National Instruments GPIB-PCIIB Manuel utilisateur

National Instruments GPIB-PCIIB Manual

Get Pricing & Availability at

ApexWaves.com

Call Today: 1-800-915-6216

Email: sales@apexwaves.com

https://www.apexwaves.com/modular-systems/national-instruments/gpib-instrument-control-modules/GPIB-PCIIB

Getting Started with Your

GPIB-PCIIB and the

NI-488® Software for

MS-DOS

June 1994 Edition

Part Number 320226B-01

National Instruments Corporate Headquarters

6504 Bridge Point Parkway

Austin, TX 78730-5039

(512) 794-0100

Technical support fax: (800) 328-2203

(512) 794-5678

Branch Offices:

Australia (03) 879 9422, Austria (0662) 435986, Belgium 02/757.00.20,

Canada (Ontario) (519) 622-9310, Canada (Québec) (514) 694-8521,

Denmark 45 76 26 00, Finland (90) 527 2321, France (1) 48 14 24 24,

Germany 089/741 31 30, Italy 02/48301892, Japan (03) 3788-1921,

Netherlands 03480-33466, Norway 32-848400, Spain (91) 640 0085,

Sweden 08-730 49 70, Switzerland 056/20 51 51, U.K. 0635 523545

Limited Warranty

The GPIB-PCIIB is warranted against defects in materials and

workmanship for a period of two years from the date of shipment, as

evidenced by receipts or other documentation. National Instruments will, at

its option, repair or replace equipment that proves to be defective during the

warranty period. This warranty includes parts and labor.

The media on which you receive National Instruments software are

warranted not to fail to execute programming instructions, due to defects in

materials and workmanship, for a period of 90 days from date of shipment,

as evidenced by receipts or other documentation. National Instruments will,

at its option, repair or replace software media that do not execute

programming instructions if National Instruments receives notice of such

defects during the warranty period. National Instruments does not warrant

that the operation of the software shall be uninterrupted or error free.

A Return Material Authorization (RMA) number must be obtained from the

factory and clearly marked on the outside of the package before any

equipment will be accepted for warranty work. National Instruments will

pay the shipping costs of returning to the owner parts which are covered by

warranty.

National Instruments believes that the information in this manual is

accurate. The document has been carefully reviewed for technical

accuracy. In the event that technical or typographical errors exist, National

Instruments reserves the right to make changes to subsequent editions of

this document without prior notice to holders of this edition. The reader

should consult National Instruments if errors are suspected. In no event

shall National Instruments be liable for any damages arising out of or

related to this document or the information contained in it.

EXCEPT AS SPECIFIED HEREIN, NATIONAL INSTRUMENTS MAKES NO

WARRANTIES, EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIMS

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. CUSTOMER’S RIGHT TO RECOVER DAMAGES

CAUSED BY FAULT OR NEGLIGENCE ON THE PART OF NATIONAL

INSTRUMENTS SHALL BE LIMITED TO THE AMOUNT THERETOFORE

PAID BY THE CUSTOMER. NATIONAL INSTRUMENTS WILL NOT BE

LIABLE FOR DAMAGES RESULTING FROM LOSS OF DATA, PROFITS,

USE OF PRODUCTS, OR INCIDENTAL OR CONSEQUENTIAL DAMAGES,

EVEN IF ADVISED OF THE POSSIBILITY THEREOF. This limitation of the

liability of National Instruments will apply regardless of the form of action,

whether in contract or tort, including negligence. Any action against

National Instruments must be brought within one year after the cause of

action accrues. National Instruments shall not be liable for any delay in

performance due to causes beyond its reasonable control. The warranty

provided herein does not cover damages, defects, malfunctions, or service

failures caused by owner’s failure to follow the National Instruments

installation, operation, or maintenance instructions; owner’s modification of

the product; owner’s abuse, misuse, or negligent acts; and power failure or

surges, fire, flood, accident, actions of third parties, or other events outside

reasonable control.

Under the copyright laws, this publication may not be reproduced or

transmitted in any form, electronic or mechanical, including photocopying,

recording, storing in an information retrieval system, or translating, in

whole or in part, without the prior written consent of National Instruments

Corporation.

Trademarks

NI-488®are trademarks of National Instruments Corporation.

Product and company names listed are trademarks or trade names of their

respective companies.

Warning Regarding Medical and Clinical Use

of National Instruments Products

National Instruments products are not designed with components and testing

intended to ensure a level of reliability suitable for use in treatment and

diagnosis of humans. Applications of National Instruments products

involving medical or clinical treatment can create a potential for accidental

injury caused by product failure, or by errors on the part of the user or

application designer. Any use or application of National Instruments

products for or involving medical or clinical treatment must be performed

by properly trained and qualified medical personnel, and all traditional

medical safeguards, equipment, and procedures that are appropriate in the

particular situation to prevent serious injury or death should always continue

to be used when National Instruments products are being used. National

Instruments products are NOT intended to be a substitute for any form of

established process, procedure, or equipment used to monitor or safeguard

human health and safety in medical or clinical treatment.

FCC/DOC Radio Frequency

Interference Compliance

This equipment generates and uses radio frequency energy and, if not

installed and used in strict accordance with the instructions in this manual,

may cause interference to radio and television reception. This equipment

has been tested and found to comply with the following two regulatory

agencies:

Federal Communications Commission

This device complies with Part 15 of the Federal Communications

Commission (FCC) Rules for a Class B digital device. A Class B device is

distinguishable from a Class A device by the appearance of an FCC ID

number located on the Class B device.

Canadian Department of Communications

This device complies with the limits for radio noise emissions from digital

apparatus set out in the Radio Interference Regulations of the Canadian

Department of Communications (DOC).

Le présent appareil numérique n’émet pas de bruits radioélectriques

dépassant les limites applicables aux appareils numériques de classe B

prescrites dans le règlement sur le brouillage radioélectrique édicté par le

ministère des communications du Canada.

Instructions to Users

These regulations are designed to provide reasonable protection against

interference from the equipment to radio and television reception in

residential areas.

There is no guarantee that interference will not occur in a particular

installation. However, the chances of interference are much less if the

equipment is installed and used according to this instruction manual.

If the equipment does cause interference to radio or television reception,

which can be determined by turning the equipment on and off, one or more

of the following suggestions may reduce or eliminate the problem.

• Operate the equipment and the receiver on different branches of your

AC electrical system.

• Move the equipment away from the receiver with which it is interfering.

• Reorient or relocate the receiver’s antenna.

• Be sure that the equipment is plugged into a grounded outlet and that

the grounding has not been defeated with a cheater plug.

Notice to user: Changes or modifications not expressly approved by

National Instruments could void the user’s authority

to operate the equipment under the FCC Rules.

If necessary, consult National Instruments or an experienced radio/television

technician for additional suggestions. The following booklet prepared by

the FCC may also be helpful: How to Identify and Resolve Radio-TV

Interference Problems. This booklet is available from the U.S. Government

Printing Office, Washington, DC 20402, Stock Number 004-000-00345-4.

Contents

About This Manual

Organization of This Manual.....................................................xi

Conventions Used in This Manual.............................................xi

Customer Communication .........................................................xii

Chapter 1

Introduction........................................................................................1-1

What You Need to Get Started ..................................................1-1

Optional Equipment...................................................................1-1

Chapter 2

Hardware Configuration and Installation.............................2-1

Configuration .............................................................................2-1

Switch and Jumper Settings.........................................2-2

Base I/O Address Selection.........................................2-3

Interrupt Selection .......................................................2-5

DMA Channel Selection..............................................2-6

Wait State Generator....................................................2-8

Installation..................................................................................2-9

Chapter 3

Software Installation and Configuration................................3-1

The NI-488 Software Package...................................................3-1

Main Programs and Files.............................................3-1

Additional Programs and Files ....................................3-2

Installing the Software ...............................................................3-3

Step 1. Preparation ....................................................3-3

Step 2. Run IBSTART ..............................................3-4

Accessing IBSTART.....................................3-4

Running IBSTART .......................................3-4

Step 3. Configure the Software (optional) ................3-6

Step 4. Restart (optional)...........................................3-7

Step 5. Test the Software Installation........................3-8

Step 6. Developing Your Application Program ........3-9

Contents

GPIB-PCIIB/MS-DOS x © National Instruments Corp.

More About IBCONF ................................................................3-9

Characteristics of the Instruments ...............................3-9

Characteristics of Each GPIB-PCIIB Board................3-10

Default Configurations ................................................3-11

Primary Default Characteristics ..................................3-11

Specific Board Characteristics of IBCONF for the

GPIB-PCIIB ................................................................3-12

Disable Device Unaddressing (Board

Characteristic Only) ......................................3-12

Running IBCONF........................................................3-12

Exiting IBCONF..........................................................3-13

Chapter 4

Using Your GPIB-PCIIB ..............................................................4-1

Appendix

Customer Communication............................................................A-1

Glossary................................................................................................G-1

Figures

Figure 2-1. GPIB-PCIIB Parts Locator Diagram ..................................2-1

Figure 2-2. Base I/O Address Switch Settings ......................................2-4

Figure 2-3. Interrupt Jumper Setting Options........................................2-5

Figure 2-4. DMA Channel Jumper Setting Options ..............................2-7

Figure 2-5. Wait-State Generator Settings ............................................2-8

Tables

Table 2-1. Factory Default Settings and Optional

Configurations ....................................................................2-2

Table 2-2. DMA Channels for the GPIB-PCIIB ..................................2-6

Table des matières

Autres manuels National Instruments Matériel informatique

National Instruments

National Instruments USRP-2940 Manuel utilisateur

National Instruments

National Instruments PCI-DIO-96 Manuel utilisateur

National Instruments

National Instruments AT-GPIB/TNT Manuel utilisateur

National Instruments

National Instruments ExpressCard Strain-Relief Manuel utilisateur

National Instruments

National Instruments NI VXIpc-882 Manuel utilisateur

National Instruments

National Instruments NI PXIe-8133 Manuel utilisateur

National Instruments

National Instruments PXI-6031E Manuel utilisateur

National Instruments

National Instruments DAQ PCI-1200 Manuel utilisateur

National Instruments

National Instruments NI-9260 Manuel utilisateur

National Instruments

National Instruments NI PXIe-8103 Manuel utilisateur

National Instruments

National Instruments FieldPoint cFP-1808 Manuel utilisateur

National Instruments

National Instruments DAQ X NI 634 Series Manuel utilisateur

National Instruments

National Instruments PXIe-8106 Manuel utilisateur

National Instruments

National Instruments 9260 Manuel utilisateur

National Instruments

National Instruments PCI-6034E Manuel utilisateur

National Instruments

National Instruments NI Real-Time Hypervisor Manuel utilisateur

National Instruments

National Instruments PCI-7041 Manuel utilisateur

National Instruments

National Instruments Two-Slot Embedded Controller NI PXI-8183 Manuel utilisateur

National Instruments

National Instruments 8-Slot PXI Backplane Manuel utilisateur

National Instruments

National Instruments PXI-8101 Manuel utilisateur

National Instruments

National Instruments Isolated Analog Output Module SCC-AO10 Manuel utilisateur

National Instruments

National Instruments Multifunction RIO PXI-7830 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

National Instruments

National Instruments PXIe-8115 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur

Advantech

Advantech ASMB-935 Series Manuel utilisateur