MSI MS-6151 Manuel utilisateur

MS-6151

CHAPTER 1CHAPTER 1

CHAPTER 1 INTRODUCTIONINTRODUCTION

INTRODUCTIONINTRODUCTION

INTRODUCTION

1-1

The ATX BX9 mainboard is a high-performance personal computer

mainboard based on the Intel®Pentium®II processor. This mainboard

combinesleadingedgeAGPATI®3D Rage PRO Turbo/Rage 128VR (re-

served) technology in graphics and Creative®ES1371/ES1373 (reserved) PCI

technology in audio. The Intel®Pentium®II processor supports MMXTM

(Multimedia Extension) technology.

The mainboard uses the highly integrated Intel®82443BX AGP chipset to

support the PCI/ISA and Green standards, and to provide the Host/AGP

bridge. The Intel®82371EB chipset integrates all system control functions

such as ACPI (Advanced Configuration and Power Interface). The ACPI

provides more Energy Saving Features for the OSPM(OS Direct Power

Management) function. The Intel®82371EB chipset also improves the IDE

transfer rate by supporting Ultra DMA/33 IDE that transfers data at the rate

of33MB/s.

The mainboard also supports the System Hardware Monitor Controller as an

optional function. Its functions include: CPU /power supply/chassis fan

revolution detect, CPU/system voltage monitor, system temperature monitor,

and chassis intrusion detect(optional).

Chapter 1

INTRODUCTION

CHAPTER 1CHAPTER 1

CHAPTER 1 INTRODUCTIONINTRODUCTION

INTRODUCTIONINTRODUCTION

INTRODUCTION

1-2

1.1 Mainboard Features

Processor

lSlot 1 for Intel®Pentium®II/CeleronTM processor.

lSupports233MHz,266MHz,300MHz,333MHz,350MHz,400MHz,

450MHz,andfaster.

Chipset

lIntel®82443BX/PIIX4Echipset.

ClockGenerator

l66 and 100MHz clocks are supported.

MainMemory

lSupports six memory banks using three 168-pin unbuffered DIMM.

lSupportsa maximum memorysizeof 384MB(8Mx 8) or768MB(16M x4)

registered DIMM only.

lSupportsECC(1-bitErrorCodeCorrect)function.

lSupports 3.3v SDRAM DIMM.

Slots

lOne AGP (Accelerated Graphics Port) slot.

- AGP specification compliant

- AGP 66/133MHz 3.3v device support

lFour 32-bit Master PCI Bus slots and two 16-bit ISA bus slots.

lSupports 3.3v/5v PCI bus Interface.

On-BoardIDE

lAn IDE controller on the Intel®PIIX4E PCI Chipset provides IDE HDD/

CD-ROM with PIO, Bus Master and Ultra DMA/33 operation modes.

lCan connect up to four IDE devices.

CHAPTER 1CHAPTER 1

CHAPTER 1 INTRODUCTIONINTRODUCTION

INTRODUCTIONINTRODUCTION

INTRODUCTION

1-3

On-BoardPeripherals

lOn-Board Peripherals include:

- 1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and

2.88Mbytes.

- 1 serial port (COM A) + 1 serial connector (COM B)

- 1 parallel port supports SPP/EPP/ECP mode

- 2 USB ports

-1IrDAconnectorforSIR/FIR.

-1VGA port

- 1 audio port (Line_In, Line_Out, and Mic_In jack) and 1 MIDI/Game

port

VGA

lATI®3DRAGE PRO TURBO/128VR(reserved)

-RunningonAGPBUS.

-Onboard8MBSDRAM.

-3DAcceleration.

- AGP 2x mode (133MHz) support pipelined and sideband protocols.

Note: Installing AGP graphics card into the AGP slot, will automatically

disable the onboard VGA.

Sound

lCreative®ES1371/ES1373(reserved)

-RunningonPCIBUS.

-64Voice andAC3Capable(ES1373 only)

- Support Direct Sound and Direct Sound 3D

-AC97’ Compliant

I/OChip

lWinbond®multi super I/O W83977EF

- 2M bps fast tape drive, IRQ sharing

- Device Power Management

- 8042-based keyboard controller (support PS/2 mouse)

CHAPTER 1CHAPTER 1

CHAPTER 1 INTRODUCTIONINTRODUCTION

INTRODUCTIONINTRODUCTION

INTRODUCTION

1-4

BIOS

lThe mainboard BIOS provides “Plug & Play” BIOS which detects the

peripheral devices and expansion cards of the board automatically.

lThe mainboard provides a Desktop Management Interface(DMI) function

which records your mainboard specifications.

lACPI(Advanced Configuration and Power Interface) feature.

Dimension

lATX FormFactor: 30cm(L) x 19.2cm(W) x 4layersPCB

Mounting

l6 mounting holes.

SystemHardwareMonitor(optional)

lCPU/Power Supply/Chassis Fan Revolution Detect

lCPU Fan Control (the fan will automatically stop when the system enters

suspend mode)

lSystem Voltage Detect

lCPU Overheat Warning.

lDisplay Actual Current Voltage

OtherFeatures

lKeyboard Password Wake-Up (reserved)

lLAN Wake-Up

lInternal/External Modem Wake-Up

CHAPTER 1CHAPTER 1

CHAPTER 1 INTRODUCTIONINTRODUCTION

INTRODUCTIONINTRODUCTION

INTRODUCTION

1-5

1.2 Mainboard Layout

MS-6151 ATX BX9 Mainboard

PCI SLOT 3

PCI SLOT 2

PCI SLOT 1

ISA SLOT 1

ATX

Power Supply

FW82443BX

SLOT 1

DIMM 2

Top: mouse

Bottom:

keyboard

Top:Port1

USB

DIMM 1

IDE2

Bottom:

Port2

IDE1

FDD

ATI3D

RAGEPRO

FW82371EB

JMDM1

Creative

ES1371

SYSFAN

JFP1

JGS1

JGL1

JBAT1

JWOL1

BIOS

J4: MDM_IN

J5: AUX_IN

COM 2

CPUFAN

JSOR1

JRMS1

SW1

PSFAN

BATT

Top: LPT

Bottom:

COMA

VGAPort

Top: Midi/

GamePort

Bottom:

Line-Out

Line-In

Mic

J6: CD_IN

SDRAM

JVSB1

(Reserved)

System

Hardware

Monitor

(optional)

SDRAM

DIMM 3

SW2

PCI SLOT 4

ISA SLOT 2

AGP SLOT

Buzzer

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-1

Chapter 2

HARDWARE INSTALLATION

2.1 Central Processing Unit: CPU

The mainboard operates with Intel®Pentium®II/CeleronTM processor. The

mainboard uses a CPU Slot called Slot 1 for easy CPU installation and a

jumper switch (SW1) to set the proper speed for the CPU. The CPU should

always have a Heat Sink and a cooling fan attached to prevent overheating.

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-2

2.1-1 CPU Installation Procedures

A. OEM Pentium®II Processor Installation Procedures

Different kinds of Pentium®II processor that is currently used: the OEM

version, the Boxed version, and CeleronTM. OEM Pentium®II Processor has

no Heat Sink, Fan and Heat Sink Support, the Boxed Pentium®II Processor

is provided with Heat Sink w/ fan and Heat Sink Support, while the

CeleronTM processor is a plain processor card without cover or heatsink..

Required Things:

Pentium®IIprocessor-Processor.

*RetentionMechanism(RM)- Plastic Guide that holds the S.E.C.Catridge

in the Slot 1 connector.

*RetentionMechanism AttachMount(RMAM)-Bolt/Bridge assemblies

inserted up through the bottom of the

motherboard. RM secures to RMAM ( 2

RMAM required per RM ).

*Heat Sink SupportBase (HSSBASE) - Plastic support bar mounted to

the mainboard under the ATX heatsink.

(One leg is always bigger than the other one)

Processor

Lock

Retention

Mechanism

Pentium®II

Processor

Heat Sink

W/Fan

Notch Hole

Heat Sink

Support Base Heat Sink

Support Pin

Heat Sink

Support

Top Bar

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-3

*HeatSink Support Pin (HSSPIN)- Plastic pins inserted through the

HSSBASE to secure it to the mainboard (2

required per Assembly).

*Heat Sink Support Top Bar (HSSTOP) - Plastic bar that clips onto the

HSSBASE through the fins on the ATX

heatsink.

**Heat Sink w/ fan - Heat Sink that can be attached to the Pentium®II

processorwithmetalclip.

Note:* Provided by MSI mainboard.

** Provided by Special request.

HSSPIN

HSSTOP

HSSBASE

RMAM

CHAPTER 2CHAPTER 2

CHAPTER 2 HARDHARD

HARDHARD

HARDWW

WARE INSTARE INST

ARE INSTARE INST

ARE INSTALLAALLA

ALLAALLA

ALLATIONTION

TIONTION

TION

2-4

SLOT1

Retention

Mechanism

êê

Key

êê

Retention

Mechanism

Attach Mount

Notch

Key

Step 1: Insert the Retention Mechanism Attach Mount at the bottom

of the mainboard.

Step 2: Install the Retention Mechanism.

Look for the key on Slot 1, and match it with the Notch Key on the

Retention Mechanism for proper direction. Then, attach the

Retention Mechanism to the Retention Mechanism Attach Mount.

Use a Screwdriver to secure the Retention Mechanism.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels MSI Carte mère

MSI

MSI MS-6198 Manuel utilisateur

MSI

MSI K8T Neo2-F Manuel utilisateur

MSI

MSI PRO B660M-G DDR4 Manuel utilisateur

MSI

MSI MS-6378 Manuel d'instructions

MSI

MSI B150A GAMING PRO Manuel utilisateur

MSI

MSI MAG B550 TORPEDO Manuel utilisateur

MSI

MSI MAG Z690 TOMAHAWK Manuel utilisateur

MSI

MSI B450 GAMING PLUS MAX Manuel utilisateur

MSI

MSI PRO B760-P WIFI Manuel utilisateur

MSI

MSI MEG Z390 GODLIKE Manuel utilisateur

MSI

MSI MS-6558/G Manuel utilisateur

MSI

MSI X370 XPOWER GAMING TITANIUM Manuel utilisateur

MSI

MSI Z590 PRO Wi-Fi Manuel utilisateur

MSI

MSI MS-6567 Manuel utilisateur

MSI

MSI 760GM-P31 Series Manuel utilisateur

MSI

MSI G45TM-E53 Series Manuel utilisateur

MSI

MSI MAG B660 TOMAHAWK WIFI DDR4 Manuel utilisateur

MSI

MSI MS-7028 Manuel utilisateur

MSI

MSI 865PE NEO2-LS - Motherboard - ATX Manuel utilisateur

MSI

MSI MAG B660M MORTAR WIFI DDR4 Manuel utilisateur

MSI

MSI MS-7758 (v3.x) Manuel utilisateur

MSI

MSI MS-7173 Manuel utilisateur

MSI

MSI MS-6380 Manuel utilisateur

MSI

MSI G41M-P34 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur