Natec Genesis GX69 Manuel utilisateur
Natec Genesis GX69 1
EN –NATEC GENESIS GX69 –USER MANUAL
I. Introduction
Natec Genesis GX69 is a wired gaming mouse with 10 fully customizable
buttons, high precision optical engine, adjustable length and comfortable design.
II. Features
-High-end optical engines, precise positioning
-Adjustable resolution up to 4000DPI
-Different LED indicator colors
-Two modes of LED lightning: full lightened and breathing.
-10 fully programmable keys –more than 40 settings to choose for each
-Adjustable polling rate: 125/250/500/1000 Hz.
-Advanced profiles management
-Ergonomic design
-Adjustable length
-Removable weight blocks.
A. Adjusting length and weight
Genesis GX69 allows you to adjust the length and weight of the device to suit
your demands.
Natec Genesis GX69 2
Adjusting length
Turn the screw on the palm rest:
- clockwise to move the plastic cover closer to the mouse, thus shorten the
device,
- counterclockwise to lengthen the mouse.
Adjusting weight
1. Keep turning the screw on the palm rest counterclockwise until you can
completely remove it and the plastic overlay.
2. Slide the weight blocks case to the unlocked position (marked with the open
padlock)
3. Pull the weight blocks case to remove it
4. Remove/add the blocks from/to the case
5. Insert the weight blocks case back in its compartment and slide the case to the
locked position
6. Place back the plastic cover and insert the screw, turning it clockwise.
III. Driver description
A. System
- Compatible with Windows XP/Vista/7 operation system
- USB (1.1/2.0) port
- CD-ROM drive (for installing the driver from CD attached) / internet
connection (for downloading the driver)
- 50 MB of hard disk space
- Screen resolution: minimum 1024x768
Natec Genesis GX69 3
B. Windows XP/Vista/7 installation guide
1. Insert the Genesis GX69 gaming mouse USB plug into the computer USB
port
2. Insert the Genesis GX69 driver CD into the CD-ROM drive (or download
the driver from www.natec-europe.com)
3. Launch the setup application and click next on the window displayed
4. Select the install path, then click next
5. Wait for the end of the installing process
6. Click finish
7. You are ready to use the device.
IV. Mouse configuration
A. Button settings
Button settings tab allows you to assign individual functions to each button.
You can bind one of more than 40 functions to keys labeled by numbers on the
schema above. In the right side of the window, you can see actual configuration
of the buttons. Each position on the list is in fact a combo box, from which you
can choose a preferred function for an individual button.
Natec Genesis GX69 4
On-To-Go
The On-To-Go function works similarly to the fire button –but, as fire button
simulates repeating presses of left button of the mouse, the On-To-Go can do so
with any button of the mouse. To use this function:
1. Assign On-To-Go to any button in the Button Settings
2. Click Apply
3. Hold down the On-To-Go button and the button that you want to press
repeatedly.
Defining Macros
In brief speaking, a macro is a series of actions that you can bind to the mouse.
More precisely, macro is a recorded sequence of key presses, releases and time
delays between them. Output delays can be recorded or predefined by user.
To define a macro, you have to choose from available function list assign
macro, and then macro manager.
Adding a macro:
1. Click new
2. Choose name for your macro
3. Click start record
4. Press desired sequence of keys
5. Press stop record
Natec Genesis GX69 5
Now you can assign your macro to the key by selecting it from group assign
macro on the list related to the programmed key.
Deleting macros:
1. Open macro manager
2. Choose a macro from the list
3. Click delete
Additional options:
Record delays between key commands –you can choose whether to record time
intervals between pressing and releasing the keys
Loop times –you can define how many times macro should be used after single
button press.
B. Advanced Settings
In this tab, you can adjust advanced settings of the mouse.
Polling rate –defines how often the mouse sends information of its position to
the computer. Available options: 125/250/500/1000Hz
On-To-Go Speed –defines time intervals between key presses simulated by the
On-To-Go function
Natec Genesis GX69 6
Restoring factory defaults
To restore factory defaults, click reset in the advanced settings tab. Warning –
resetting the configuration will delete all settings and macros stored in the
driver!
C. Light Settings
Light effect switch –turns on/off light effects on the mouse
Light effect type options –allows you to choose the type of LED effects of the
mouse. Full lightened option causes constant luminance of diode while color
changing; breathing setting means that the diode will slowly pulse.
Choose a Single Color –allows you to manually set single desired color of
luminance. If turned off, the color of diode constantly changes.
Natec Genesis GX69 7
D. Sensitivity settings
Sensitivity options –using the sliders you can adjust sensitivity for axis X and Y
at once (when X/Y synchronous working box is checked) or separately (if
unchecked).
DPI Setting –defines the resolution (DPI –dots per inch) of the mouse.
Available options –400-4000 DPI. It is possible to predefine up to four DPI
profiles (don't confuse them with gaming profiles), which then can be switched
"on the fly" using the mouse buttons. Unchecking the box on the left side of
each slider will exclude that specific setting from available adjustments, without
erasing it.
E. System Settings
The settings here are related rather to an operation system, than to hardware
itself. System settings allow you to change the way your system interprets
signals from the mouse.
Natec Genesis GX69 8
Double click –defines how long the time interval between two clicks should be
to interpret them as a double click
Windows pointer speed –allows you to change the speed of the screen cursor
Enhance pointer precision –provides slight support in precise movement of the
cursor
Tilt wheel scroll speed –defines the speed of horizontal scrolling
Mouse wheel scroll speed –defines the speed of vertical scrolling. You can
adjust using the slider or choose option 1 Page, which will activate full pages
scrolling.
F. Profile management
Natec Genesis GX69 allows you to create different gaming profiles of settings
and assign them to individual games or applications. Up to five profiles can be
stored in the driver –other have to be saved to your hard disk. Switching
between profiles is possible by the driver interface, mouse buttons with assigned
profile-related functions or automatically –by launching an application linked to
the profile.
Natec Genesis GX69 9
Creating a profile
1. Click create in the driver interface
2. Type the name for the profile
3. In the path to executable box insert path to the executable file (.exe) of the
application you want to be assigned to the profile
Editing a profile
1. Click edit on the driver interface
2. Edit the name and path to assigned application accordingly to your needs
Saving a profile
1. Click save on the driver interface
2. Choose the folder you want to save profile to and name for the file
Loading a profile
1. Click load on the driver interface
2. Choose the file with the profile you need
V. General
Non-authorized repairs or taking the device to pieces make the warranty
void and may cause the product damage.
Do not use the product in low and high temperatures and in the dusty
atmosphere.
Do not connect / disconnect the product to / from a computer when it is on.
The safe product, conforming to the EU requirements.
The product is made in accordance with RoHS European standard. The
standard was issued in order to decrease the amount of the electronic and
electrical waste emitted into the atmosphere.
The WEEE symbol (the crossed-out wheeled bin) using indicates that this
product in not home waste. You protect the environment when you recycle
hazardous waste appropriately. In order to get detailed information about
recycling this product please contact your retailer or a local authority.
Natec Genesis GX69 10
PL –NATEC GENESIS GX69 –INSTRUKCJA OBSŁUGI
I. Wstęp
Natec Genesis GX69 jest przewodową myszą dla graczy wyposażoną w 9 w
pełni programowalnych przycisków, precyzyjny układ optyczny,
konfigurowalną długość oraz wygodny profil.
II. Cechy
-Najwyższej jakości układ optyczny, precyzja pozycjonowania
-Konfigurowalna rozdzielczość do 4000DPI
-Zróżnicowane kolory wskaźnika LED, zmienne w zależności od
rozdzielczości
-Dwa tryby podświetlenia LED: w pełni podświetlony i pulsujący
-10 w pełni programowalnych przycisków – ponad 40 ustawień do wyboru
dla każdego
-Konfigurowalna częstotliwość pracy: 125/250/500/1000 Hz.
-Zaawansowane zarządzanie
-Ergonomiczny design
-Konfigurowalna długość myszy
-Wymienialne bloczki obciążające mysz.
A. Zmiana długości i wagi
Genesis GX69 pozwala Tobie na dobranie długości i wagi urządzenia tak, aby
dopasować je do Twoich wymagań.
Table des matières
Langues :
Autres manuels Natec Souris
Natec
Natec MOUSE LYNX Manuel utilisateur
Natec
Natec Euphonie Manuel utilisateur
Natec
Natec HAWK Manuel utilisateur
Natec
Natec HARRIER 2 Manuel utilisateur
Natec
Natec VIREO NMY-1612 Manuel utilisateur
Natec
Natec Genesys GX57 Manuel utilisateur
Natec
Natec SISKIN 2 Manuel utilisateur
Natec
Natec PIGEON 2 Manuel utilisateur
Natec
Natec FALCON Manuel utilisateur
Natec
Natec PIGEON Manuel utilisateur
Natec
Natec TETRA Manuel utilisateur
Natec
Natec Genesis GX85 Manuel utilisateur
Natec
Natec Genesis GX66 Manuel utilisateur
Natec
Natec JAY Manuel utilisateur
Natec
Natec OSPREY Manuel utilisateur
Natec
Natec VIREO 2 Manuel utilisateur
Natec
Natec Robin Manuel utilisateur
Natec
Natec NMY-1688 Manuel utilisateur
Natec
Natec Martin Manuel utilisateur
Natec
Natec BLACKBIRD 2 Manuel utilisateur
