MSI MS-6507 Manuel utilisateur
i
Version 1.0
G52-MA00416
MS-6507 (v1.X) Micro ATX Mainboard
MSI
MICRO-STAR INTERNATIONAL
ii
Micro-Star International MS-6507
Tested to comply
with FCC Standard
For Home or Office Use
Manual Rev: 1.0
Release Date: Nov. 2001
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a class
B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will be required to correct
the interference at his own expense.
Notice 1
The changes or modifications not expressly approved by the party respon-
sible for compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and A.C. power cord, if any, must be used in order to
comply with the emission limits.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU
RESEAU.
iii
Edition
Nov. 2001
Copyright Notice
The material in this document is the intellectual property of MICRO-STAR
INTERNATIONAL. We take every care in the preparation of this document,
but no guarantee is given as to the correctness of its contents. Our products
are under continual improvement and we reserve the right to make changes
without notice.
Trademarks
All trademarks used in this manual are the property of their respective owners.
Intel and Pentium are registered trademarks of Intel Corporation.
PS/2 and OS/2 are registered trademarks of IBM Corporation.
Windows 95/98/2000 and Windows NT are registered trademarks of Microsoft.
Netware is a registered trademark of Novell.
Award is a registered trademark of Award Software Inc.
Revision History
Revision Revision History Date
V1.0 First release Nov. 2001
iv
1. Always read the safety instructions carefully.
2. Keep this User’s Manual for future reference.
3. Keep this equipment away from humidity.
4. Lay this equipment on a reliable flat surface before setting it up.
5. The openings on the enclosure are for air convection hence protects the
equipment from overheating. DO NOT COVER THE OPENINGS.
6. Make sure the voltage of the power source and adjust properly 110/220V
before connecting the equipment to the power inlet.
7. Place the power cord such a way that people can not step on it. Do not
place anything over the power cord.
8. Always Unplug the Power Cord before inserting any add-on card or module.
9. All cautions and warnings on the equipment should be noted.
10. Never pour any liquid into the opening that could damage or cause electri-
cal shock.
11. If any of the following situations arises, get the equipment checked by a
service personnel:
zThe power cord or plug is damaged
zLiquid has penetrated into the equipment
zThe equipment has been exposed to moisture
zThe equipment has not work well or you can not get it work according
to User’s Manual.
zThe equipment has dropped and damaged
zIf the equipment has obvious sign of breakage
12. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
UNCONDITIONED,STORAGETEMPERATUREABOVE600
C(1400F),IT
MAY DAMAGE THE EQUIPMENT.
Safety Instructions
CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the
manufacturer.
v
CONTENTS
Chapter 1. Getting Started ........................................................................ 1-1
Mainboard Specification ...................................................................... 1-2
Mainboard Layout ............................................................................... 1-4
Quick Components Guide .................................................................... 1-5
Key Features ........................................................................................ 1-6
MSI Special Features ........................................................................... 1-7
PC Alert™ III ................................................................................. 1-7
Chapter 2. Hardware Setup ....................................................................... 2-1
Central Processing Unit: CPU .............................................................. 2-2
CPU Installation Procedures ......................................................... 2-2
Installing the CPU Fan .................................................................. 2-3
CPU Core Speed Derivation Procedure ......................................... 2-4
Memory ................................................................................................ 2-5
Introduction to DDR SDRAM ....................................................... 2-5
DDR Module Combination ............................................................ 2-6
Installing DDR Modules ............................................................... 2-6
Power Supply ....................................................................................... 2-7
ATX 20-Pin Power Connector ....................................................... 2-7
ATX 12V Power Connector: JPW1 ................................................ 2-7
Back Panel ............................................................................................ 2-8
Mouse Connector ......................................................................... 2-8
Keyboard Connector ..................................................................... 2-9
USB Connectors ............................................................................ 2-9
Serial Port Connector: COM A & COM B ................................... 2-10
Joystick/Midi Connectors ........................................................... 2-10
Audio Port Connectors ............................................................... 2-10
Parallel Port Connector ................................................................ 2-11
LAN Jack (RJ-45) ......................................................................... 2-12
vi
Connectors ......................................................................................... 2-13
Chassis Intrusion Switch Connector: J5 ...................................... 2-13
Floppy Disk Drive Connector: FDD1 ........................................... 2-13
Hard Disk Connectors: IDE1 & IDE2 ........................................... 2-14
CD-In Connector: CD_IN1 .......................................................... 2-15
Aux Line-In Connector: AUX_IN1 .............................................. 2-15
Modem-In Connector: MDM_IN1 .............................................. 2-15
Fan Power Connectors: C_FAN1/S_FAN1 .................................. 2-16
Wake On Ring Connector: JMDM1 ............................................. 2-17
Wake On LAN Connector: JWOL1 .............................................. 2-17
Power Saving Switch Connector: JGS1 ........................................ 2-18
IrDA Infrared Module Header: IR2 .............................................. 2-18
Power Saving LED Connector: JGL1 ........................................... 2-19
Front Panel Audio Connector: JAUDIO1 .................................... 2-20
Front Panel Connector: F_P2 ....................................................... 2-22
Front USB Connector: USB1 or USB3 ......................................... 2-23
Jumpers .............................................................................................. 2-24
Clear CMOS Jumper: JBAT1 ........................................................ 2-24
Onboard LAN Jumper: JLAN1 .................................................... 2-25
Onboard Audio Codec Jumper: JP2 ............................................. 2-25
Slots ................................................................................................... 2-26
AGP (Accelerated Graphics Port) Slot ......................................... 2-26
PCI Slots ...................................................................................... 2-26
CNR (Communication Network Riser) ......................................... 2-26
PCI Interrupt Request Routing .................................................... 2-27
Chapter 3. AMI® BIOS Setup .................................................................. 3-1
Entering Setup ...................................................................................... 3-2
Selecting the First Boot Device ..................................................... 3-2
Control Keys ................................................................................. 3-3
vii
Getting Help .................................................................................. 3-3
The Main Menu ................................................................................... 3-4
Standard CMOS Features .................................................................... 3-6
Advanced BIOS Features .................................................................... 3-8
Advanced Chipset Features ............................................................... 3-12
Power Management Setup ................................................................. 3-14
PNP/PCI Configurations ..................................................................... 3-17
Integrated Peripherals ........................................................................ 3-19
Hardware Monitor Setup .................................................................... 3-22
Load Fail-Safe/Optimized Defaults ..................................................... 3-24
Supervisor/User Password ................................................................. 3-25
IDE HDD AUTO Detection ................................................................ 3-26
Chapter 4. AWARD® BIOS Setup ............................................................ 4-1
Entering Setup ...................................................................................... 4-2
Control Keys ................................................................................. 4-2
Getting Help .................................................................................. 4-3
The Main Menu ................................................................................... 4-4
Standard CMOS Features .................................................................... 4-6
Advanced BIOS Features .................................................................... 4-8
Advanced Chipset Features ............................................................... 4-12
Integrated Peripherals ........................................................................ 4-14
Power Management Setup ................................................................. 4-18
PNP/PCI Configurations ..................................................................... 4-22
PC Health Status ................................................................................ 4-24
Frequency/Voltage Control ................................................................ 4-25
Load Fail-Safe/Optimized Defaults ..................................................... 4-26
Set Supervisor/User Password ........................................................... 4-27
Glossary .................................................................................................... G-1
Getting Started
1-1
Chapter 1. Getting Started 1
Getting Started
Thank you for purchasing the MS-6507 v1.X Micro ATX mainboard. The
MS-6507 is based on Intel®82845 & 82801BA chipsets for optimal system
efficiency. Designed to fit the advanced Intel®Pentium®4 processors in the
478 pin package, the MS-6507 delivers a high performance and professional
desktop platform solution.
TOPICS
Mainboard Specification 1-2
Mainboard Layout 1-4
Quick Components Guide 1-5
Key Features 1-6
MSI Special Features 1-7
Chapter 1
1-2
CPU
Supports Intel®Pentium®4 processor in 478 pin package.
Supports 1.5GHz, 1.6GHz, 1.7GHz, 1.8GHz, 1.9GH z, 2GHz and up.
Chipset
Intel®845 chipset (593 FC-BGA)
- Supports DDR SDRAM at 200/266MHz operation (DDR200/DDR266).
- AGTL+ host bus with integrated termination supporting 32-bit host
addressing.
- 1.5V AGP interface with 4x data transfer and 4x fast write capability.
- 8-bit, 66MHz 4x hub interface to the Intel ICH2.
Intel®ICH2 chipset (360 EBGA)
- Upstream hub interface for access to the Intel MCH.
- 2-channel Ultra ATA/100 Bus Master IDE controller.
- USB controller 1.1 (expanded capabilities for 4 ports).
- I/O APIC.
- SMBus controller.
- FWH interface.
- LPC interface.
- AC’97 2.1 interface.
- PCI 2.2 interface.
- Integrated system management controller.
MainMemory
Supports four memory banks using two 184-pin DDR DIMM.
Supports up to 2GB PC2100/PC1600 DDR SDRAMs.
Supports 2.5v DDR SDRAM.
Slots
One AGP (Accelerated Graphics Port) 4x slot (1.5V only).
Three PCI 2.2 32-bit Master PCI bus slots (support 3.3V/5V PCI bus interface).
One CNR (Communication Network Riser) slot.
Mainboard Specification
Note: The AGP slot DOES NOT support 3.3V AGP card. Use of
3.3V AGP card may cause damage to the mainboard.
Getting Started
1-3
On-BoardIDE
An IDE controller on the ICH2 chipset provides IDE HDD/CD-ROM with
PIO, Bus Master and Ultra DMA33/66/100 operation modes.
Can connect up to four IDE devices.
On-Board Peripherals
On-Board Peripherals include:
- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M and
2.88Mbytes.
- 2 serial ports (COM A + COM B).
- 1 parallel port supports SPP/EPP/ECP mode.
- 4 USB ports (Rear * 2/ Front * 2).
- 1 IrDA connector for SIR.
- 1 RJ-45 LAN jack.
- 1 audio/game port.
Audio
AC’97 link controller integrated in ICH2 chipset.
2-channel software audio codec AD1885.
LAN
PCI local bus single-chip Fast Ethernet Controller, RealTek RTL8100L.
- Integrated Fast Ethernet MAC and PHY in one chip.
- Supports 10Mb/s and 100Mb/s auto-negotiation operation.
- Compliance with PCI v2.2/PC99 standard.
- Supports Wake-On-LAN and remote wake-up.
- Supports ACPI power management.
BIOS
The mainboard BIOS provides “Plug & Play” BIOS which detects the pe-
ripheral devices and expansion cards of the board automatically.
The mainboard provides a Desktop Management Interface (DMI) function
which records your mainboard specifications.
Dimension
Micro ATX Form Factor: 24.3cm x 23.1cm.
Mounting
6 mounting holes.
Autres manuels pour MS-6507
1
Table des matières
Autres manuels MSI Carte mère
MSI
MSI MS-7139 Manuel utilisateur
MSI
MSI H61M-E23 (G3) Series Manuel utilisateur
MSI
MSI B460M PRO-VDH WIFI Manuel utilisateur
MSI
MSI MAG B660 TOMAHAWK WIFI DDR4 Manuel utilisateur
MSI
MSI B365M PLUS Manuel utilisateur
MSI
MSI MS-6570E Manuel utilisateur
MSI
MSI MS-7516 Manuel utilisateur
MSI
MSI MS-5153 Manuel utilisateur
MSI
MSI MS-7346 Manuel utilisateur
MSI
MSI PRO B760M-P DDR4 Manuel utilisateur
MSI
MSI B650 CARBON WIFI Manuel utilisateur
MSI
MSI X99A SLI PLUS Manuel utilisateur
MSI
MSI G31M3 Series Instructions d'utilisation
MSI
MSI MS-7082 Manuel utilisateur
MSI
MSI MS-7143 Manuel utilisateur
MSI
MSI 845PE Neo Manuel utilisateur
MSI
MSI B450-A PRO Manuel utilisateur
MSI
MSI MS-6378 Manuel utilisateur
MSI
MSI 865PE/G Neo2-P MS-6728 Manuel utilisateur
MSI
MSI H310M PRO-VH Manuel utilisateur
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
