Nanoxia Deep Silence 5 Rev. B Manuel utilisateur
I. Introducon
• Specicaons
• Accessories
• Features
II. Installaon Instrucons
1. Installaon of the motherboard
2. Installaon of external drives
2.1 Opcal drives
2.2 Ulizing the external 3.5 inch bay
3. Installaon opons of HDD’s
3.1 Mounng of hard disk drives
3.2 Conversion and removal of the HDD-cages
3.3 Ulizing the 6 x 2.5 inch mounng frame
4. Removing the front panel
5. Fan assembly
5.1 Front fans
5.2 Fans under the top cover
5.3 Fan at the boom of the case
6. The 2-channel fan control
6.1 Connecng the fans to the fan control
6.2 Operaon of the fan control
7. Installaon of a water cooling
7.1Installaon of a radiator or compact water cooling behind the front
7.2 Installaon of a radiator or compact water cooling under the top cover
8. The I/O-Panel
III. Support
________________________________________________________________02
__________________________________________________________02
________________________________________________________________02
_______________________________________________________________03
________________________________________________________06
___________________________________________________06
________________________________________________07
___________________________________________________07
______________________________________07
____________________________________________________07
_______________________________________________08
______________________________08
___________________________________09
_______________________________________________10
________________________________________________11
_____________________________________________11
______________________________________________12
______________________________________________12
_______________________________________________13
_______________________________13
___________________________________________14
______________________________________________14
_____14
____15
___________________________________________________________15
________________________________________________________________16
01
EN
I. Introducon
Congratulaons on the purchase of your new Nanoxia Deep Silence 5 Revision B. We are condent
that you will be delighted by your new PC case for many years to come.
The Nanoxia Deep Silence series has already won more than 100 awards from the internaonal
trade press. The innovave design and the exceponal quality certainly delight experts and
enthusiasts alike.
Based on the suggesons of our customers, our design team has developed meaningful op-
mizaons in the context of product development, which you will nd in the present revision.
For example, our designers have created a novel 6 x 2.5 inch mounng frame, which allows the
space saving and decoupled mounng of up to six 2.5 inch drives.
In the new revision, the Deep Silence 5 Tower provides plenty of space for your most demanding
projects. Due to the modular hard drive cages, the case oers maximum versality and compa-
bility, both for water cooling project and the installaon of high-end systems with air cooling.
Specicaons
Dimensions: 552 x 232 x 550 mm (Height x Width x Depth)
Material: Steel, plascs
External drive bays: 3 x 5,25 inch (tool-free)
1 x 5.25 inch /w 3.5 inch adapter (tool-free)
Internal drive bays: 8 x 2.5/3.5 inch bays (max. 11)
6 x 2.5 inch
Rubber sealings for
tube holes
EPS 4+4-Pin extension 24-Pin ATX extension Fan screws Stand-offs
for mainboard
Screws for
mainboard mounting
Screws for
HDD mounting
Screws for
3.5” mounting frame
Mounting screws for
2.5“HDD/SSD
Mounting screws for
2.5“HDD/SSD (long)
Mounting screws
for PSU
Thumbscrews
Accessories
02
If you are missing any of the items listed above, please contact our customer service
immediately: support@nanoxia-world.com
Features:
- Watercooling ready
- Complete customizable soundproong with high quality materials meeng industrial standards
- 6 x 2.5 inch mounng frame
- Tool-free mounng of opcal drives
- 2 x USB 3.0, 2 x USB 2.0
- 10 Slots for expansion cards
- Max. VGA length: 338 mm (up to 468 mm with the HDD cages removed)
- Room for CPU coolers with a maximum height of up to 185 mm
- Mounng hole for CPU cooler in the motherboard tray
- Cable management with 9 rubberised holes in the motherboard tray
- Stepless 2-channel fan control for up to 6 fans
- Nanoxia VentCover (noise indulated): 2 x top cover
Noise Insulaon
The Nanoxia Deep Silence 5 Rev. B has been developed with the aim to oer the buyer a low-
noise case, while at the same me allowing for extremely low system temperatures. The sound
insulaon design is based on mulple interacng design elements:
The most important part is the large scale lining of the case with sound-absorbing insulaon
materials. These materials are manufactured specically to meet the requirements of the
developers of the Nanoxia Deep Silence case series and act equally against airborne sound and
structure-borne noise.
Included are special rubber seals which can be used to alternavely close the tube holes above
the rear chassis fan, in case you don’t need to use them.
03
EN
The removable Nanoxia VentCovers mask the 120/140 mm fan holes in the case top. They
allow the user to choose between the least possible noise and improved case venlaon.
Another design element for opmum sound insulaon is the use of two sound-insulated front
doors. The doors are equipped with sound-absorbing foam. Hard drives and power supply are
also decoupled mounted.
The whole concept of sound proong meets the highest expectaons.
Venlaon System
The Nanoxia Deep Silence 5 Rev. B has an integrated venlaon system consisng of three 140
mm Deep Silence fans and a built-in 2-channel fan controller. A total of up to six fans can be
mounted.
The Nanoxia VentCover under the top can be removed at any me and allow the installaon of
120 mm or 140 mm fans for opmized heat dissipaon.
The Deep Silence axial ow fans have been specically opmised for very quiet operaon. The
range of fan speeds and controls was designed to enable each user to adjust the case venlaon
to their own needs.
All air intake openings (front and boom) are readily accessible and have easy to clean dust
lters. Behind the lower front door two “Easy Access Panels” are located, allowing an easy
access to both the dust lter and the front 140 mm fans.
Standard Equipment:
Front: 2 x 140 mm Nanoxia Deep Silence fans (max. 1,100 rpm)
Rear: 1 x 140 mm Nanoxia Deep Silence fans (max. 1,100 rpm)
Oponal Equipment:
Top cover: 2 x 120/140 mm fans
Boom: 1 x 120/140 mm fan (removal of the HDD-holder necessary)
04
Watercooling-ready
The Nanoxia Deep Silence 5 Rev. B has been prepared for the installaon of a water cooling
system.
Therefore you can install radiators or a compact water cooling soluon under the top cover as
well as behind the front panel.
Top cover: 120/140/240/280 mm slim radiator
Before installing a water cooling system under the cover, please ensure if there is sucient
distance to the motherboard components. We recommend mounng the radiator behind the
front of the case.
Front: 120/240 mm radiator
Behind the front panel, a 120 or 240 mm radiator can be mounted. Please note that the front
HDD-cages must be removed for this - the HDD cage on the secondary mounng rail can
usually remain in the case.
For compact water cooling soluons, you should check before the installaon if the original
factory hoses between the cooler and radiator are suciently long enough in order to mount
the radiator-fan-combinaon at the front of the case.
Rubber hose guides:
Four rubber hose guides are located in the rear, so that the appropriate water cooling compo-
nents can be operated or mounted externally.
On the next pages you can nd some useful ps and explanaons for the opmal use of your
new case and for the installaon of your hardware.
05
EN
II. Installaon Instrucons
1. Installaon of the motherboard
You can mount E-ATX, XL-ATX, ATX, M-ATX and Mini-ITX motherboards in the Deep Silence 5
Rev. B. In order to ensure an easy installaon of your motherboard, we suggest the following
procedure:
Please consult the following charts to nd your motherboard form factor. Aach the stand-os
according to your motherboard form factor.
E-ATX XL-ATX, ATX Micro-ATX Mini-ITX
Aach the included EPS extension cable on to your motherboard – do not connect it to the
power supply yet.
Next you should mount the CPU cooler - for very large CPU coolers, the aachment of the EPS
extension cable aer installaon can be dicult.
In the next step place the motherboard
gently inside the case and lead the EPS
extension cable through the opening
provided in the top le of the mainboard
tray. Fix the motherboard to the mother-
board tray.
Aer the installaon of the power supply,
you can connect the EPS extension cable to
the EPS-connector on the PSU at the back of
the motherboard-tray
06
2. Installaon of external drives
You can install up to four external drives. An adapter frame for mounng a 3.5 inch drive is
included.
2.1 Opcal drives
To install the opcal drives, please remove both side panels. The installaon of opcal
drives is tool-free.
Remove the 5.25 inch cover by pulling the
lateral lng lever cauously towards you
and take out the cover.
Then loosen the lock on both sides by drag-
ging the black slider backwards (1).
Then slide the drive into the desired posi-
on.
Lock the holder by pushing the slider back
to its original posion (2).
2.2 Ulizing the external 3.5 inch bay
If you for example desire to place a 3.5 inch card reader, you can use the internal adapter for
this purpose. Please remove at rst the 5.25 inch cover (see chapter 2.1).
Open the two quick release of the boom 5.25 inch bay and remove the adapter frame. Install
the card reader in the frame and then put both the frame and the card reader back into the
bay. Lock the quick-release. At the end you can put the included 3.5 inch adapter plate carefully
before the card reader.
3. Installaon opons of HDD’s
The Deep Silence 5 Rev. B allows you the decoupled mounng of 14 hard disk drives. A total
of 11 x 2.5/3.5 inch bays are available. Included is the newly developed 6 x 2.5 inch mounng
frame, which will take three 3.5 inch bays for installaon. By using the 5.25 inch to 3.5 adaptor,
you can mount a total of 15 hard disks drives in your case.
1
2
07
EN
3.1 Mounng of hard disk drives
Install the 2.5 or 3.5 inch hard drives in the illustrated mounng frames. In order to extract the
frame, squeeze the protruding brackets and pull the slide out gently.
To install a hard drive into a bracket insert the disk so that the connectors point to the back and
aach the hard drive using the screws provided
For the ng of 3.5 inch hard drives
please use the holes in Figure 3A
For the ng of 2.5 inch hard drives
please use the holes in Figure 3B
To lock the drive, push the bracket with the
drive back installed back into the slot unl the
bracket is re-engaged.
3.2 Conversion and removal of the HDD-cages
Your new case is equipped with three modular HDD-cages (2 x 3-bay, 1 x 5-bay). The cages can
be removed, swapped or reposioned.
Due to this unique variability, you can:
- Adjust the number of available HDD mounts
- Install extra-long graphic cards
- Opmize the air ow within the case
- Mount a water cooling system behind the front fans
To remove the upper HDD cage, rst remove the le
side as seen from the front as well as the two thumb
screws that secure the cage. Then you can carefully
pull it out.
Figure 3A Figure 3B
08
3.3 Ulizing the 6 x 2.5 inch mounng frame
Our newly developed 6 x 2.5 inch frame allows the space-saving mounng of up to six 2.5 inch
drives. For installaon, the mounng frame will need three 3.5 inch bays.
To mount the hard disks, please remove the mounng frame. Insert your 2.5 inch drives
If you want to remove the lower hard drive cage in order to install a water cooling radiator,
simply loosen the 8 screws holding the cage to the chassis.
First remove the front panel (see chapter 4).
Next loosen the four screws securing the HDD cage to the front panel.
Finally, remove the four screws at the boom of the case which allow the cage to be removed.
09
Table des matières
Autres manuels Nanoxia Enceinte
Nanoxia
Nanoxia Deep Silence 1 Revision B Manuel utilisateur
Nanoxia
Nanoxia CoolForce 1 Manuel utilisateur
Nanoxia
Nanoxia PROJECT S MINI Manuel utilisateur
Nanoxia
Nanoxia DEEP SILENCE 2 Manuel utilisateur
Nanoxia
Nanoxia Deep Silence 3 Manuel utilisateur
Nanoxia
Nanoxia Deep Silence 5 Manuel utilisateur
Nanoxia
Nanoxia CoolForce 2 Manuel utilisateur
Nanoxia
Nanoxia Deep Silence 5 Manuel utilisateur
Nanoxia
Nanoxia Deep Silence 6 Revision B Manuel utilisateur
