MUFU V20S Manuel utilisateur
V20S
Moto Cam
User Manual
1
Thank you for purchase MUFU moto cam. This product is specifically
designed to record real time video when riding a scooter or motorcycle.
The content in this document is for informational purpose only and is
subject to change without prior notice. We have made every effort to
ensure that this User Manual is accurate and complete, however, no
liability is assumed for any errors or omissions.
The manufacturer reserves the right to change the technical
specifications or accessories without prior notice.
Please visit official website for the latest version of user manual.
Notice
1. Please peel off the protective film from the camera lens before use.
2. Do not touch the lens with your fingers. Finger grease may be left
on the lens, resulting in unclear videos or pictures. Inspect and
clean the lens with a soft, non-abrasive cloth regularly.
3. Please charge the unit to full before first use using the provided
USB Type-C cable. Please do not use another brand of charging
cable to avoid a potential equipment malfunction. The red LED on
the camera will illuminate when charging, and will turn off upon
reaching full charge.
*Charging adapter can use 5V, 1A and higher, USB Type-A port.
4. If the unit will not be used for an extended period of time, please
charge at least once every 6 months to maintain the battery's
health and avoid low-voltage related damage.
5. Please download MUFU Video app from iOS app store or Google
Play Store before use. The Wi-Fi password is 12345678.
6. By default, Wi-Fi is ON for 3 minutes when the camera is powered
on. If it doesn’t connect to the MUFU Video app within 3 minutes,
the camera will disable Wi-Fi automatically to save power. To turn
on again Wi-Fi, simply power the camera OFF then ON again.
NOTE: An active Wi-Fi connection will affect total recording
time.
7. Recommend to use microSD card V30 or higher and capacity
16GB or higher (up to 128GB).
2
8. Format microSD card regularly and synchronize date/time.
(Recommended: Once per month.)
9. In a high humidity environment or when travelling between
areas with a large temperature difference, light moisture or fog
may appear on the lens. This is normal. If this happens,
remove the microSD card, and remain the microSD card slot
cover and USB port cover opening, let the microSD card slot
and USB port face up for several hours until the internal
moisture or fog evaporates, and then reinsert the card and
resume use.
10. The friction scratches caused by the regular buckle of the main unit
mount are normal and do not affect the use. Due to the production
test, the main unit mount will have some micro-friction scratches.
This is normal.
Prohibition of co-location
This device and its antenna(s) must not be co-located or operated in
conjunction with any other antenna or transmitter.
WEEE Notice
Disposal of Waste Electrical and Electronic Equipment and/or
Battery by users in private households in the European
Union
This symbol on the product or on the packaging indicates
that this cannot be disposed of as a household waste. You
must dispose of your waste equipment and/or battery by
handling it over to the applicable take-back scheme for the
recycling of electrical and electronic equipment and/or
battery. For more information about recycling of this
equipment and/or battery, please contact your city office,
the shop where you purchased
3
the equipment or your household waste disposal service. The recycling
of materials will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and environment.
CE Regulatory Notice
The product herewith complies with the requirements of the EMC and
RED Directive 2014/53/EU and the RoHS Directive 2011/65/EU.
EU Health Protection: This equipment should be installed and
operated with minimum distance 20cm between the radiator & your
body.
Regulatory & Safety Notice
❖This document provides country- and region-specific
non-wireless and wireless regulatory notices and compliance
information for your product. Some of these notices may not
apply to your product.
❖Disposal of a battery into fire or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.
❖Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of
flammable liquid or gas.
❖Due to local laws and for your own safety, DO NOT operate the
camera while riding.
❖Use MUFU Video to app to synchronize your date and time
before first use.
❖The firmware function in the camera is for reference only, riders
are advised to exercise discretion based on actual road
conditions.
❖This product is intended only for non-commercial use, within the
maximum limits permitted by law. We take no responsibility for
any losses as a result of use of this product.
❖Wi-Fi Signals are unable to pass through the building. The max
limit of signal transmission is 5 meter.
4
❖Wi-Fi Operation Channel: Ch1~Ch11
❖The product employs wireless data communication which may
interfere, or be interfered by, a near-by camera.
❖Never use this camera in the vicinity of a microwave oven or at
places where there is radio interference.
❖Radio wave reception may be worsened in specific
environments.
❖Please be advised that if another camera is also using the same
2.4GHz band as this product, the processing speed of both
cameras may slow down.
❖The camera may get warm during use. This is normal.
❖Improper use or operation of the product may result in damage to
the camera or its accessories and void the warranty.
❖This device and its antenna(s) must not be co-located or
operated in conjunction with any other antenna or transmitter.
❖The radio frequency (RF) generated by this RF electronic
camcorder may cause adverse effects on the operation of other
electronic camcorders and result in malfunctioning. Wireless
transmitters and circuitry may also interfere with other electronic
camcorders. Therefore, do observe the following precautions:
•Aircraft: Never use a radio transmitter when you are in an
airplane. Please switch off the Wi-Fi function of the
camcorder.
•Vehicle: The radio frequency transmitted by this camcorder
may affect the electronic system in a motorized vehicle.
Please consult the manufacturer or dealer of your vehicle
on the possible effect.
•Pacemaker: In order to prevent any potential interference
to a pacemaker, anyone who uses a pacemaker should be
advised, that, when using this camcorder, a minimum
distance of 15cm (6 inch) should be kept between the
camcorder and the pacemaker; and never put this
camcorder in a chest pocket. In case of any doubt of
interference, switch off the camcorder immediately.
5
•Medical Camcorder: If you use a personal medical
camcorder, consult the camcorder manufacturer or your
physician to confirm if your camcorder is sufficiently
shielded from the RF transmission of this camcorder.
•Medical Facilities: Hospitals and medical institutes may use
facilities that are sensitive to an external RF energy.
Observe such instructions when the medical care
personnel or any posted sign requests you to switch off any
camcorder that may interfere the radio frequency.
•Explosion sites or any location with a posted sign: In order
to prevent interfering with an explosion activity, observe all
the signage and instructions in the Explosion Area or in a
zone with a “Switch Off 2-way Radios” sign by switching off
camcorders that may interfere with the radio frequency.
❖MUFU is NOT responsible for the loss of any data/content during
operation.
By using the product, it is assumed that you agree to
all of the above statements.
6
Step 1: Check What’s Inside
The package contains the following items. If any items are
missing or damaged, please contact the original place of
purchase immediately.
Camera
(Main Unit)
Main Unit
Mount
USB Cable
(type C)
Noise
Absorbent
Sponge
User Manual
Warranty
7
Step 2: Product Overview
No
Description
No
Description
1
microSD slot
6
Microphone
2
USB port (type C)
7
Rear camera
3
LED Indicator
8
Power On/Off Sensor
4
Reset
9
Bracket
5
Front camera
8
Step 3: Insert microSD Card
Insert the microSD memory card with the pins facing forward.
(See below for proper installation orientation.) Once the
memory card locks into place, replace the slot cover securely
over the slot.
9
The slot cover must be tightly sealed to prevent moisture from
entering, causing the lens to fog. Insert the left edge of the
slot cover, and then press the right edge of the slot cover to
create a good seal. See below.
Table des matières
Autres manuels MUFU Appareil photo numérique
