Motorola WS2000 - Wireless Switch - Network Management... Manuel utilisateur

June 2008 Edition

1725-36066-001

Version D

VIEW Certified Configuration Guide

Motorola

WS 2000

with AP 300

Configuration Guide

PN: 1725-36066-001_D.doc

Trademark Information

Polycom® and the logo designs

SpectraLink®

LinkPlus

Link

NetLink

SVP

Are trademarks and registered trademarks of

Polycom, Inc. in the United States of America

and various countries. All other trademarks

used herein are the property of their respective

owners.

Patent Information

The accompanying product is protected by one

or more US and foreign patents and/or pending

patent applications held by Polycom, Inc.

pan-American copyright Conventions.

No part of this manual, or the software

described herein, may be reproduced or

transmitted in any form or by any means, or

translated into another language or format, in

whole or in part, without the express written

permission of Polycom, Inc.

Do not remove (or allow any third party to

remove) any product identification, copyright or

other notices.

Every effort has been made to ensure that the

information in this document is accurate.

Polycom, Inc. is not responsible for printing or

clerical errors. Information in this document is

subject to change without notice and does not

represent a commitment on the part of Polycom,

Inc.

Notice

Polycom, Inc. has prepared this document for

use by Polycom personnel and customers. The

drawings and specifications contained herein

are the property of Polycom and shall be neither

reproduced in whole or in part without the prior

written approval of Polycom, nor be implied to

grant any license to make, use, or sell equipment

manufactured in accordance herewith.

Polycom reserves the right to make changes in

specifications and other information contained

in this document without prior notice, and the

reader should in all cases consult Polycom to

determine whether any such changes have been

made.

No representation or other affirmation of fact

contained in this document including but not

limited to statements regarding capacity,

response-time performance, suitability for use,

or performance of products described herein

shall be deemed to be a warranty by Polycom

for any purpose, or give rise to any liability of

Polycom whatsoever.

Contact Information

Please contact your Polycom Authorized

Reseller for assistance.

Polycom, Inc.

4750 Willow Road,

Pleasanton, CA 94588

http://www.polycom.com

Motorola WS 2000 with AP 300

PN: 1725-36066-001_D.doc 3

Introduction

Polycom’s Voice Interoperability for Enterprise Wireless (VIEW)

Certification Program is designed to ensure interoperability and high

performance between SpectraLink Wireless Telephones and WLAN

infrastructure products.

The products listed below have been thoroughly tested in Polycom’s

lab using the VIEW Certification Test Plan. This document details

how to configure the WS 2000 Wireless Switch and the AP 300 access

point (AP) with SpectraLink Wireless Telephones.

Certified Product Summary

Manufacturer: Motorola:

http://support.symbol.com/support/product/manuals.do

Approved products: Wireless Switch Access Point

WS 2000

†AP 300

†

RF technology: 802.11b/g

Radio frequency: 2.4 – 2.484 GHz

Quality of service: SpectraLink Voice Priority (SVP)

Security: WPA-TKIP (PSK), WPA2-CCMP (PSK)

Wireless Switch firmware version certified: 2.2.1.0-018R

SpectraLink handset models certified: ** e340/h340/i640 8020/8030

SpectraLink handset software certified: 89.134 122.010 or greater

SpectraLink radio mode: 802.11b 802.11b 802.11g 802.11a

Maximum telephone calls per AP: 8 8 Not certified

Recommended network topology: Switched Ethernet

†Denotes products directly used in VIEW Certification testing

** SpectraLink handset models 8020/8030, e340/h340/i640 and their OEM derivates are VIEW Certified

with the WLAN hardware and software identified in the table. Throughout the remainder of this

document they will be referred to collectively as “SpectraLink Wireless Telephones”.

Service Information

If you encounter difficulties or have questions regarding the

configuration process, please contact Motorola technical support at

(800) 653-5350, or at

http://www.symbol.com/services/contactsupport.

Configuration Guide

PN: 1725-36066-001_D.doc

Known Limitations

Voice quality may be impaired in an environment with heavy

wireless TCP traffic, such as FTP data transfers.

Access Point Capacity and Positioning

Please refer to the Polycom Deploying Enterprise-Grade Wi-Fi Telephony

white paper. This document covers the security, coverage, capacity

and QoS considerations necessary for ensuring excellent voice quality

with enterprise Wi-Fi networks.

For more detailed information on wireless LAN layout, network

infrastructure, QoS, security and subnets, please see the Best Practices

Guide for Deploying SpectraLink 8020/8030 Wireless Telephones. This

document identifies issues and solutions based on Polycom’s

extensive experience in enterprise-class Wi-Fi telephony, and

provides recommendations for ensuring that a network environment

is adequately optimized for use with SpectraLink 8020/8030 Wireless

Telephones.

Motorola WS2000 with AP 300

PN: 1725-36066-001_D.doc 5

Network Topology

The following topology was used during VIEW Certification testing.

Configuration Guide

PN: 1725-36066-001_D.doc

Configuration Settings

Installing a new image

The VIEW Certified firmware release can be obtained from Motorola

‘Dev Zone’. Upgrading the WS 2000 Wireless Switch to the new

firmware can be done through the Web interface or through the

command line interface (CLI). Place the image on the FTP server,

TFTP server or through Compact Flash card, depending on the file

transfer mechanism chosen.

Installing firmware through the CLI

1. Enter your username and password to log into the CLI. The

defaults are user: admin password: symbol. The serial interface

parameters are 19200,8,n,1,n.

2. Connect the FTP/TFTP server to subnet 1.

a. For TFTP, issue the following commands.

admin>

admin>system

admin(system)>config

admin(system.config)>set server 192.168.0.100

admin(system.config)>set fw file

mf_02010100009R.bin

admin(system.config)>update tftp s1

b. For FTP, issue the following commands.

admin>

admin>system

admin(system)>config

admin(system.config)>set server 192.168.0.100

admin(system.config)>set fw file

mf_02010100009R.bin

admin(system.config)>set fw path /home/<user>

admin(system.config)>set user <username>

admin(system.config)>set passwd <password>

admin(system.config)>update ftp s1

3. The WS 2000 Wireless Switch will reboot and load the firmware.

Motorola WS2000 with AP 300

PN: 1725-36066-001_D.doc

Installing firmware through the Web interface

1. Open the WS 2000 applet by entering the IP address of the

wireless switch: http://192.168.0.1

2. In the navigation pane, click Firmware Update. The Firmware Update

page will appear.

3. Under Filename, enter the firmware file name from the TFTP

server.

4. Click the TFTP Server on Subnet option.

5. At IP Address, enter the TFTP server IP address.

6. Click the Apply button.

7. Click the Perform Update button.

8. The WS 2000 Wireless Switch will reboot and load the firmware

from the location specified.

Configuration Guide

PN: 1725-36066-001_D.doc

Configuring the Wireless Switch from

the Default Configuration

Radio settings: The SpectraLink Wireless Telephones use an

802.11b radio; therefore VIEW Certification testing was done with

the 802.11b mode only and not the b/g mode.

Commands Default Settings VIEW Tested Settings

Beacon-interval 100 100 *

DTIM-period 10 3 *

BG mode B and G B only *

Power level 20 dBm 20 dBm

Channel 1 1

Rates 1, 2, 5.5, 11 1, 2, 5.5, 11

Short preamble Disabled Disabled *

* Denotes settings that are required for operation with SpectraLink Wireless

Telephones

Configuring radio settings through the CLI

To configure radio settings for the wireless switch, use the following

commands.

admin>

admin>network

admin(network)>ap

admin(network.ap)>

admin(network.ap)>set beacon intvl 1 100

admin(network.ap)>set dtim 1 3

admin(network.ap)>set rate 1 1,2,5.5,11 1,2,5.5,11

Setting the channel

Regulatory parameter values depend on country of operation and

radio type. Refer to documentation for regulatory product

information.

Motorola WS2000 with AP 300

PN: 1725-36066-001_D.doc 9

User selection

You can specify the desired channel manually by using the following

command.

admin(network.ap)>set reg 1 in 11 20

Configuring radio settings through the Web interface

1. In the WS 2000 applet navigation pane, select AP1<index> [BG].

2. In the AP1 page, go to 802.11 b/g mode, and select B Only from the

dropdown list.

3. Rates will be set automatically to 1, 2, 5.5, 11.

4. From the Channel and Power Level dropdown lists, select the desired

settings. Please consult your facility site survey to determine

power and channel settings.

5. Click the Apply button.

set reg <access port index> <indoor/outdoor>

Configuration Guide

PN: 1725-36066-001_D.doc

6. In the WS 2000 applet navigation pane, select AP<index> [BG].

7. In the AP1 page, click the Beacon Settings button.

8. In the Beacon Settings dialog box, set the DTIM Period to 3 Beacons.

9. Click the OK button.

10. Click the Apply button.

Autres manuels pour WS2000 - Wireless Switch - Network Management...

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Motorola Point d'accès sans fil

Motorola

Motorola AP-51 Series Manuel d'installation et d'exploitation

Motorola

Motorola VAP2500 Manuel utilisateur

Motorola

Motorola AP-51 Series Manuel d'installation et d'exploitation

Motorola

Motorola WA840G Manuel utilisateur

Motorola

Motorola WA840GV2 Manuel utilisateur

Motorola

Motorola AP 7181 Manuel utilisateur

Motorola

Motorola WA840GP Manuel utilisateur

Motorola

Motorola Canopy 300 Mbps Backhaul Manuel utilisateur

Motorola

Motorola AP-7131N-FGR Manuel d'installation et d'exploitation

Motorola

Motorola PMP 320 Manuel

Motorola

Motorola 5750APUSG Manuel utilisateur

Motorola

Motorola PMP 320 Manuel utilisateur

Motorola

Motorola AP-6521 Series Manuel utilisateur

Motorola

Motorola AP-8163 Manuel utilisateur

Motorola

Motorola TLN3221B Manuel utilisateur

Motorola

Motorola AP-7562 Manuel utilisateur

Motorola

Motorola AP6522E Manuel utilisateur

Motorola

Motorola AP-8132 Manuel utilisateur

Motorola

Motorola AP-6521 Series Manuel utilisateur

Motorola

Motorola PTP 600 Series Manuel utilisateur

Motorola

Motorola AP-5181 - Wireless Access Point Guide de référence rapide

Motorola

Motorola WiNG 5.7.1 Manuel utilisateur

Motorola

Motorola AP-6511 Manuel utilisateur

Motorola

Motorola AP6562 Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur