NCR CX5 Manuel utilisateur

Kit Instructions

CX5/CX7 Side Scanner/Imager

7772-K156

Issue B

The product described in this document is a licensed product of NCR Corporation.

NCR is a registered trademark of NCR Corporation. Product names mentioned in this publication may be

trademarks or registered trademarks of their respective companies and are hereby acknowledged.

Where creation of derivative works, modifications or copies of this NCR copyrighted documentation is

permitted under the terms and conditions of an agreement you have with NCR, NCR's copyright notice

must be included.

It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software,

and firmware become available. NCR, therefore, reserves the right to change specifications without prior

notice.

All features, functions, and operations described herein may not be marketed by NCR in all parts of the

world. In some instances, photographs are of equipment prototypes. Therefore, before using this document,

consult with your NCR representative or NCR office for information that is applicable and current.

By NCR Corporation

Global Headquarters

864 Spring St NW

Atlanta, GA 30308

U.S.A.

Revision Record

Issue Date Remarks

AJun 2020 First Issue

BDec 2021 Added Warning statement

CX5/CX7 Side Scanner/Imager

This kit provides an Imager for Port B or Port C of NCR CX7 All-in-One POS (7772) or

NCRCX5 All-in-One POS(7773).

Kit Contents

2 CX5/CX7 Side Scanner/Imager

Installation Procedure

Warning: Disconnect the AC power cord from the AC outlet and wait 30 seconds

before servicing the terminal.

1. Lay the Display face down on a flat surface.

Note: Always use a soft material (cloth, foam) to protect the display screen when

placing the terminal face down.

2. Remove the Cable Cover.

a. Remove the two (2) screws that secure the Cable Cover to the Back Cover.

b. Rotate and unhook the Cable Cover from the Back Cover.

CX5/CX7 Side Scanner/Imager 3

3. Disconnect the Cables.

a. Loosen the thumbscrew of the 180-degree USB-C Cable then disconnect the

Cable.

b. Remove the Ethernet Cable from the Cable Management Hook then disconnect

the Cable.

4. Loosen the two (2) captive screws that secure the Back Cover to the Display.

4 CX5/CX7 Side Scanner/Imager

5. Rotate the Back Cover away from the Display and unhook the Back Cover Tabs.

CX5/CX7 Side Scanner/Imager 5

6. The Imager can be installed on either Port B or Port C. Insert a flat screw driver in

the slot of the desired port to unsnap the Plate from the display housing.

7. Route the Imager Cable through the Port opening.

6 CX5/CX7 Side Scanner/Imager

8. Route and secure the Cable under the Cable Management Hooks as shown, then

connect the Cable to the Motherboard.

9. Tuck the excess Cable under the display housing.

10. Hook the Imager into the display housing and snap into place.

CX5/CX7 Side Scanner/Imager 7

11. Secure the Imager with a screw.

12. Reinstall the Display Back Cover.

13. Reconnect the 180-degree USB-CCable and Ethernet Cable.

14. Reinstall the Cable Cover.

Programming the Imager

To program the imager to work on a Retail or Hospitality (Aloha)POS, refer to the

following sections in the Imager Setup Sheets document (BCC5-0000-5470):

https://onlinehelp.ncr.com/Retail/Scanners/ImagerSetup/HTML/FrontMatter-HTML/Home.htm

•Retail

• Honeywell N6600/N6700 Retail Quick Imager Setup

•Hospitality (Aloha)

• Honeywell N6600 Aloha Programming Sheet

Autres manuels pour CX5

Ce manuel convient aux modèles suivants

Table des matières

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Canon

Canon imageFORMULA CR-120N Manuel utilisateur

Fujitsu

Fujitsu FI-4860C2 Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Fujitsu

Fujitsu fi-4860C Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Fujitsu

Fujitsu CardMinder Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur