Nauticam M67 Manuel utilisateur

Ce manuel convient aux modèles suivants

1

Autres manuels Nauticam Accessoires pour appareils photo

Nauticam

Nauticam NA-GX8 Manuel utilisateur

Nauticam

Nauticam NA-60D Manuel utilisateur

Nauticam

Nauticam NA-GX1 Manuel utilisateur

Nauticam

Nauticam 26302 Manuel utilisateur

Nauticam

Nauticam NA-A7IV Manuel utilisateur

Nauticam

Nauticam 36060 Manuel utilisateur

Nauticam

Nauticam NA-5DIV Manuel utilisateur

Nauticam

Nauticam 21230 Manuel utilisateur

Nauticam

Nauticam NA-A7RV Manuel utilisateur

Nauticam

Nauticam NA-EM1 Manuel utilisateur

Nauticam

Nauticam NA-Z7 Manuel utilisateur

Nauticam

Nauticam 36206 Manuel utilisateur

Nauticam

Nauticam 16339 Manuel utilisateur

Nauticam

Nauticam 19569 Manuel utilisateur

Nauticam

Nauticam NA-S1H Manuel utilisateur

Nauticam

Nauticam RC1022-F Manuel utilisateur

Nauticam

Nauticam 37169 SFE28135-Z Manuel utilisateur

Nauticam

Nauticam 36167 Manuel utilisateur

Nauticam

Nauticam NA-E2F Manuel utilisateur

Nauticam

Nauticam NA-RX100IV Manuel utilisateur

Nauticam

Nauticam NA-LX100 Manuel utilisateur

Nauticam

Nauticam Mounting Ball 17958 Manuel utilisateur

Nauticam

Nauticam NA-D700 Manuel utilisateur

Nauticam

Nauticam NA-7D Manuel utilisateur

Manuels Accessoires pour appareils photo populaires d'autres marques

Viltrox

Viltrox EF-NEX Instructions d'installation

Calumet

Calumet 7100 Series CK7114 Manuel utilisateur

Ropox

Ropox 4Single Series Manuel utilisateur

Cambo

Cambo Wide DS Digital Series Mode d'emploi

Samsung

Samsung SHG-120 Manuel utilisateur

Ryobi

Ryobi BPL-1820 Manuel d'utilisation

Aegis

Aegis ABL-36020P Manuel utilisateur

Pentax

Pentax Data Back Fc Manuel utilisateur

Fantasea

Fantasea EyeGrabber F Series Manuel utilisateur

Honeywell

Honeywell HDZ20HD Manuel utilisateur

EGO

EGO BA1400T Manuel utilisateur

Sima

Sima SRW-62 Manuel utilisateur

Shape

Shape A7SSMKIT Manuel utilisateur

Slide Kamera

Slide Kamera HST-2 Manuel utilisateur

Power works

Power works 2902613 Manuel utilisateur

SES

SES SE-2047-2 Manuel utilisateur

Olympus

Olympus PT-EP05L Manuel utilisateur

Starlite

Starlite OctoDome nxt Manuel utilisateur

Current as of 2019-03-18

Instruction Manual for

M67 Double Flip Holder

for M67 Macro Ports

PN# 25108

FOREWORD

Thank you for your purchase of a NAUTICAM product.

At NAUTICAM, we pride ourselves in the ability to recognize the

requirements of professional as well as amateur underwater

photographers and fulfill them through the innovative designs of our

products. We strive to achieve a high level of user-friendliness by

allowing stress-free installation and easy operation of all important

functions of the camera.

Please read this manual carefully before using the product, this will

maximize its performance as well as its lifetime.

WARRANTY

All NAUTICAM Products are warranted against any material and

manufacturing defects for two years from the date of purchase for

consumer use. This warranty only applies to products purchased from

authorized NAUTICAM dealers and does not extend beyond the original

retail purchaser.

To return your product for service, please contact your regional

authorized service center(s). Please note that this warranty only applies

when the product is purchased in the territory where the service center

is located.

NAUTICAM does not hold responsibility for damage, of any nature, to

any equipment used with and/or placed within our products.

NAUTICAM accepts no liability for any loss of captured images or the

inability to capture images even if it is due to the malfunctioning of our

products.

Unauthorized modifications and/or repairs of our products will

automatically invalidate the warranty.

INSTALL TO THE PORT

1. Press the lever and flip the holder to the side

2. Remove the locking ring from the flip holder

3. Align the two positioning screws on the back

of the holder with the slots on the front of

the port.

The position of the flip holder can be

changed by relocating the two screws in the

threaded holes around holder.

Current as of 2019-03-18

Soak the flip holder in fresh water after each dive and use

air blower to remove any sands or dusts in the hinge part.

*This M67 Double flip holder has been designed to use with

Naticam Wet Lenses, such as MWL, SMC and CMC, which means

that this holder has to support the weight of those lenses. Hence,

tightness of the hinge is necessary and normal.

Remark: All Nauticam product manual will be changed to e-manual in end of

2018. Please download corresponding product manuals on Nauticam.com

website, or contact us for e-manuals.

CARE AND MAINTENANCE

4. Fasten the holder by screwing the locking

ring into the thread on the front of the

port.

5. To un-mount the double flip holder from

the port, reverse the above steps.