Motorola H690 Manuel utilisateur
Quick Start Guide
motorola
H690
Before using this product, read the Important Safety and L
eg
BEFORE YO
Take a moment before you get started to famil
i
Bluetooth® Handsfree Headset. Along with yo
for both charging and storage.
Microphone
Indicator
Light
Call
Button
Power
Switch
Charging
Contacts
(on reverse
side)
Volume
Buttons
Speaker
START HERE >
eg
al Information pamphlet and follow its instructions.
U BEGIN
i
arize yourself with your new H690
ur headset, a desktop charger is provided
Charging
Contacts
Charger
Port
Charging
Contacts
1
1
3
C
H
Your He
a
2
Note: Earhook must be rotated to the orientation
show above to ensure charging contacts connect.
Note: You can only charge
You cannot plug a Motoro
l
Remove plastic seal off of ear cushion on
speaker.
Plug the Motorola charger into the port on the
desktop charger.
Place headset onto desktop charger, as shown.
Make sure charging contacts on the headset
and desktop charger connect.
2
3
Note: Headset is not functional while charging.
H
ARGE
a
dset's Battery
When placing the headset on the desktop
charger, the indicator light turns red when
the battery is charging. It may take up to 1
minute for the indicator light to turn on.
When the headset's battery is fully charged
(about 2.5 hours), the indicator light turns
green.
Note: This product uses a lithium ion, rechargeable,
non-replaceable battery. Under normal use, the expected life
of the rechargeable battery is approximately 400 charges.
the headset from the desktop charger.
l
a charger directly into the headset.
2
START BLUETOOTH
FEATURE
Your Phone
Press (Menu)> Settings > Connection >
Bluetooth Link > Setup.
Scroll to Power.
Select Change.
Scroll to On.
Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn it off.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
1
2
3
4
5
Your phone's Bluetooth feature is off by default.
To use your headset, turn on the Bluetooth
feature in your phone.
For most Motorola phones (from home screen):
M
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© 2008 Motorola, Inc. All rights reserved.
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.motorola.com
1-877-MOTOBLU
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
Guide Number: 6809521A35-B
Bluetooth QD ID: B013132
Indicator Light
(steadily blue
for pairing mode)
3
PAIR
Your Headset
Before you can use your headset, you must pair
(link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING
MODE
Remove headset from desktop charger and
power on by sliding Power switch to the On
position (towards Power symbol on headset).
The indicator light first flashes during power
up, then initiates easy pairing. After a few
moments, the indicator light will be steadily lit
in blue to indicate headset is in pairing mode.
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
3
4
5
1
2
For most Motorola phones:
On your Motorola phone, press (Menu)>
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
Select Motorola H690.
Select OK or Ye s to pair your headset with
your phone.
Enter the passkey: 0000 (for most phones)
Select OK.
When your headset successfully pairs and
connects with your phone, the indicator light
changes from steadily lit to flashing blue and
purple.
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.
M
4
TEST AND USE
Your phone and headset are now paired and
ready to make and receive calls.
To make a call:
Place the headset over your ear. See
"Wearing the Headset" on the reverse side
of this guide.
On the phone, dial the number you want to
call and press SEND key on your phone.
If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, make sure
your headset is turned ON and your phone's
Bluetooth feature is ON.
1
2
USING YOUR H690
See
Features and
Functions Guide
on the reverse side
for information on
using your H690
TROUBLESHOOTING
My headset will not charge.
Make sure your earhook and ear cushions are
properly orientated. See step 1 and “Ear
Cushions and Your Headset” to see proper
orientation.
My headset will not enter pairing mode.
Make sure that any devices previously paired with
the headset are turned off. If the indicator light is
not steadily lit in blue, turn off both the other
device and headset, wait 10 seconds, then turn
headset back on. Wait for the indicator light to
become steadily lit in blue, indicating the headset
is now in pairing mode.
My phone doesn’t find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it’s not
working.
Make sure your phone is on, and the Bluetooth
feature is turned on in your phone (see step 2). If
Bluetooth was turned off or was turned on only
temporarily, you may need to restart it (see step
2) and pair your phone and headset again (see
step 3).
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side
of this guide
to complete initial setup
of your H690.
Features and
Functions Guide
Power
Switch
Indicator
Light
TURNING H690
ON AND OFF
To turn ON your H690, slide the Power
switch towards the power symbol, as
shown below. The indicator light first flashes
blue for several seconds, then:
To turn OFF your H690, slide the Power
switch away from the power symbol. The
indicator light will turn off.
●
flashes blue (if paired and connected with
another device)
becomes steadily blue (if ready to be
paired)
●
EAR CUSHIONS A
N
Your H690 headset is supplied with multiple ear
cushions. Your headset’s performance is greatly
dependent upon achieving a good fit on your
ear. Therefore, we recommend trying all the
supplied ear cushions with your headset.
The ear cushion is fitted onto the end of your
headset’s earpiece speaker like shown, and
placed onto your ear when using your headset.
N
D YOUR HEADSET
When fitting an oval-shaped ear cushion on
your headset, be sure the cushion is pointing
towards the microphone, as shown below.
WEARING THE
HEADSET
To wear your headset, flex the earhook and
loop it over your ear as shown.
Be sure to position the ear cushion into your
ear canal for optimal audio performance and
comfort.
CHANGING FOR USE
ON OTHER EAR
Gently lift and pull the
top of the earhook up
and off speaker stem, as
shown.
Flip the headset over.
Attach the earhook to
the speaker stem, as
shown.
1
2
3
You can wear your H690 headset on your left or
right ear. The headset comes ready for the right
ear. To change the headset for the left ear:
CHECKING
BATTERY LEVEL
While your headset is turned on and not on
a call, you can check the battery charge
level by pressing and holding both Volume
buttons.
Note: This feature does not work when headset is in
pairing mode.
The indicator light displays charge status
until you release the buttons. See “Indicator
Light” for details on indicator light and
charge status.
• The essential requirements and
other relevant provisions of Directive
1999/5/EC.
• All other relevant EU Directives.
European Union Directives
Conformance Statement
Product
Approval
Number
The above gives an example of a typical Product
Approval Number.
You can view your product’s Declaration of Conformity
(DoC) to Directive 1999/5/EC (to R&TTE Directive) at
www.motorola.com/rtte. To find your DoC, enter the
product Approval Number from your product’s label in
the “Search” bar on the web site.
Hereby, Motorola declares that this
product is in compliance with:
Product
Approval
Number
MAKING CALLS
Note: Your H690 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
Function Action
Receive a call Tap the Call button
Mute or unmute a call Tap both Volume
buttons
Reject a call Press and hold a
Volume button until
you hear two
descending tones
End a call Tap the Call button
Redial last call Press and hold the
Call button until you
hear two ascending
tones
Make a voice dial call Tap the Call button
and speak the
name after the tone
MAKING CALLS CONTINUED
Function Action
Answer a second Press and hold Call
incoming call button
End an active call and Tap the Call button
resume a call on hold
Reject a second Press and hold either
incoming call Volume button until
you hear an audio
tone
Note: Some features are phone/network dependent.
INDICATOR LIGHT
With the Charger Plugged In
Headset Indicator Headset Status
Red Charging (battery
level less than 80%
charge)
Yellow Charging (battery
level more than 80%
charge)
Green Charging complete
None Not charging*
When Checking Battery Level
Headset Indicator Available Talk Time
Green Up to 5.5 hours
Yellow 30 minutes to 5 hours
Red Less than 30 minutes
*See charging guidelines in the Legal and Safety pamphlet,
and remove the charger from the desktop charger and plug in
again.
With No Charger Plugged In
Headset Indicator Headset Status
Off Power off
Three blue flashes Powering on/off
Steady blue Pairing mode
Rapid blue/purple flashes Connection successful
Quick blue flash Incoming/outgoing call
Slow blue pulse Connected (on a call)
Slow blue flash Standby (not on a call)
Slow red flash Idle (not connected
to phone)
Slow purple pulse Connected call muted
Quick red flash Low battery
Note: After 20 minutes on a call or of inactivity, the light stops
flashing to conserve power, but the headset remains on.
Note: To disable the indicator light, slide Power switch off, then
press and hold both Volume buttons AND slide Power switch
on (to turn headset on).
INDICATOR LIGHT
AUDIO TONES
Audio Tone Headset Status
Ring tone Incoming call
Single high tone Phone network not
available
High to low tone End call
Single high tone when Volume at minimum
pressing volume button or maximum
during a call
Ascending tone Mute enabled
Low tone Mute reminder
(repeated every
15 seconds)
Descending tone Mute disabled
Low to high tone Connection
confirmation/voice
activation
No audio indications; Out of range
deteriorating quality
Two tones Low battery
repeated every 30 sec.
Autres manuels pour H690
2
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Motorola casque
Motorola
Motorola VERVE ONES ME Manuel
Motorola
Motorola H270 - Headset - Over-the-ear Manuel utilisateur
Motorola
Motorola Noise-com ENMN4010 Manuel utilisateur
Motorola
Motorola HS810 - Headset - Over-the-ear Manuel utilisateur
Motorola
Motorola Moto Hint Instructions d'installation
Motorola
Motorola IMPRES PMLN6127 Manuel utilisateur
Motorola
Motorola 89333N Manuel utilisateur
Motorola
Motorola H270 - Headset - Over-the-ear Manuel utilisateur
Motorola
Motorola Tracks Air Manuel utilisateur
Motorola
Motorola H550 Manuel utilisateur
Motorola
Motorola H9 Manuel utilisateur
Motorola
Motorola H560 - Headset - Over-the-ear Manuel utilisateur
Motorola
Motorola PMLN8087 Manuel utilisateur
Motorola
Motorola H780 - Headset - Over-the-ear Manuel utilisateur
Motorola
Motorola 68000202346-A Manuel utilisateur
Motorola
Motorola H700 - H700 Manuel utilisateur
Motorola
Motorola Audex Jacket Series Manuel utilisateur
Motorola
Motorola HS850 - Headset - Over-the-ear Manuel utilisateur
Motorola
Motorola H375 - Headset - Over-the-ear Manuel utilisateur
Motorola
Motorola ELITE SLIVER Manuel utilisateur
