MSI 815 PRO Manuel utilisateur

CHAPTER 1 INTRODUCTION

1-1

The815PRO(MS-6326)ATX S2 mainboardisahigh-performance

computer mainboard based on Intel®815 chipset. The 815 PRO is optimized

to support the Intel®Pentium®III (FC-PGA) processor for high-end busi-

ness/personal desktop markets.

The Intel®815 chipset integrates a Display Cache SDRAM control-

ler that supports a 32-bit 133MHz SDRAM array for enhanced integrated 3D

graphics performance. It is a highly-flexible chipset which is designed to

extend the basic graphics/multimedia PC platform up to the mainstream

performance desktop platform.

The Intel®815 chipset implements the host address, control, and

data bus interfaces within a single device. It takes advantage of the

pipelined addressing capability of the processor to improve the overall

system performance. In addition, the chipset also integrates a system

memory controller that supports a 64-bit 100/133 MHz SDRAM array.

The Intel®82801AA (ICH) chipset is a highly integrated

multifunctional I/O Controller Hub that provides the interface to the PCI Bus

and integrates many of the functions needed in today’s PC platforms. It

communicates with the host controller over a dedicated hub interface and

provides added flexibility in designing cost-effective system solutions.

Chapter 1

INTRODUCTION

CHAPTER 1 INTRODUCTION

1-2

1.1 Mainboard Features

CPU

lSupportSocket370 for Intel®CeleronTM/Pentium®III(FC-PGA) processor.

lSupport500MHz,550MHz,600MHz,633MHz, 667MHzandup to1GHz.

Chipset

lIntel®815chipset.(544 BGA)

-AGP4x/2x universal slot

-Support66/100/133MHz FSB

lIntel®ICHchipset.(241 BGA)

- AC’97 Controller Integrated

- 2 full IDE channels, up to ATA66

- Low pin count interface for SIO

MainMemory

lSupport three 168-pin DIMM sockets.

lSupport a 32 to 512MB using 16/64/128/256Mbit technology.

Slots

lOne AMR(Audio Modem Riser).

lOneAGP(AcceleratedGraphicsPort)2x/4xslot.

lFive PCI 2.2 32-bit Master PCI Bus slots.

lSupport 3.3v/5v PCI bus Interface.

On-BoardIDE

lAn IDE controller on the ICH chipset provides IDE HDD/CD-ROM with

PIO, Bus Master and Ultra DMA 66 operation modes.

lCan connect up to four IDE devices.

CHAPTER 1 INTRODUCTION

1-3

On-BoardPeripherals

lOn-BoardPeripherals include:

-1 floppy port supports 2 FDD with 360K, 720K, 1.2M,

1.44M and 2.88Mbytes.

- 1 serial port (COMA)

- 1 parallel port supports SPP/EPP/ECP mode

- 4 USB ports (Rear * 2 / Front * 2)

-1VGA port

Video

lGMCHchip integrated

l2D/3DGraphics

lIntel®D.V.M Technology

lFlexibleAGPIn-LineMemoryModule(AIMM) (optional)

lOneAGPSlotforexternalAGPcard

Audio

lICH chip integrated

BIOS

lThe mainboard BIOS provides “Plug & Play” BIOS which detects the

peripheral devices and expansion cards of the board automatically.

lThe mainboard provides a Desktop Management Interface(DMI) function

which records your mainboard specifications.

Dimension

lATX Form Factor

Mounting

l6 mounting holes.

CHAPTER 1 INTRODUCTION

1-4

1.2 Mainboard Layout

PCI SLOT 2

PCI SLOT 1

ATX

Power Supply

Intel

815

Chipset

Socket 370

DIMM 2

Top: mouse

Bottom:

keyboard

Top:Port 1

USB

IDE2

Bottom:

Port2

IDE1 FDD

JBAT1

Intel

FW82801AA

CD_IN

AUX_IN

CPUFAN

SYSFAN

Top:LPT

Bottom:

COMA

VGA

Top: Midi/

GamePort

Bottom:

Line-Out

Line-In

Mic

MDM_IN

ICH

AGP Slot

BATT

DIMM 1

AMR1

PCI SLOT 3

J10

JGL1

DIMM 3

COM B

JUSB1

PCI SLOT 4

PCI SLOT 5

815 PRO (MS-6326) ATX S2 Mainboard

JKBV1

PSFAN

DiagnosticLED

SW1

JVTT1

JUSBV2

BIOS

JMDM1

JWOL1

J11

J1 J2

JGS1

JP2

FWH

JP3

J7 J6

CHAPTER 2 HARDWARE INSTALLATION

2-1

CPU

Chapter 2

HARDWARE INSTALLATION

2.1 Central Processing Unit: CPU

The mainboard operateswith Intel®CeleronTM/Pentium®III (FC-PGA)

processor. The mainboard uses a CPU socket called Socket 370 for easy

CPU installation. The CPU should always have a Heat Sink and a cooling

fan attached to prevent overheating.

3. Press the lever down to

complete the installation.

2. Locate Pin 1 in the socket

and look for the white dot or

cut edge in the CPU. Match

Pin 1 with the white dot/cut

edge. Then, insert the CPU.

It should insert easily.

OpenLever

Pin1

Sliding

Plate

White dot/

Cut edge

Lever

1. Pull the lever sideways away

from the socket. Then, raise

the lever up to a 90-degree

angle.

Pin1

2.1-1 CPU Installation Procedures

CHAPTER 2 HARDWARE INSTALLATION

2-2

The mainboard CPU Bus Frequency can be set through BIOS setup.

If CPUClock = 100MHz

Core/Bus ratio = 7

then CPU core speed = Host Clockx Core/Bus ratio

= 700MHz

2.1-2 CPU Core Speed Derivation Procedure

CHAPTER 2 HARDWARE INSTALLATION

2-3

2.1-3 Overclocking Jumper: SW1

Overclocking is operating a CPU/Processor beyond its specified

frequency. SW1 jumper is used for overclocking.

SW1

SW1 Function

Auto detect/Default

Set from 133MHz to 160MHz through BIOS (DRAM: PC133)

Set from 133MHz to 167MHz through BIOS (DRAM: PC100)

Note: If you used this jumper for overclocking, you also need to

modify the CPU Bus ratio through BIOS.

Set from 100MHz to 150MHz through BIOS

Set from 66MHz to 100MHz through BIOS

CHAPTER 2 HARDWARE INSTALLATION

2-4

2.1-4 Fan Power Connectors: CPUFAN, SYSFAN &

PSFAN

These connectors support system cooling fan with + 12V. It supports

three pin head connector. When connecting the wire to the connector,

always take note that the red wire is the positive and should be con-

nected to the +12V, the black wire is Ground and should be connected to

GND. If your mainboard has System Hardware Monitor chipset on-

board, you must use a specially designed fan with speed sensor to take

advantage of this function.

For fans with fan speed sensor, every rotation of the fan will send out 2

pulses. System Hardware Monitor will count and report the fan rotation

speed.

Note: 1. Always consult vendor for proper CPU cooling fan.

2. CPU FAN supports the FAN control. You can install PC Alert

utility. This will automatically control the CPU FAN Speed according

to the actual CPU temperature.

CPUFAN

CPUFAN: Processor Fan

SYSFAN: SystemFan

PSFAN: Power SupplyFan

+12V

SENSOR

GND

SYSFAN

+12V

SENSOR

GND

PSFAN

+12V

SENSOR

GND

CHAPTER 2 HARDWARE INSTALLATION

2-5

2.2 Clear CMOS Jumper: JBAT1

A battery must be used to retain the mainboard configuration in CMOS

RAM. Short 1-2 pins of JBAT1 to store the CMOS data.

Keep Data Clear Data

Note: You can clear CMOS by shorting 2-3 pin, while the system is off.

Then, return to 1-2 pin position. Avoid clearing the CMOS while

the system is on, it will damage the mainboard. Always unplug

the power cord from the wall socket.

JBAT1

CHAPTER 2 HARDWARE INSTALLATION

2-6

2.3 Memory Installation

2.3-1 Memory Bank Configuration

The mainboard supports a maximum memory size of 512MB: It provides

three168-pinunbufferedDIMMs (Double In-Line Memory Module) sockets.

It supports 32MB to 512MB DIMM memory module.

DIMM1(Bank0+Bank1)

DIMM2(Bank2+Bank3)

DIMM3(Bank4+Bank5)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels MSI Carte mère

MSI

MSI Intel RAID Manuel utilisateur

MSI

MSI PRO X670-P WIFI Manuel utilisateur

MSI

MSI B550M-A PRO Manuel utilisateur

MSI

MSI B450 GAMING PRO CARBON AC Manuel utilisateur

MSI

MSI MS-7338 Manuel utilisateur

MSI

MSI 865GVM Manuel utilisateur

MSI

MSI X299 RAIDER Manuel utilisateur

MSI

MSI H81M-P32L Manuel utilisateur

MSI

MSI B560-A PRO Manuel utilisateur

MSI

MSI MS-7317 Manuel utilisateur

MSI

MSI MS-7502 Series Manuel utilisateur

MSI

MSI P965 Neo Series Manuel utilisateur

MSI

MSI H270M PRO-VDH Manuel utilisateur

MSI

MSI MAG B550M MORTAR WIFI Manuel utilisateur

MSI

MSI MS-9642 Manuel utilisateur

MSI

MSI Z490-A PRO Manuel utilisateur

MSI

MSI G52-M7246X1 Manuel utilisateur

MSI

MSI H67A-G43 B3 series Manuel utilisateur

MSI

MSI B450M-A PRO MAX Manuel utilisateur

MSI

MSI H61MA-E35 (B3) Manuel utilisateur

MSI

MSI Z270 KRAIT GAMING Manuel utilisateur

MSI

MSI P67A-GD65 (B3) Manuel utilisateur

MSI

MSI MEG Z490 UNIFY Manuel utilisateur

MSI

MSI 990XA-GD55 series Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur