Navini Networks Ripwave 2300E/U Manuel utilisateur

e™

™

For use with all Ripwave Modem models

Part Number 40-00097-00

Revision F, Version 1.0

May 21, 2004

Proprietary

All information disclosed by this document is the proprietary property of Navini Networks, Inc. and is protected

by copyright, trademark, and/or trade secret laws. All rights therein are expressly reserved.

Ripwave Modem User Guide Navini Networks, Inc.

TABLE OF CONTENTS

INTRODUCTION.......................................................................................................................................7

PACKAGE INVENTORY.........................................................................................................................7

RIPWAVE MODELS.................................................................................................................................7

OPERATING FREQUENCIES .........................................................................................................................8

COMPUTER CONNECTIONS .........................................................................................................................8

MINIMUM COMPUTING REQUIREMENTS......................................................................................9

PHYSICAL CHARACTERISTICS........................................................................................................10

INSTALLING AN ETHERNET MODEM............................................................................................12

INSTALLING A USB MODEM..............................................................................................................15

ACCESSING THE INTERNET..............................................................................................................19

TROUBLESHOOTING...........................................................................................................................20

INDICATOR LIGHTS OR LCD DISPLAY .....................................................................................................20

INSTALLING NAVINI MONITOR.......................................................................................................21

USING NAVINI MONITOR...................................................................................................................25

UNINSTALLING NAVINI MONITOR.................................................................................................28

INSTALLING NAVINI DIAGNOSTICS...............................................................................................29

USING NAVINI DIAGNOSTICS...........................................................................................................32

UNINSTALLING NAVINI DIAGNOSTICS.........................................................................................35

INSTALLING & CHARGING THE BATTERY..................................................................................36

2.4 GHZ BATTERY...................................................................................................................................36

2.3 GHZ, 2.5 GHZ, 2.6 & 3.5 GHZ BATTERY .........................................................................................37

CARE & MAINTENANCE.....................................................................................................................38

UPGRADING THE MODEM.................................................................................................................38

ADDENDUM 1: RIPWAVE MODEM - PC TROUBLESHOOTING

™............................................39

ADDENDUM 2: END USER SOFTWARE LICENSE AGREEMENT.............................................44

2 Part #40-00097-00 Rev F v1.0

May 21, 2004

Navini Networks, Inc. Ripwave Modem User Guide

Permissions, Trademarks & Distribution

document is confidential and the proprietary property of Navini Networks, Inc. and all rights therein are

expressly reserved. Acceptance of this material signifies agreement by the recipient that the information

contained in this document is confidential and that it will be used solely for the purposes set forth herein.

Acceptance of this material signifies agreement by the recipient that it will not be used, reproduced in

whole or in part, disclosed, distributed, or conveyed to others in any manner or by any means – graphic,

electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval

systems – without the express written permission of Navini Networks, Inc.

Navini Networks, the Navini Networks logo, Internet at the Speed of Thought, Zero-Install, Ripwave,

and Unwired by Navini are trademarks of Navini Networks, Inc. Other product and company names

mentioned herein may be trademarks and/or service marks of their respective owners.

Except for the hardware warranty, nothing herein constitutes any representation, warranty,

assurance, or guaranty of any kind.

Because of continuing developments and improvements in design, manufacturing, and deployment,

material in this document is subject to change without notification and does not represent any

commitment or obligation on the part of Navini Networks, Inc.

Navini Networks, Inc. shall have no liability for any error or damages resulting from the use of this

document.

All Navini Networks logos and trademarks are the property of Navini Networks, Inc. Unauthorized usage

is strictly prohibited without the express written permission of Navini Networks, Inc.

Part #40-00097-00 Rev F v1.0 3

May 21, 2004

Ripwave Modem User Guide Navini Networks, Inc.

Safety

When using Navini Ripwave electronic equipment, always follow basic safety precautions to reduce the

risk of electrical shock, fire, and injury to people and/or property. Follow all warnings and instructions

that come with the equipment.

1. Do not use the equipment while you are in a bathtub, shower, pool, or spa. Exposure of the

equipment to water could cause severe electrical shock or serious damage to the equipment.

2. Do not immerse the equipment in any type of liquid. Use a damp clothe and if needed, water and a

mild detergent to clean the plastic shell. Unplug the equipment from the power source before

cleaning.

3. Follow all airport and FAA regulations when using the equipment on or near aircraft.

4. Only operate the equipment from the type of power source(s) indicated in this manual (110/220

VAC, 60/50 Hz adapter or Navini supplied battery). Any other type of input power source may cause

damage to the equipment.

5. Power the equipment using only the battery or the AC adapter cable provided, and in accordance with

the instructions specified in the user manual.

6. Do not use a frayed or damaged power cord. Do not place the power cord where it can be stepped on

or tripped over.

7. Do not touch wires where the insulation is frayed or worn unless the equipment has been

disconnected from its power source.

8. Do not overload wall outlets, power strips, or extension cords. This can cause serious electrical shock

or fire.

9. Do not place the equipment on an unstable surface. It can fall and cause injury or damage to the

equipment.

10. Do not disassemble the equipment. Removing covers exposes dangerous voltages or other risks and

also voids the warranty. Incorrect reassembly can cause equipment damage or electrical shock. Only

an authorized repair technician should service this product.

11. Do not expose the equipment to extreme hot or cold temperatures.

12. Do not use the equipment under the following conditions:

• When the equipment has been exposed to water or moisture.

• When the equipment has been damaged.

• When the power cord is damaged or frayed.

• When the equipment does not operate properly or shows a distinct change in performance.

4 Part #40-00097-00 Rev F v1.0

May 21, 2004

Navini Networks, Inc. Ripwave Modem User Guide

Regulatory Information

FCC Notice

CAUTION: This device is a Radio Frequency transmitter. It is required to comply with FCC RF

exposure requirements for transmitting devices. A minimum separation distance of 8 inches (20

cm) or more must be maintained between the antenna and all persons during device operations to

ensure compliance with the FCC’s rules for Radio Frequency Exposure. If this minimum distance

cannot be maintained, exposure to RF levels that exceed the FCC’s limits may result.

FCC Compliance and Advisory Statement

This equipment has been tested and found to comply with the limits for a class B digital device,

Pursuant to Part 15 of the FCC rules. The operation is subject to the following two conditions:

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE US

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause

undesired operation.

These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed or used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna,

2) Increase the separation between the equipment and the receiver,

3) Connect the equipment to an outlet on a circuit that is different from the one to which the

receiver is connected,

4) Consult the dealer or an experienced radio/TV technician for additional suggestions.

INFORMATION TO USER

This device has been authorized as a radio frequency transmitter under the appropriate rules of the

Federal Communications Commission. Any changes or modifications not expressly approved by

Navini Networks could void the user’s authority to operate the equipment.

Part #40-00097-00 Rev F v1.0 5

May 21, 2004

Ripwave Modem User Guide Navini Networks, Inc.

Battery Precautions

CAUTION! To reduce risk of injury or fire, follow these instructions when handling the battery.

1. Risk of explosion is possible if the battery is replaced with one not supplied by Navini Networks.

2. Do not dispose of the battery in a fire. They may explode. Check with the local codes for battery

disposal guidelines.

3. Do not open or mutilate the battery. The battery contains substances that are toxic, corrosive, or

harmful to humans. If battery substances come in contact with the skin, seek medical help

immediately.

4. Do not attempt to recharge the battery by any means except per the instructions in this manual.

5. Remove the battery from the equipment if the equipment is not going to be used for a long period of

time. The battery could leak and cause damage to the equipment.

6. Exercise care when handling the battery to prevent shorting the battery with conducting materials

such as bracelets, rings, and keys.

7. Store the battery pack in a dry place, 0 to +40 degrees Celsius.

8. Dispose of used batteries according to environmental guidelines.

6 Part #40-00097-00 Rev F v1.0

May 21, 2004

Navini Networks, Inc. Ripwave Modem User Guide

Introduction

Package

Inventory

Ripwave Models

Congratulations! The Ripwave™Modem is a user-friendly, easy-to-

install device that helps you connect wirelessly to the Internet. It

provides complete broadband Internet access to residential and

small office/home office (SOHO) customers without the necessity

of professional hardware installation. The Ripwave Modem also

provides nomadic service availability as a computer with this

device is moved from room to room, location to location, or even

city to city as long as there is coverage in the area.

Please verify the contents of your Ripwave Modem package. If you

do not find all of these items in your package, notify the supplier

from whom you obtained it.

• Ripwave Modem

• Ripwave Modem AC power adapter

• PC-to-Ripwave Modem cable (USB or Ethernet straight cable)

• Ripwave Modem User Guide (on CD)

• Ripwave Modem Quick Installation Guide

• Ripwave Monitor Installation CD

Your Ripwave Modem will operate in either the 2.3 GHz, 2.4 GHz,

2.5 GHz, 2.6 GHz, 3.4 GHz, or 3.5 GHz range. Within each

frequency range there are several model types, described on the

next page. The 2.4 GHz Modem varies slightly in appearance.

Also, in Release 4.0, the 2.4 GHz Modem is available in both an

LED and LCD version. In the future, an LCD version of the

Modem will be available for the 2.5, 2.6 and 3.5 GHz Modems.

2.4 GHz LED

Modem 2.3, 2.5, 2.6, 3.4 & 3.5

GHz Modem

2.4 & 3.5 GHz

LCD Modem

Part #40-00097-00 Rev F v1.0 7

May 21, 2004

Ripwave Modem User Guide Navini Networks, Inc.

Operating

Frequencies

Computer

Connections

Modem Model Frequency Range Operating

Band

2.3 GHz 2300E/U 2.305 GHz to 2.385 GHz WCS+

2.4 GHz 2400 E/U 2.400 GHz - 2.480 GHz ISM

2.5 GHz 2500 E/U 2.500 GHz - 2.596 GHz MMDS/ITFS

2.6 GHz 2600 E/U 2.596 GHz – 2.686 GHz MMDS/ITFS

3.4 GHz 3400 E/U 3.410 GHz – 3.525 GHz BWA/FWA

3.5 GHz 3500 E/U 3.500 GHz – 3.600 GHz BWA/FWA

The “E” in the model name stands for Ethernet, and the “U” in the

model name stands for Universal Serial Bus (USB). Your computer

will have one of these two types of ports for connecting the

Modem.

• An Ethernet connection will function with any Win32

Operating System (Windows®95 or later).

• A USB connection will function only with Windows 98,

Windows 98SE, Windows 2000, Windows ME, or Windows

XP. It will not work with Windows 95 or Windows NT.

You must have the Ripwave Modem model with the appropriate

connection for your computer port.

8 Part #40-00097-00 Rev F v1.0

May 21, 2004

Navini Networks, Inc. Ripwave Modem User Guide

Minimum

Computing

Requirements

(See, also, Addendum 1)

Operating

System1: Ethernet Modems: Any Win32® Operating System

(OS) - Windows®95, Windows 982, Windows

98SE2, Windows 2000, Windows ME2, Windows

XP, or later version. Windows XP must be Service

Pack Level 1 or higher. Internet Explorer 3.0 or

higher is required for installation on Windows 95

Operating Systems.3

USB Modems: Windows®982, Windows 98SE2,

Windows 2000, Windows ME2, Windows XP,

or later version. USB will not work with Windows

95 or Windows NT. Windows XP must be Service

Pack Level 1 or higher. 3

General Information:

 Ensure that the pc network port is enabled.

 MacIntosh systems and Lynx/Unix systems are

not supported.

CPU: Pentium level or higher

RAM: 32 MB or the Operating System minimum,

whichever is greater

Hard Drive: 10 MB free disk space for Navini Monitor software

Monitor: 256 colors, 800 x 600 resolution

1NOTE: If you are going to upgrade your Operating System after loading the

Navini Monitor or Navini Diagnostics software, you must first uninstall Navini

Monitor or Navini Diagnostics prior to upgrading the OS. Otherwise, the Navini

Monitor or Navini Diagnostics will not work. See Uninstall instructions in this

Guide.

2NOTE: The Ripwave Modem must be left powered ON whenever you shut

down or restart any Windows 98 or ME platforms. If the Modem is off, a blue

screen appears on the monitor. In the event that happens you will most likely

have to power cycle the PC.

3NOTE: Navini Diagnostics Tool software is supported on Win98, Win98SE,

Win2000, WinME, WinXP or higher, Mac X or higher,or Red Hat Linux 8.0 or

higher.

The Ripwave Modem installation sections include instructions for

both Ethernet and USB connections. Be sure to use the instructions

that apply to your Ripwave model. The Navini Monitor software

installation procedure is the same for any of the Ripwave models.

This manual will guide you through the simple process of installing

the Ripwave Modem and software, which has been developed to

optimize the ease and convenience for you, our valued customer.

The 2.6 GHz model is used in most of the illustrations in this

manual where there are no differences in the 2.3, 2.4, 2.5, 2.6, 3.4

& 3.5 GHz models.

Part #40-00097-00 Rev F v1.0 9

May 21, 2004

Ripwave Modem User Guide Navini Networks, Inc.

Physical

Characteristics

If you experience any difficulties with your unit, please contact

your Service Provider or the vendor from whom you obtained your

Ripwave Modem.

The 2.4 GHz Ripwave Modem varies in some aspects from the 2.3,

2.5, 2.6, 3.4 and 3.5 Modems. As well, the Ethernet connection on

any model varies from a USB connection. Notice the differences

highlighted in the photos below and on the following page.

2.4 GHz LED Ripwave Modem

Antenna

Indicator Lights

On/Off Switch

Power Adapter

Connection

Ethernet Cable

Connection

Back of 2.4 E Back of 2.4 U

USB Cable

Connection

Antenna

Indicator Lights

On/Off Switch

Power Adapter

Connection

Ethernet Cable

Connection

Back of 2.4 E Back of 2.4 U

USB Cable

Connection

10 Part #40-00097-00 Rev F v1.0

May 21, 2004

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Navini Networks Modem

Navini Networks

Navini Networks Ripwave 40-00097-00 Manuel utilisateur

Navini Networks

Navini Networks Ripwave MX Manuel utilisateur

Navini Networks

Navini Networks Ripwave Manuel utilisateur

Navini Networks

Navini Networks Ripwave-MX 2400-2483 LMX E Manuel utilisateur

Navini Networks

Navini Networks Ripwave Surfer 1239 Manuel utilisateur

Navini Networks

Navini Networks Ripwave CPE Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur