Motorola AP6562 Manuel utilisateur

AP-6562 ACCESS POINT

INSTALLATION GUIDE

2AP-6562 Access Point

Zebra and the Zebra head graphic are registered trademarks of ZIH Corp. The Symbol logo is a registered

trademark of Symbol Technologies, Inc., a Zebra Technologies company.

Installation Guide 3

1.0 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1 Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.2 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.3 Site Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.4 AP-6562 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.4.1 Internal Antenna Model Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.4.2 External Antenna Model Package Contents . . . . . . . . . . . . . . . . . . . . . . . . 7

1.4.3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.0 Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.1 Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.2 Access Point Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.3 AP-6562 Hardware Mouting and Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.3.1 Mounting Bracket Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.3.2 Extension Arm Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.3.3 Pole Mounted Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.3.4 Vertical Pole Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.3.5 Wall Mounted Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.4 AP-6562 Internal Antenna Model Antenna Options. . . . . . . . . . . . . . . . . . . . . . 17

2.5 AP-6562 External Antenna Model Antenna Options . . . . . . . . . . . . . . . . . . . . . 18

2.6 AP-6562 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.0 Basic Access Point Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

4.0 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

4.1 AP-6562 Internal Antenna Model Electrical Specifications. . . . . . . . . . . . . . . . 33

4.2 AP-6562 Internal Antenna Model Physical Specifications. . . . . . . . . . . . . . . . . 33

4.3 AP-6562 Internal Antenna Model Antenna Specifications . . . . . . . . . . . . . . . . 33

4.4 AP-6562 External Antenna Model Electrical Specifications . . . . . . . . . . . . . . . 34

4.5 AP-6562 External Antenna Model Physical Specifications . . . . . . . . . . . . . . . . 34

4.6 Radio Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

4AP-6562 Access Point

5.0 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

5.1 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

5.2 Wireless Device Country Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

5.2.1 Country Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

5.2.2 Frequency of Operation - FCC and IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.3 Health and Safety Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.3.1 Warnings for Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

5.3.2 Potentially Hazardous Atmospheres - Fixed Installations . . . . . . . . . . . . . 37

5.3.3 Safety in Hospitals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

5.4 RF Exposure Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

5.5 International . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

5.6 Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

5.7 US and Canada . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

5.8 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

5.9 Radio Frequency Interference Requirements - FCC . . . . . . . . . . . . . . . . . . . . . . 39

5.10 Radio Frequency Interference Requirements - Canada . . . . . . . . . . . . . . . . . . 40

5.11 CE Marking ad European Economic Area (EEA) . . . . . . . . . . . . . . . . . . . . . . . . 41

5.12 Statement of Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

5.13 Other Countries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

5.13 Waste Electrical and Electronic Waste Equipment (WEEE). . . . . . . . . . . . . . . 43

5.14 Turkish WEEE Statement of Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

6.0 Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

7.0 AP-6562 Access Point China ROHS Compliance . . . . . . . . . . . . . . . . . . . . . . 46

Installation Guide 5

1 Introduction

The AP-6562 access point links wireless 802.11abgn devices, enabling the growth of your wireless network with a

cost effective alternative to standard access points. The AP-6562 access point provides multiple deployment

options.

The AP-6562 access point receives all power and transfers data through the same CAT-5 or better Ethernet cable.

An 802.3at Ethernet switch or power supply (specifically rated for the AP-6562) is required, such as the

AP-PSBIAS-7161-US or AP-PSBIAS-7161-WW outdoor rated power supply

An AP-6562 model access point uses WiNG 5 software as its onboard operating system. The access point’s unique

WiNG 5 software enables the access point to function as either a Virtual Controller AP capable of adopting and

managing up to 24 additional AP-6562 access points or a Standalone access point managed by its connected

controller.

If new to access point technology, refer to the WiNG Access Point System Reference Guide to familiarize yourself

with access point technology and the feature set supported by the WiNG operating system. The guide is available

at www.zebra.com/support.

The AP-6562 access point is approved under MODEL: AP-6562.

This document is written for the qualified network device installer.

1.1 Document Conventions

The following graphical alerts are used in this document to indicate notable situations:

NOTE Tips, hints, or special requirements that you should take note of.

CAUTION Care is required. Disregarding a caution can result in data loss or

equipment malfunction.

WARNING! Indicates a condition or procedure that could result in personal injury or

equipment damage.

6AP-6562 Access Point

1.2 Warnings

• Read all installation instructions and site survey reports, and verify correct equipment installation before

connecting the Access Point.

• Remove jewelry and watches before installing this equipment.

• Verify the unit is grounded before connecting it to the power source.

• Verify any device connected to this unit is properly wired and grounded.

• Verify there is adequate ventilation around the device, and that ambient temperatures meet equipment

operation specifications.

1.3 Site Preparation

• Consult your site survey and network analysis reports to determine specific equipment placement, power

drops, and so on.

• Assign installation responsibility to the appropriate personnel.

• Identify and document where all installed components are located.

• Ensure adequate, dust-free ventilation to all installed equipment.

• Identify and prepare Ethernet and console port connections.

• Verify cable lengths are within the maximum allowable distances for optimal signal transmission.

1.4 AP-6562 Package Contents

An AP-6562 access point is available in internal antenna and external antenna models. Contents differ depending

on the model ordered.

1.4.1 Internal Antenna Model Package Contents

AP-6562 internal antenna models (AP-6562-66030-US, AP-6562-66030-WW and AP-6562-66030-EU) include the

following:

• Access Point with internal antennas

• Weatherproof RJ45 plug kit

• AP-6562 Installation Guide (This Guide)

Part Number Description

AP-6562-66030-US AP-6562: Outdoor Dual Radio 802.11N US

AP-6562-66030-WR AP-6562 Outdoor Dual Radio 802.11N INTL

AP-6562-66030-EU AP-6562 Outdoor Dual Radio 802.11N EU

Installation Guide 7

1.4.2 External Antenna Model Package Contents

AP-6562 external antenna models (AP-6562-66040-US, AP-6562-66040-WW and AP-6562-66040-EU) include the

following:

• Access Point with external antenna connectors

• Weatherproof RJ45 plug kit

• AP-6562 Installation Guide (This Guide)

1.4.3 Features

• GE1/PoE LAN port

• Console port

• LED indicators (see AP-6562 LED Indicators on page 20)

The illustration below is of an internal antenna model.

The Access Point comes with dual radios supporting 802.11abgn. The access point contains runtime firmware

which enables the unit to boot after a power up. The runtime firmware on the access point and the firmware

downloaded from the connected controller can be updated via the Ethernet interface.

Part Number Description

AP-6562-66040-US AP-6562 Outdoor Dual Radio 802.11N US

AP-6562-66040-WR AP-6562 Outdoor Dual Radio 802.11N INTL

AP-6562-66040-EU AP-6562 Outdoor Dual Radio 802.11N EU

NOTE When operating in a Gigabit Ethernet environment, CAT-5e or CAT-6 cable

is recommended for Gigabit operation.

8AP-6562 Access Point

2 Hardware Installation

2.1 Installation Instructions

To prepare for the installation:

1. Match the model number on the purchase order with the model numbers in the packing list and on the

case of the access point.

2. Verify the contents of the box include the intended AP-6562 access point, and the included hardware

matches the package contents for an internal antenna access point (see Internal Antenna Model

Package Contents on page 6) or external antenna access point (see External Antenna Model

Package Contents on page 7).

3. Review site survey and network analysis reports to determine the location and mounting position for the

AP-6562 access point.

4. Connect a CAT-5 or better Ethernet cable to a compatible 802.3at power source and run the cable to the

installation site. Ensure there is sufficient slack on the cable to perform the installation steps.

2.2 Access Point Placement

For optimal performance, install the access point away from transformers, heavy-duty motors, fluorescent lights,

microwave ovens, refrigerators and other industrial equipment. Signal loss can occur when metal, concrete, walls

or floors block transmission. Install the access point in an open area or add access points as needed to improve

coverage.

Place the access point using the following guidelines:

• Orient the access point antennas vertically for best reception (applies to external antenna models only).

• When deploying outdoor mesh networks using a pole mounted installation, install the access point at an

ideal height of 30 to 35 feet from the ground.

To maximize the access point’s radio coverage area, conduct a site survey to define and document radio

interference obstacles before installing the access point.

NOTE When operating in a Gigabit Ethernet environment, CAT-5e or CAT-6 cable

is recommended for Gigabit operation.

Installation Guide 9

2.3 AP-6562 Hardware Mounting and Installation

It is recommended to use the AP-6562 mounting bracket kit (KT-147407-01) for most deployments. When a standoff

distance is required for a pole mounted or wall mounted installation, use the extension arm kit (KT-150173-01).

2.3.1 Mounting Bracket Kit

The AP-6562 mounting bracket kit (KT-147407-01) includes the access point bracket (left), angle adapter bracket

(center), and pole mount bracket (right) sections:

The access point bracket and the angle adapter bracket can rotated (plus or minus 15 degrees) and tilted (up to 45

degrees) to achieve the required angle and rotation.

The following ancillary hardware to assemble the mounting bracket sections is included in the kit::

Description Quantity

M6 serrated hex flanged screws 8

1/2 inch hex head nut 2

1/2 inch x 3/4 inch hex head bolt 2

10 AP-6562 Access Point

A torque wrench or ratchet with a 10mm adapter, or an adjustable wrench, can be used to assemble the mounting

brackets. A finished assembly of the mounting bracket kit is shown below. Assembly during deployment may

differ to achieve the required angle and rotation.

2.3.2 Extension Arm Kit

When mounting an AP-6562 on poles more than 3 inches in diameter, use the extension arm kit (KT-150173-01) to

provide a minimum standoff distance of twelve inches to avoid interference with the antennas. The extension arm

kit is only required for AP-6562 external antenna models.

Autres manuels pour AP6562

Table des matières

Autres manuels Motorola Point d'accès sans fil

Motorola

Motorola AP-621 Series Manuel utilisateur

Motorola

Motorola WiNG 5.5 Manuel utilisateur

Motorola

Motorola AP-51 Series Manuel d'installation et d'exploitation

Motorola

Motorola WS2000 - Wireless Switch - Network Management... Manuel utilisateur

Motorola

Motorola AP-5181 - Wireless Access Point Guide de référence rapide

Motorola

Motorola AP 5131 - Wireless Access Point Manuel utilisateur

Motorola

Motorola AP 7161 Manuel utilisateur

Motorola

Motorola AP-5181 - Wireless Access Point Manuel utilisateur

Motorola

Motorola AP-650 Series Manuel utilisateur

Motorola

Motorola MOTOMESH Duo 4300-49 Manuel utilisateur

Motorola

Motorola AP 6522M Manuel utilisateur

Motorola

Motorola AP-51XX Manuel d'installation et d'exploitation

Motorola

Motorola AP-7131N-FGR Manuel utilisateur

Motorola

Motorola WA840GP Manuel utilisateur

Motorola

Motorola WA840G Manuel utilisateur

Motorola

Motorola AP-6521E Manuel utilisateur

Motorola

Motorola WA840G Manuel utilisateur

Motorola

Motorola AP-8132 Manuel utilisateur

Motorola

Motorola WiNG 5.4.2 Manuel utilisateur

Motorola

Motorola WiNG 5.6 Manuel utilisateur

Motorola

Motorola WA840G Mode d’emploi

Motorola

Motorola AP-7131 Series Manuel d'installation et d'exploitation

Motorola

Motorola AP-8132 Manuel utilisateur

Motorola

Motorola P-7131N-FGR Manuel d'installation et d'exploitation

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur