................................
................................
................................
Formulas and recommendations for installation
................................
Calculation of opening / closure force
................................
................................
Maximum opening based on sash height
................................
Technical operating information
................................
................................
Construction and regulatory references
................................
................................
................................
................................
................................
................................
................................
................................
................................
................................
section of the power supply cables
................................
................................
................................
................................
................................
................................
Preparation for mounting the actuator
................................
................................
................................
................................
-hung windows
opening outwards or bottom
................................
................................
................................
................................
................................
................................
................................
................................
................................
electromechanical lock
................................
Actuator kit with electromechanical lock
................................
................................
Electrical connection and operating logic
................................
Sound diagnostics in case of anomaly
................................
Checking for correct assembly
................................
................................
Emergency manoeuvres, maintenance or cleaning
................................
................................
................................
................................
................................
................................
................................
................................
Declaration of incorporation (for a partly completed machine) and EC Declaration of
................................
................................
................................
products have been manufactured in accordance with safety standards and
When correctly assembled, installed and used according to the present instructions, they
This indication draw the attention about potential dangers for safety and
................................
................ 4
................................
............................ 5
................................
.. 5
................................
............................. 5
................................
..................... 6
................................
......... 6
................................
............... 7
................................
.............................. 7
................................
.... 8
................................
........ 8
................................
..... 8
................................
............................... 9
................................
10
................................
.......................... 10
opening outwards or bottom
-hung
................................
.................. 10
................................
........................... 11
................................
........................... 11
................................
............................ 11
................................
.............. 12
................................
....... 12
................................
........................... 12
................................
............................... 13
................................
.................... 13
................................
...................... 13
................................
.......... 14
................................
............................. 14
................................
............................... 14
Declaration of incorporation (for a partly completed machine) and EC Declaration of
................................
.................. 15
1. Security rules
C
SAFETY
.
The Nekos electrical actuators comply with the Machinery Directive (2006/42/EC),
Standard IEC 60335-2-
103 (Particular requirements for drives for gates, doors and
windows) and other directives and regulations indicated in the attached Declarations of
Incor
poration and CE Conformity (at the end of the manual). According to the Machinery
Directive, actuators are “partly completed machinery” intended for incorporation into doors
and windows. The manufacturer/supplier of the window is required, with exclusive
r
esponsibility, to ensure the compliance of the entire system with the applicable standards
and to issue CE certification. We strongly discourage any use of the actuators other than
that specified and therefore, in any case, the supplier of the complete sys
liability.
For systems installed at a height of less than 2.5 m above floor level or other levels
accessible to users, the manufacturer/supplier of the window must conduct
regarding potential harm (violent blows, crushing, w
use or possible malfunction or accidental breakage of the automated windows, and to
implement suitable
recommended by the specified standard:
- controlling th
e actuators via a “deadman’s button” placed near the system and within
the operator’s field of view, to ensure that people are out of the way during operation.
The button must be placed at a height of 1.5 m and operated by key if accessible to
the public; or:
-
use of contact safety systems (also included in the actuators) that ensure a maximum
closing force of 400/150/25 N, measured in accordance with paragraph BB.20.107.2
of IEC 60335-2-103; or:
- use of non-
contact safety systems (lasers, light grids); or:
-
use of fixed safety barriers that prevent access to moving parts.
Automated windows are deemed adequately protected if they:
-
are installed at a height of >2.5 m; or:
- have a leading-
edge opening of <200 mm and a closing speed of <15 mm/s; or:
- are pa
rt of a smoke and heat evacuation system for emergency use only.
In any case, moving parts of windows that could fall below 2.5 m following breakage of a
system component need to be fixed or
falling or collapsing
: e.g. the use of safety arms on bottom
The device is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lacking experience and knowledge. Do
not allow children to play
out of their reach.
The actuator is destined exclusively for installation indoors. For any special
application we recommend you consult the manufacturer beforehand.
After removing packaging, check f
4
THE FOLLOWING INSTAL
TY
.
I
MPROPER INSTALLATION
SIS AND PROTECTION MEASURES
.
The Nekos electrical actuators comply with the Machinery Directive (2006/42/EC),
103 (Particular requirements for drives for gates, doors and
windows) and other directives and regulations indicated in the attached Declarations of
poration and CE Conformity (at the end of the manual). According to the Machinery
Directive, actuators are “partly completed machinery” intended for incorporation into doors
and windows. The manufacturer/supplier of the window is required, with exclusive
esponsibility, to ensure the compliance of the entire system with the applicable standards
and to issue CE certification. We strongly discourage any use of the actuators other than
that specified and therefore, in any case, the supplier of the complete sys
For systems installed at a height of less than 2.5 m above floor level or other levels
accessible to users, the manufacturer/supplier of the window must conduct
regarding potential harm (violent blows, crushing, w
ounds) caused to people by normal
use or possible malfunction or accidental breakage of the automated windows, and to
in view of these. Such measures include those
recommended by the specified standard:
e actuators via a “deadman’s button” placed near the system and within
the operator’s field of view, to ensure that people are out of the way during operation.
The button must be placed at a height of 1.5 m and operated by key if accessible to
use of contact safety systems (also included in the actuators) that ensure a maximum
closing force of 400/150/25 N, measured in accordance with paragraph BB.20.107.2
contact safety systems (lasers, light grids); or:
use of fixed safety barriers that prevent access to moving parts.
Automated windows are deemed adequately protected if they:
are installed at a height of >2.5 m; or:
edge opening of <200 mm and a closing speed of <15 mm/s; or:
rt of a smoke and heat evacuation system for emergency use only.
In any case, moving parts of windows that could fall below 2.5 m following breakage of a
system component need to be fixed or
secured in order to prevent them from suddenly
: e.g. the use of safety arms on bottom
-
The device is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lacking experience and knowledge. Do
not allow children to play
with the fixed controls and keep any remote
The actuator is destined exclusively for installation indoors. For any special
application we recommend you consult the manufacturer beforehand.
After removing packaging, check f
or any damage on the appliance.
TO
ER
The Nekos electrical actuators comply with the Machinery Directive (2006/42/EC),
103 (Particular requirements for drives for gates, doors and
windows) and other directives and regulations indicated in the attached Declarations of
poration and CE Conformity (at the end of the manual). According to the Machinery
Directive, actuators are “partly completed machinery” intended for incorporation into doors
and windows. The manufacturer/supplier of the window is required, with exclusive
esponsibility, to ensure the compliance of the entire system with the applicable standards
and to issue CE certification. We strongly discourage any use of the actuators other than
that specified and therefore, in any case, the supplier of the complete sys
tem retains full
For systems installed at a height of less than 2.5 m above floor level or other levels
accessible to users, the manufacturer/supplier of the window must conduct
risk analysis
ounds) caused to people by normal
use or possible malfunction or accidental breakage of the automated windows, and to
in view of these. Such measures include those
e actuators via a “deadman’s button” placed near the system and within
the operator’s field of view, to ensure that people are out of the way during operation.
The button must be placed at a height of 1.5 m and operated by key if accessible to
use of contact safety systems (also included in the actuators) that ensure a maximum
closing force of 400/150/25 N, measured in accordance with paragraph BB.20.107.2
use of fixed safety barriers that prevent access to moving parts.
edge opening of <200 mm and a closing speed of <15 mm/s; or:
rt of a smoke and heat evacuation system for emergency use only.
In any case, moving parts of windows that could fall below 2.5 m following breakage of a
secured in order to prevent them from suddenly
The device is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lacking experience and knowledge. Do
with the fixed controls and keep any remote
-control units
The actuator is destined exclusively for installation indoors. For any special
application we recommend you consult the manufacturer beforehand.
or any damage on the appliance.
