Murrelektronik CUBE20S Manuel utilisateur

Manual CUBE20S PROFINET IO

Art.-No. 57106 Bus node incl. power module

Murrelektronik GmbH

Falkenstraße 3

71570 Oppenweiler

GERMANY

Phone +49 7191 47-0

Fax +49 7191 47-491000

[email protected]

NOTE

Translation of the original instructions

This document is valid for the following products:

Document status:

Material short text Art.-No.

Cube20S PROFINET IO Busknoten 57106

Manual number 57106

Language EN

Version 13

Date 2020-03

Manual CUBE20S PROFINET IO

Art.-No. 57106 Bus node incl. power module

3 / 94

Table of Contents

1 Introduction 6

1.1 Service and support 6

1.2 Introduction / about this document 7

1.3 Symbols 7

1.4 Trademarks 8

2 For your own safety 9

2.1 Target group 9

2.2 Intended purpose 9

2.3 General safety instructions 9

2.4 Notes on electrostatically sensitive equipment 10

2.5 EMC installation guidelines 11

2.6 Notes on spare parts and accessories 11

2.7 Environmentally friendly disposal 12

2.8 EC Declaration of Conformity 12

2.9 Warranty and liability 12

3 System description 13

3.1 Hardware revision 17

4 General data 18

5 Technical Data 20

6 Mounting 22

6.1 Dimensions 22

6.2 General notes 23

6.2.1 Functional principle of the locking 24

6.3 Installing the DIN rail 25

6.4 Mounting of the bus node 26

6.5 Installing the expansion modules 27

6.6 Replacing an electronic module 28

6.7 Installing the bus cover 29

6.8 Installing the shield bus carrier 30

7 Disassembling and replacing modules 31

7.1 Procedure 31

7.2 Replacing the bus node 32

7.3 Replacing an expansion module 33

7.4 Replacing an electronic module 35

7.5 Replacing a module group 36

8 Installation 38

8.1 General notes 38

Manual CUBE20S PROFINET IO

Art.-No. 57106 Bus node incl. power module

4 / 94

8.2 Spring terminals 38

8.2.1 Procedure 40

8.3 Wiring of the bus node 41

8.4 Wiring of the expansion modules 42

8.5 Wiring of the power modules 42

8.6 Fixing the shield 44

8.7 Fuse protection 45

8.7.1 Power modules 45

8.7.2 System 45

8.7.3 Fuse-protection with MICO circuit breakers 46

8.8 Using power modules 47

8.8.1 Power module art. no. 57130 47

8.8.2 Power module art. no. 57131 47

9 Troubleshooting 49

10 Art.-No. 57106 PROFINET IO bus node 50

10.1 Features 50

10.2 Structure 51

10.3 Interfaces 51

10.3.1 Address switch 52

10.4 LED status indication 54

11 PROFINET IO 57

11.1 Basics 57

11.2 PROFINET installation guidelines 60

11.3 System access 62

11.3.1 Overview 62

11.3.2 Access to the I/O range 63

11.3.3 Access to parameter data 63

11.3.4 Access to diagnostic data 64

11.4 Planning 65

11.5 Web server 71

11.5.1 Access via IP address 71

11.5.2 Structure of the web server 71

11.5.3 Web page with selected PROFINET IO device 71

11.5.4 Website if a module is selected 72

11.6 FMM - Free Module Mapping 73

11.6.1 Overview 73

11.6.2 Configuration 73

11.6.3 Data record 0x7F 74

11.6.4 Start-up 74

11.6.5 Configuration examples 75

11.6.5.1 Nominal configuration 75

11.6.5.2 Hardware variants 75

11.7 Diagnosis and interrupt 79

11.7.1 Process interrupt 79

Manual CUBE20S PROFINET IO

Art.-No. 57106 Bus node incl. power module

5 / 94

11.7.2 Diagnostic interrupt 80

11.8 Access to diagnostic data 83

11.8.1 Acyclic Access 83

11.8.2 Diagnostic data of PROFINET IO device 83

11.8.3 Diagnostic data modules 84

11.9 I&M data 86

11.10 Index overview 88

12 Appendix 90

12.1 Accessories 90

12.2 Glossary 91

12.3 Legal notes 92

Introduction

User manual 57106_hdb_en_13 6 / 94

1 Introduction

1.1 Service and support

Service and support

Sales Our sales staff in-house and in the field, and our technicians will support you

at all times.

Sales support Our sales support will assist you:

with consultation during the development phase of your application,

with extensive system design across all product groups,

with visits from traveling sales representatives,

with a system analysis.

For any further questions, please do not hesitate to contact our sales repre-

sentatives!

Application support Our application support will assist you:

with product-related questions during commissioning,

with product-related and customer-specific software components support-

ing your application, such as diagnostics.

For any further questions, please do not hesitate to contact our sales repre-

sentatives!

Customer Service Cen-

ter (CSC)

Our staff of the Customer Service Center will help you with all questions con-

cerning installation and start-up. They support you, for example, if you have

problems with combining hardware and software products from different man-

ufacturers.

A number of support tools and measurement facilities are available for field

bus systems and EMC interference.

Call us on +49 7191 47-2050 or send us an

e-mail to: support@murrelektronik.com

Service addresses Murrelektronik GmbH has a policy of customer proximity, both at the national

and international level. Please visit our website to find your contact person:

www.murrelektronik.com

Introduction

User manual 57106_hdb_en_13 7 / 94

1.2 Introduction / about this document

Purpose of this

document

This document describes the use of the

Cube20S PROFINET IO bus node

module from the CUBE20S system by Murrelektronik GmbH. It describes the

design, engineering and application.

NOTE

Translation of the original manual.

1.3 Symbols

This document includes information and notes that have to be observed for

your own safety and to avoid injuries and material damage. They are marked

as follows:

DANGER!

Immediate danger

Failure to observe this warning involves an imminent risk of death or seri-

ous injuries.

WARNING!

Possible danger

Failure to observe this warning can lead to death or serious injuries.

CAUTION!

Low-risk danger

Failure to observe this warning can lead to mild to moderate injuries.

NOTICE

Possible material damage

Failure to observe the warning may cause damage to the device and/or

the system.

NOTE

Other technical information and notes of Murrelektronik GmbH.

RECOMMENDATION

Notes with this symbol are recommendations of Murrelektronik GmbH.

PRODUCTS AND ACCESSORIES

This symbol indicates accessories or product recommendations.

Instruction for use An arrow marks instructions.

Read and observe the instructions.

Introduction

User manual 57106_hdb_en_13 8 / 94

1 | If they are numbered, it is absolutely necessary to follow them in the cor-

rect order.

2 | Read and observe the instructions.

Hexadecimal numbers Hexadecimal numbers are written in the 0x format usually used by program-

mers, e.g. : 0x15AE = 15AEh

1.4 Trademarks

Trademarks of the following companies and institutions are used in this docu-

mentation:

PROFINET/PROFINET IO PROFIBUS Nutzerorganisation e.V. (PNO)

PRONETA Siemens AG

S7-300 Siemens AG

S7-400 Siemens AG

S7-1500 Siemens AG

SIMATIC Siemens AG

STEP Siemens AG

TIA Portal Siemens AG

For your own safety

User manual 57106_hdb_en_13 9 / 94

2 For your own safety

2.1 Target group

Users This manual is intended for users who have knowledge of automation sys-

tems.

Documentation Please give this manual to all employees involved in the following tasks:

Planning

Installation

Set-up

Operation

2.2 Intended purpose

Designated use The Cube20S system has been designed and manufactured for:

communication and process control

general control and automation tasks

industrial use

operation under the ambient conditions specified under technical data

installation in a switch cabinet

Foreseeable misuse The device is not approved for being used:

in potentially explosive atmospheres (EX Zone)

outside of switch cabinets.

2.3 General safety instructions

Please note:

the relevant safety and accident prevention regulations;

the EC Directives or other national regulations;

generally recognized safety rules;

the section 2.5 "EMC installation guidelines".

NOTICE

Defective device!

Improper use of hardware and software can cause damage to the device.

Only qualified personnel of Murrelektronik GmbH may manipulate the de-

vice.

Use the device only to the extent described in the manual.

Avoid accidents caused by electrical voltage!

Comply with the 5 safety rules of electrical engineering!

Disconnect the device from the mains.

Then carry out installation or repair work.

Avoid personal injury and material damage due to malfunctions!

Provide external circuit breakers.

The device may only be operated within the specified tolerances.

For your own safety

User manual 57106_hdb_en_13 10 / 94

Avoid undefined states!

Select and install connection lines so that capacitive and inductive inter-

ferences do not have adverse effects on the system.

Protect the device against improper and unintended use.

2.4 Notes on electrostatically sensitive equipment

NOTICE

Electrostatic sensitive product

The assemblies might get damaged.

Ensure sufficient grounding of persons and working material!

Handling

Murrelektronik assemblies include highly integrated MOS com-

ponents. These components are extremely sensitive to over-

voltage occurring, for example, due to electrostatic discharge.

Assemblies at risk are marked with the adjacent symbol.

The symbol is affixed to assemblies, sub-racks or packaging

and indicates electrostatically sensitive equipment. These as-

semblies may become irreparably damaged by voltage and energy levels

which are far below the perception levels of human beings.

If a person who is not electrostatically discharged handles electrostatically

sensitive equipment, voltages may be produced. They may damage compo-

nents, impair the functioning of assemblies or render assemblies inoperative.

Frequently, assemblies thus damaged cannot directly be recognized as faulty.

The fault may only show up after prolonged operation.

Components damaged by electrostatic discharge may produce temporary

faults in case of temperature changes, vibrations or load changes.

Only with a consistent use of protective devices and a responsible compliance

of the instructions for use can you avoid malfunctions or failures of the elec-

trostatically sensitive equipment.

Shipping For shipping electrostatically sensitive equipment, use always the original

packaging.

Measurements Observe the following notes for measurements on electrostatically sensitive

equipment:

Discharge potential-free measuring instrument briefly

Ground the measuring instruments used

Autres manuels pour CUBE20S

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Murrelektronik Unité de contrôle

Murrelektronik

Murrelektronik Cube67 Series Manuel utilisateur

Murrelektronik

Murrelektronik MVK-MP Manuel utilisateur

Murrelektronik

Murrelektronik Data Panel xtreme DB DP-34044-1 Manuel utilisateur

Murrelektronik

Murrelektronik IMPACT67-P Manuel utilisateur

Murrelektronik

Murrelektronik MVK-MPNIO Series Manuel utilisateur

Murrelektronik

Murrelektronik IMPACT67 Series Manuel utilisateur

Murrelektronik

Murrelektronik Data Panel xtreme DB DP-34044-2 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur