My Child Sienta Duo Manuel utilisateur
Sienta Duo
Tandem Pushchair
This product is tested to: BS EN 1888:2012
Front seat suitable from: 6 months up to 15kg
Rear seat suitable from: BIRTH up to 15kg
INSTRUCTIONS: Please read carefully and keep for future
reference. Your child’s safety may be affected if you do not
follow these instructions
V10
page 1
ATTENTION: This pushchair is designed to carry 1 child in the front seat and 1 child in the
rear seat. DO NOT carry more than 2 children in this pushchair.
WARNING! Never leave your child unattended.
WARNING! Ensure that all the locking devices are engaged before use.
WARNING! To avoid injury ensure that your child is kept away when folding and
unfolding this product.
WARNING! Do not let your child play with this product.
WARNING! The front seat unit is not suitable for children under 6 months.
WARNING! Always use the crotch strap in combination with the waist belt.
WARNING! Check that the pushchair body or seat unit attachment devices are
correctly engaged before use.
WARNING! This pushchair is not suitable for running or skating.
WARNING! Do not lift and carry the pushchair with a child in it.
WARNING! Do not use the pushchair on steep slopes, stairs, escalators, beaches, mud
etc.
WARNING! Use the D-rings provided for the attachment of a separate safety harness
approved to BS6684
WARNING! Ensure that children are clear of moving parts before making adjustments.
WARNING! Never leave raincovers, hoods and aprons on indoors and in hot weather.
WARNING! Do not use replacement parts or accessories other than those approved by
MyChild.
WARNING! Do not load the basket with a weight in excess of 2kg.
WARNING! Always apply the brakes when the pushchair is stationary, and when
placing and removing children.
WARNING! Taking children up or down stairs, escalators, steps, steep slopes and
muddy/rough terrain in a pushchair could be dangerous and should not be
attempted. Any resulting damage will not be covered under the warranty. Remove
your child from the pushchair and fold it up for easy carrying to negotiate such
hazards, or simply avoid them.
WARNING! If your pushchair is to be used by someone unfamiliar, e.g grandparents,
show them how it works before letting them use it.
WARNING! Hold onto your pushchair when close to moving vehicles and trains as the
draught from the vehicles may move the pushchair even with the brakes on.
Only use parts and accessories that are approved by the manufacturer or distributor.
Non-approved parts and accessories may be unsafe and must not be used and will
invalidate the warranty.
IMPORTANT - Read the instructions carefully before use and keep them for future
reference. Your child’s safety may be affected if you do not follow these instructions.
Safety instructions
Cautions
• Improper use or lack of knowledge regarding the instructions can result in
dangerous situations, personal injury or damage to the pushchair.
• Completely remove all plastic bags and packing materials before using this
product to prevent a possible chocking hazard.
• Use the pushchair at a normal walking speed only.
• Regular maintenance will increase the life cycle of the product.
page 2
Welcome
Thank you for purchasing the MyChild Sienta Duo Tandem Pushchair.
Please read the instructions and warnings carefully before use to ensure safe and
satisfactory operation of this product.
Your child’s safety is your responsibility. If you have a query with this product or require
replacement parts, please contact the MyChild Helpline on 0161 335 2508.
Layoutthepartsonasoftlevelsurfaceandcomparetothepart/fixingschecklist
below. Do not discard any packaging until you are sure that you have all the parts.
WARNING! Assembly by an adult. Keep away from children until fully assembled. Keep
children clear during assembly as pack contains small parts which may present a
choking hazard.
Your 3 year warranty
Whilst we make and test our products to the highest standards of durability there’s
always a small chance of a hiccup! Our promise is to repair, replace or refund a
MyChildproductthathasanidentifiedmanufacturingdefectfromthedateof
purchase for a full 3 years thereafter at no extra cost.
However, you must register within 28 days of the date of purchase to receive the full 3
years guarantee!
To receive your full guarantee you can register your product by:
visiting www.mychild.co.uk/warranty.html and complete the warranty form,
or by telephone on 0161 335 2508.
