nekos
products have been manufactured in accordance with safety standards and conforms to
the stipulations of current standards in force.
When correctly assembled, installed and used according to the present instructions, they will not
generate any danger for persons, animals or items.
Symbols used in the manual
DANGER
Contents
1.
SECURITY RULES
................................
2.
FORMULAS AND REC
OMMENDATIONS FOR INSTALLATION
2.1
Calculat
ion of opening / closure force
2.2
Maximum openi
ng according to height of sash
3.
USE OF
ACTUATOR IN ‘SYNCRO³’ VERSION
3.1
Recognition
................................
3.2
Use of a Syncro³-versio
4.
GENERAL
INFORMATION ABOUT THE ACTUATOR
5.
TECHNICAL DATA
................................
6.
CONSTRUCTION AND REGULATORY REFERENCES
7.
ID PLATE AND MARKING DATA
8.
ACTUATOR DIMENSIONS
................................
9.
9.1
Se
lection of power cable section
10.
INSTR
10.1
Warning
................................
10.2
Prepar
ation of actuator for assembly
10.3
Calculation of the numb
er of push / retention points
10.4
Screw holes for sup
port brackets and sash hinges
10.5
Assembly with opening outwards
10.6
Assembly with opening inwards
11.
11.1
11.2
C
onnections of INKA356 Syncro³
12.
12.1
INKA 356 Programming
................................
12.2
RESET Procedure -
configurations
12.3
Overlap acquisition
................................
12.4
LED Light signals
................................
13.
CHECKING FOR CORRECT ASSEMBLY
14.
EMERGENCY MANOEU
VRES, MAINTENANCE OR CLEANING
15.
ENVIRONMENT
16.
CERTIFICATE
17.
RWA CERTIFICATE
................................
18.
DECLARATION OF INCORPORATION (FOR A PARTLY COMPLETED MACHINE) AND
EC DECLARATION OF CONFORMITY
3
INSTRU
products have been manufactured in accordance with safety standards and conforms to
the stipulations of current standards in force.
When correctly assembled, installed and used according to the present instructions, they will not
generate any danger for persons, animals or items.
Symbols used in the manual
This indication draw the attention about potential dangers for
safety and health of peoples and animals.
................................
................................
................................
OMMENDATIONS FOR INSTALLATION
................................
ion of opening / closure force
................................
................................
ng according to height of sash
................................
ACTUATOR IN ‘SYNCRO³’ VERSION
................................
................................
................................
................................
................................
................................
................................
INFORMATION ABOUT THE ACTUATOR
................................
................................
................................
................................
CONSTRUCTION AND REGULATORY REFERENCES
................................
ID PLATE AND MARKING DATA
................................
................................
................................
................................
................................
................................
................................
lection of power cable section
................................
................................
................................
................................
................................
................................
................................
ation of actuator for assembly
................................
................................
er of push / retention points
................................
port brackets and sash hinges
................................
Assembly with opening outwards
– top hung,
lower part opening towards the
Assembly with opening inwards
– bottom hung, higher part
................................
................................
................................................................
................................
onnections of INKA356 Syncro³
................................
................................
................................
................................
................................
................................
................................
-
actuator configuration, Syncro³ configuration or
-LOCK electro-lock ................................
................................
................................
................................
................................
................................
................................
................................
CHECKING FOR CORRECT ASSEMBLY
................................
................................
VRES, MAINTENANCE OR CLEANING
................................
................................
................................
................................
................................
................................
................................
................................
DECLARATION OF INCORPORATION (FOR A PARTLY COMPLETED MACHINE) AND
EC DECLARATION OF CONFORMITY
................................
................................
products have been manufactured in accordance with safety standards and conforms to
When correctly assembled, installed and used according to the present instructions, they will not
This indication draw the attention about potential dangers for
safety and health of peoples and animals.
................................
....................... 4
................................
................ 5
................................
................... 5
................................
..................................... 6
................................
............ 6
................................
.......................... 6
................................
....................... 6
................................
................................. 7
................................
....................... 7
................................
.............................. 8
................................
.................................. 8
................................
........... 8
................................
.................................. 9
................................
....................... 10
................................
............................. 10
................................
.............................. 10
................................
.................. 11
................................
........................... 11
................................
............................. 11
lower part opening towards the
exterior ...... 12
interior .. 13
................................
................................... 14
................................
.... 15
................................
....................... 15
................................
............................ 16
................................
...... 16
actuator configuration, Syncro³ configuration or
................................
...... 17
................................
............. 18
................................
............... 18
................................
.................. 20
................................
............. 20
................................
............................. 20
................................
................................ 20
................................
................... 22
DECLARATION OF INCORPORATION (FOR A PARTLY COMPLETED MACHINE) AND
................................
...................... 23
1. SECURITY RULES
C
PERSONAL SAFETY
.
I
The Nekos electrical actuators comply with the Machinery Directive (2006/42/EC), Standard
IEC 60335-2-
103 (Particular requirements for drives for gates, doors and windows) and
other directives and regulations indicated in the attached Declarations of Incor
CE Conformity (at the end of the manual). According to the Machinery Directive, actuators
are “partly completed machinery” intended for incorporation into doors and windows. The
manufacturer/supplier of the window is required, with exclusive r
compliance of the entire system with the applicable standards and to issue CE certification.
We strongly discourage any use of the actuators other than that specified and therefore, in
any case, the supplier of the complete sys
For systems installed at a height of less than 2.5 m above floor level or other levels
accessible to users, the manufacturer/supplier of the window must conduct
regarding potential harm (violent blows, crushing, wounds) caused to people by normal use
or possible malfunction or accidental breakage of the automated windows, and to
implement suitable
r
ecommended by the specified standard:
-
controlling the actuators via a “deadman’s button” placed near the system and within
the operator’s field of view, to ensure that people are out of the way during operation.
The button must
be placed at a height of 1.5
public; or:
-
use of contact safety systems (also included in the actuators) that ensure a maximum
closing force of 400/150/25 N, measured in accordance with paragraph BB.20.107.2 of
IEC 60335-2-103; or:
- use of non-
contact safety systems (lasers, light grids); or:
-
use of fixed safety barriers that prevent access to moving parts.
Automated windows are deemed adequately protected if they:
-
are installed at a height of >2.5 m; or:
- have a leading-
-
are part of a smoke and heat evacuation system for emergency use only.
In any case, moving parts of windows that could fall below 2.5 m following breakage of a
system component need to be fixed or
falling or collapsing
: e.g. the use of safety arms on bottom
The device is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lacking experience
not allow children to play with the fixed controls and keep any remote
out of their reach.
The actuator is destined exclusively for installation indoors. For any special
application we recommend you consult the manufacturer
After removing packaging, check for any damage on the appliance.
Always request exclusive use of original spare parts. Failure to respect this
condition could compromise safety and invalidate the benefits contained in the
warranty for the appl
In the event of any problems or queries, consult your agent or contact the
manufacturer directly.
4
THE FOLLOWING INSTAL
SIS AND PROTECTION MEASURES
.
The Nekos electrical actuators comply with the Machinery Directive (2006/42/EC), Standard
103 (Particular requirements for drives for gates, doors and windows) and
other directives and regulations indicated in the attached Declarations of Incor
CE Conformity (at the end of the manual). According to the Machinery Directive, actuators
are “partly completed machinery” intended for incorporation into doors and windows. The
manufacturer/supplier of the window is required, with exclusive r
esponsibility, to ensure the
compliance of the entire system with the applicable standards and to issue CE certification.
We strongly discourage any use of the actuators other than that specified and therefore, in
any case, the supplier of the complete sys
tem retains full liability.
For systems installed at a height of less than 2.5 m above floor level or other levels
accessible to users, the manufacturer/supplier of the window must conduct
regarding potential harm (violent blows, crushing, wounds) caused to people by normal use
or possible malfunction or accidental breakage of the automated windows, and to
in view of these. Such measures include those
ecommended by the specified standard:
controlling the actuators via a “deadman’s button” placed near the system and within
the operator’s field of view, to ensure that people are out of the way during operation.
be placed at a height of 1.5
m and operated by key if accessible to the
use of contact safety systems (also included in the actuators) that ensure a maximum
closing force of 400/150/25 N, measured in accordance with paragraph BB.20.107.2 of
contact safety systems (lasers, light grids); or:
use of fixed safety barriers that prevent access to moving parts.
Automated windows are deemed adequately protected if they:
are installed at a height of >2.5 m; or:
200 mm and a closing speed of <15 mm/s; or:
are part of a smoke and heat evacuation system for emergency use only.
In any case, moving parts of windows that could fall below 2.5 m following breakage of a
system component need to be fixed or
secured in
order to prevent them from suddenly
: e.g. the use of safety arms on bottom
-
The device is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lacking experience
not allow children to play with the fixed controls and keep any remote
The actuator is destined exclusively for installation indoors. For any special
application we recommend you consult the manufacturer
After removing packaging, check for any damage on the appliance.
Always request exclusive use of original spare parts. Failure to respect this
condition could compromise safety and invalidate the benefits contained in the
In the event of any problems or queries, consult your agent or contact the
TO ENSURE
ER SAFETY
.
The Nekos electrical actuators comply with the Machinery Directive (2006/42/EC), Standard
103 (Particular requirements for drives for gates, doors and windows) and
other directives and regulations indicated in the attached Declarations of Incor
poration and
CE Conformity (at the end of the manual). According to the Machinery Directive, actuators
are “partly completed machinery” intended for incorporation into doors and windows. The
esponsibility, to ensure the
compliance of the entire system with the applicable standards and to issue CE certification.
We strongly discourage any use of the actuators other than that specified and therefore, in
For systems installed at a height of less than 2.5 m above floor level or other levels
accessible to users, the manufacturer/supplier of the window must conduct
risk analysis
regarding potential harm (violent blows, crushing, wounds) caused to people by normal use
or possible malfunction or accidental breakage of the automated windows, and to
in view of these. Such measures include those
controlling the actuators via a “deadman’s button” placed near the system and within
the operator’s field of view, to ensure that people are out of the way during operation.
m and operated by key if accessible to the
use of contact safety systems (also included in the actuators) that ensure a maximum
closing force of 400/150/25 N, measured in accordance with paragraph BB.20.107.2 of
200 mm and a closing speed of <15 mm/s; or:
are part of a smoke and heat evacuation system for emergency use only.
In any case, moving parts of windows that could fall below 2.5 m following breakage of a
order to prevent them from suddenly
The device is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lacking experience
and knowledge. Do
not allow children to play with the fixed controls and keep any remote
-control units
The actuator is destined exclusively for installation indoors. For any special
After removing packaging, check for any damage on the appliance.
Always request exclusive use of original spare parts. Failure to respect this
condition could compromise safety and invalidate the benefits contained in the
In the event of any problems or queries, consult your agent or contact the
