MuxLab 500733 Manuel utilisateur

P/N: 94-000835-A SE-000835-A

6G-SDI Extender Over UTP with Ethernet

500733

Installation & Operation Manual

Page 2

6G-SDI Extender Over UTP with Ethernet

Page 3

Printed in Canada. No part of this publication may be reproduced,

stored in a retrieval system, or transmitted in any form or by any

means, electronic, mechanical, photocopying, recording or

otherwise without prior written permission of the author.

Trademarks:

MuxLab Broadcast is a registered trademark of MuxLab Inc.

6G-SDI Extender Over UTP with Ethernet

Page 4

Table of Contents

1. Overview.........................................................................5

1.1. Description..............................................................5

1.2. Features...................................................................8

2. Technical Specifications ..............................................10

3. Installation Procedure.................................................12

3.1. Parts List ...............................................................12

3.2. Product Overview .................................................13

3.3. Physical Installation..............................................15

3.4. Installation & Power-up Procedure.......................16

3.5. Supported SDI Modes...........................................17

3.6. Supported Video Modes........................................18

3.7. SDI Input Connection ...........................................19

3.8. SDI Output Connection.........................................19

3.9. Ethernet Connection..............................................20

4. Firmware Upgrade Procedure....................................21

4.1. Firmware Upgrade Procedure ...............................21

4.2. USB Driver Setup .................................................24

5. Unit Control and Status...............................................27

6. Troubleshooting ...........................................................28

7. Appendix.......................................................................30

A. ASCII Command Set.............................................30

8. Product Warranty Policy............................................33

6G-SDI Extender Over UTP with Ethernet

Page 5

Overview

1.1.

Description

The 6G-SDI Extender over UTP with Ethernet is a unique new

solution from MuxLab for extending SDI cameras or other SDI

sources up to 4K resolution with the added benefit of extending the

signal up to 330ft (100m) using Cat5e/6 cable. This multichannel

extender supports up to 6Gbps of data transfer over the UTP link,

and allows for versatile combinations of sources, including one

6G-SDI source, two 3G-SDI sources or four HD-SDI sources.

In addition Ethernet may be transmitted over the same UTP data

link between Transmitter and Receiver. This Ethernet path may be

used as a video Return Channel for AV monitoring and talk-back

with the use of devices such as the MuxLab 3G-SDI / RS232 over

IP Extender (model 500756) to transmit a 3G-SDI video return

signal (typically a resulting edited video) from the sink back

toward the source. Two Ethernet ports are available on both the

Transmitter and Receiver. The devices also support bi-directional

RS232 pass-through between Transmitter and Receiver for control

of end devices, and can also be used to return tally light and

camera control unit (CCU) signals.

Standard Cat5e/6 UTP cable is used for the extension. The 6G-SDI

Extender with Ethernet supports PoE, whereby the Transmitter

may be powered by the Receiver via the UTP link. The Ethernet

Port A provides PoE (PSE) to a connected device supporting PoE

(PD), such as the above mentioned 3G-SDI / RS232 over IP

Extender (model 500756). See an example of this on the following

diagram.

6G-SDI Extender Over UTP with Ethernet

Page 6

Figure 1: System Overview

6G-SDI Extender Over UTP with Ethernet

Page 7

Applications:

• Cinema recording

• Movie making

• Studio video production

• News media coverage / live reporting

6G-SDI Extender Over UTP with Ethernet

Page 8

1.2.

Features

Extend up to 4K @ 30Hz resolution to 330ft

(100m) over Cat5e/6.

Supports multichannel transmission of one 6G-SDI

source, two 3G-SDI sources, or four HD-SDI

sources.

Supports the transmission of two Ethernet ports.

Port A supports 100Mbps and Port B 10Mbps.

Supports bi-directional RS232 pass-through for

remote control of end devices, and as a return for

tally light and camera control unit (CCU) signals.

Maximum resolution supported: 4096x2160 @

24/25Hz, 3840x2160 @ 30Hz.

Supported SMPTE Standards:

SMPTE-292M, SMPTE-296M, SMPTE-372M,

SMPTE-424M, SMPTE-425M

Supports all 6G channel configurations (1, 2, or 4

BNC).

Automatic SDI Link recognition and configuration.

Automatic activation of long reach mode 500ft

(150m) when a 3G signal is detected.

USB interface for field upgradable firmware and

diagnostics.

The Receiver supplies PoE (PSE) to power the

Transmitter.

6G-SDI Extender Over UTP with Ethernet

Page 9

Ethernet Port A of both the Transmitter and

Receiver is capable of supplying PoE (PSE) power

to a connected MuxLab Over IP PoE (PD) device.

Ethercon connectivity and solid Aluminum

enclosure for ruggedized use.

Multiple ¼”-20 threads for Camera mounting or

equipment attachment.

6G-SDI Extender Over UTP with Ethernet

Page 10

Technical Specifications

Specifications

Environment

6G-SDI Digital Signal Transmission

Enclosure

Aluminum casing :

Tx & RX: 110mm (4.3”) x 110mm (4.3”) x 32mm (1.250”)

Color

Tx & RX: Black

Control

Serial Console Emulation with USB Interface

Compliance

FCC, CE, RoHS

Power

48VDC, 0.7Amp

External Power Supply with US, UK and Euro blades

Table 1 - Specifications

6G-SDI Extender Over UTP with Ethernet

Table des matières

Autres manuels MuxLab Extenseur

MuxLab

MuxLab 500772 Manuel utilisateur

MuxLab

MuxLab 500753 Manuel utilisateur

MuxLab

MuxLab 500451 Manuel utilisateur

MuxLab

MuxLab 500730 Manuel utilisateur

MuxLab

MuxLab 500754 Manuel utilisateur

MuxLab

MuxLab 500409 Manuel utilisateur

MuxLab

MuxLab 500754 Manuel utilisateur

MuxLab

MuxLab 500757 Manuel utilisateur

MuxLab

MuxLab Broadcast 500734 Manuel utilisateur

MuxLab

MuxLab 500753 Manuel utilisateur

MuxLab

MuxLab Pro Digital 500452 Manuel utilisateur

MuxLab

MuxLab 500456 Manuel utilisateur

MuxLab

MuxLab VideoEase MonoPro XLR Guide de l'utilisateur

MuxLab

MuxLab 500451-POE Manuel utilisateur

MuxLab

MuxLab 500752 Manuel utilisateur

MuxLab

MuxLab 500758 Manuel utilisateur

MuxLab

MuxLab 500754 Manuel utilisateur

MuxLab

MuxLab 500451 Manuel utilisateur

MuxLab

MuxLab 500040 Manuel utilisateur

MuxLab

MuxLab 500459-100 Manuel utilisateur

MuxLab

MuxLab 500464-V2 Manuel utilisateur

MuxLab

MuxLab 500401-WP-UK Manuel utilisateur

MuxLab

MuxLab 500752 Manuel utilisateur

MuxLab

MuxLab 500752 Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur

SECO-LARM

SECO-LARM ENFORCER EVT-PB1-V1TGQ Manuel utilisateur