• This product requires regular maintenance: Inspect the locking devices, brakes,
harnessassembly,catches,seatadjustments,jointsandfittingstoensuretheyare
secure and in full working order. Brakes and wheels are subject to wear and should
be replaced if necessary by contacting customer service.
• Ifanypartofyourpushchairbecomesstiffordifficulttooperate,ensurethatdirt
is not the cause. Use spray lubricant (silicone based) between the components.
Avoid over-spraying as this may encourage the accumulation of dirt. Regular
lubrication of moving parts will extend the life of your pushchair and make opening
and folding easier.
• The seat unit, plastic and metal parts must be sponged clean with warm water and
mild detergent. Always allow to dry thoroughly before using or storing.
• Do not leave the pushchair in sunlight for prolonged periods as fabrics may fade.
• Never use abrasives, ammonia, bleach or spirit based cleaners.
• Always store your pushchair in a dry place. Allow fabric and raincover to dry
thoroughly before folding and storing.
Care and maintenance
page 3
Parts checklist
Contained in your carton are:
NoPart Qty
1 Chassis 1
2 Front hood 1
3 Rear hood 1
4 Harness pads* 4
5 Basket* 1
6 Rear wheel assembly 1
7 Front wheels 2
8 Locking pin 1
9 Locking ring 1
10 Seat liner 1
11 Raincover 1
*Thesearepre-fittedbutare
removable
1
3
5
9
10 11
6 7 8
4
2
page 4
1. Align the front wheel assembly with the
front axle, ensuring you have the spring
pin (A) on the rear of the axle aligned
with the small hole (B) on the rear of the
wheel assembly.
Push the front wheel assembly onto the
axle until you hear the spring pin ‘click’
into place.
NOTE: Check the wheel to make sure it is
secure by pulling it.
1. The swivel wheels can only be locked
when in the trailing position as shown.
To lock the wheel: position the wheel in
the trailing position and pull the swivel
lock up.
2. To allow the wheels to swivel: push
down on swivel lock (B).
WARNING: Always lock the swivel wheels when using the pushchair on rough surfaces.
Front wheel assembly
Using the swivel/lock function
B
A
click
B
A
page 5
1. Line up the rear wheel assembly with
the back legs of the pushchair, so that
the frame ‘LOCK’ (A) and the ‘BRAKE’
pedal (B) will be able to connect.
2. Push the wheel assembly onto the
back leg until the spring pins (C) click into
place.
3. Place the ‘BRAKE‘ pedal (D) into the slot on the frame ‘LOCK‘ (E).
4. Insert the locking pin (F) into the hole on the side of the frame ‘LOCK’ and push it all
the way through to connect the ‘BRAKE‘ pedal to the frame ‘LOCK’.
5. Thread the locking ring (G) through the hole on the end of the locking pin.
Rear wheel assembly
A
B
C
F
E
D
G
click
page 6
1. Hold the pushchair by the handles and
release storage strap (A). Whilst holding
the handles, allow the front legs to drop
towardstheoor.
3. Check that both the upper side hinges
(C) and frame ‘LOCK’ pedal (D) are fully
engaged.
2. DO NOT try and open the pushchair by
forcing the handles apart. Place your foot
on the frame ‘LOCK’ pedal (B) and push
down until the frame is fully open and
locked.
Opening the pushchair
B
C
D
A
page 7
1. Place the toe of your shoe under the
bottom bar directly under the ‘BRAKE’
pedal and lift the bar up to release the
frame lock.
IMPORTANT: Lift the bar directly upwards
and not at an angle.
3. Gently push forwards until the
pushchair is folded.
4. Connect the storage strap (B).
2. Pull back both catches (A) on the
handles.
WARNING! Fold the rear hood back and the front hood forward before attempting to
fold the pushchair. Failure to do so may damage the hoods.
Folding the pushchair
A
A
B
page 8
Carrying the pushchair
Adjusting the rear backrest
B
A
1. Once you have attached the storage strap (A), carry the pushchair using the
integral carry handle (B) located on the side of the chassis.
1. To recline: Whilst pressing the button, on
the slider, downwards, pull the backrest
down into the required position
2. To raise: Push the slider up whilst holding
the strap.
A
Table des matières
Autres manuels My Child Poussette
