morse 40 Manuel utilisateur
Copyright 2020 - Morse Mfg. Co., Inc. Form PL40 (Updated 8 Jan, 2020) 1
The Specialist In Drum Handling Equipment
Models 40 and 40-30
Drum Cradle Trucks
Syracuse, NY 13208 U.S.A.
morsedrum.com (315) 437-8475
CONTENTS
Page
Receiving Procedures. . . . . . . . . . . . . . . . . . . . 1
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Information. . . . . . . . . . . . . . . . . . . . . 1 - 2
Machine Description. . . . . . . . . . . . . . . . . . . 2
Option. . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Assembly Instructions. . . . . . . . . . . . . . . . . . 3
Parts Lists and Diagrams. . . . . . . . . . . . . . . . . . 4
Operator’s Manual
for Morse Drum Cradle Truck
Models 40 and 40-30
Receiving Procedures
Every Morse drum handler is inspected prior to shipping. However,
damage may be incurred during transit.
Check for visible damage. If you choose to accept damaged•
freight, always sign noting the damage on the Bill of
Lading.
Document the damage and have the truck driver sign. We•
recommend keeping a digital camera at your receiving dock
for this purpose.
Open packages expeditiously to check the condition of the•
goods. There is only a 24 hour window to notify the carrier
of any concealed damage.
Immediately• report all damage to the shipping company!
Then you may contact Morse for assistance with your
freight claim.
Morse Manufacturing will not be held responsible for any•
damaged freight that is not signed for as damaged.
Limited 2 Year Warranty
Morse drum handling equipment is guaranteed against defects in
workmanship or materials for two years when used properly within
its rated capacity. Warranty does not cover wear from normal use
or damage from accident or abuse. Motors and other purchased
parts carry the warranties of their manufacturers.
For warranty claims, contact your Morse Dealer to obtain a
return authorization number, and for return freight advice. Return
freight must be prepaid.
In all instances, liability is limited to the purchase price paid or to
repairing or replacing the product. Customer assumes liability for
anymodications,unauthorizedrepairsorpartssubstitution.
Safety Information
While Morse Manufacturing Co. drum handling equipment is
engineeredforsafetyandeciency,ahighdegreeofresponsibility
must be placed upon the machine operator to follow safe practices,
based primarily on common sense, upon which true safety
depends.
Failure to follow the safety precautions in this manual can result in
personal injury or property damage. Observe the same precautions
as with similar machinery where carelessness in operating or
maintenance is hazardous to personnel. Carefully read the safety
precautions below and throughout this manual.
Review the Material Safety Data Sheet(s) for the material(s) in
the drum(s) and take all necessary precautions. Safety shoes,
work gloves, hard hat and other personal protective devices are
recommended.
Prior to initial use, inspect all moving parts. Perform necessary
load test, inspections, operator training, etc.
The Specialist In Drum Handling Equipment
Models 40 and 40-30
Drum Cradle Trucks
Operator’s Manual for Morse Drum Cradle Truck Models 40 and 40-30
morsedrum.com
Copyright 2020 - Morse Mfg. Co., Inc. Form PL40 (Updated 8 Jan, 2020) 2
Safety Information (continued)
DANGER - Indicates a situation which, if not avoided, will result in serious injury or death.
This signal word is limited to the most extreme situations.
WARNING - Indicates a situation which, if not avoided, could result in serious injury or death.
CAUTION - Indicates a situation which, if not avoided, can result in damage to the machine.
WARNING - The Drum Cradle Truck is designed to handle one drum of the types listed below under Machine
Description. DO NOT attempt to handle any other type of drum or object. DO NOT exceed the weight capacity
of 700 Lb. (318 kg).
WARNING -DoNotModifytheUnit.UndernocircumstancesshouldanymodicationsbemadetotheMorse
machinerywithoutfactoryauthorization.Anymodicationsmayvoidthewarranty.Thismachinewasdesigned
toperformaspecicjobandalterationsmayresultininjurytooperatorormachine.
WARNING -NoLooseFittingClothing.Wearclose-ttingclothingandsafetyequipmentappropriatetothejob.
Loosettingclothingmaybecomecaughtonthemachineryandcauseseverepersonalinjury.
CAUTION - Wear safety shoes with non-slip soles and hard toe protection.
CAUTION: DONOTallowdrumtoimpactonoor,ground,ordumpingstation,etc.
Machine Description
The model 40 is designed to tilt an upright 55-gallon steel drum to horizontal for dispensing. The top rim of a 55-gallon (210 liter) steel
drumis18.5”(47cm)fromtheoorwheninhorizontalpositiononthemodel40.Model40-30isdesignedtotiltanupright30-gallon
(114 liter) steel drum to horizontal for dispensing.
The maximum full-drum capacity is 700 Lb. (318 kg).
Option
Model 31 Tipping Lever sold separately for use with Model 40 or Model 40-30 Drum Cradle assists in
pulling over your heavy drum from upright onto the drum cradle. Constructed with 40” (101.6 cm) steel
tubing with malleable iron double hook to engage the upper rim of your drum.
Maintenance
Periodically inspect all moving parts, framework and contact areas for signs of wear, fatigue or1.
loosening. Tighten, adjust or replace parts as necessary to prevent failure and maintain proper
function.
Apply a small amount of bearing grease to wheel bearing surface on each axle periodically.2.
Order replacement parts through your Morse Dealer.3.
Model 40 Cradle Truck shown with
Optional Model 31 Tipping Lever.
WARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and
2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to
the State of California to cause birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
The Specialist In Drum Handling Equipment
Models 40 and 40-30
Drum Cradle Trucks
Operator’s Manual for Morse Drum Cradle Truck Models 40 and 40-30
morsedrum.com
Copyright 2018 - Morse Mfg. Co., Inc. Form PL40 (Updated 8 Jan, 2020) 3
Assembly Instructions
Attach Front Axle and Wheels1.
(Rear Axle will be installed last)
Remove paint from ends of each axle. Apply a small
amount of bearing grease to wheel bearing surface on
each axle. Slide one wheel (item 5) onto each end of
both axles (item 6). With the angle iron on each side
frame (item 1 & 2) facing away from each other (see
diagram at right), insert threaded ends of axles into holes
in side frames and hand tighten a 3/8 nut (item 7) onto
each axle end.
DO NOT TIGHTEN BOLTS UNTIL CRADLE TRUCK
IS ENTIRELY ASSEMBLED
Attach Nose Piece2.
Fasten nose piece (item 4) to top of side frames using
four 5/16 x 5/8” bolts (item 8). Hand tighten 5/16 nut
(item 9) on each bolt.
Attach Back Strap3.
Fasten back strap (item 3) to back of side frames using
four 5/16 x 5/8” bolts (item 8) and 5/16 nuts (item 9).
Hand Tighten each bolt.
Attach Rear Axle4.
Tighten All Nuts and Bolts5.
Tighten bolts and nuts, alternating left and right to
maintain straight frame.
For replacement parts, please contact your Morse dealer.•
When ordering parts, please specify:•
Part number and description•
Model and Serial numbers•
The Specialist In Drum Handling Equipment
Models 40 and 40-30
Drum Cradle Trucks
Operator’s Manual for Morse Drum Cradle Truck Models 40 and 40-30
morsedrum.com
Copyright 2020 - Morse Mfg. Co., Inc. Form PL40 (Updated 8 Jan, 2020) 4
Model 40
ITEM QTY. PART # DESCRIPTION
1 1 1910L-P SIDE FRAME WELD, LEFT, 40
2 1 1910R-P SIDE FRAME WELD, RIGHT 40
3 1 1915-P ASM, BACK STRAP, 40
4 1 1918-P WELD, NOSE PIECE, 40
5 4 210-P WHEEL, MORTUF 3” X 1/2”BORE 36
6 2 209-P AXLE, 5/8” X 18”, 40
7 4 1169-P NUT, 3/8-16 REV HEX LOCK
8 8 215-P HHCS, 5/16-18 X 5/8 GR2
9 8 1634-P NUT, 5/16-18 WHIZ LOCK
Model 40-30
ITEM QTY. PART # DESCRIPTION
1 1 1910L-P SIDE FRAME WELD, LEFT, 40
2 1 1910R-P SIDE FRAME WELD, RIGHT 40
3 1 1922-P ASM, BACK STRAP, 40-30
4 1 1918-P WELD, NOSE PIECE, 40
5 4 210-P WHEEL, MORTUF 3” X 1/2”BORE 36
6 2 209-P AXLE, 5/8” X 18”, 40
7 4 1169-P NUT, 3/8-16 REV HEX LOCK
8 8 215-P HHCS, 5/16-18 X 5/8 GR2
9 8 1634-P NUT, 5/16-18 WHIZ LOCK
Ce manuel convient aux modèles suivants
1
Autres manuels morse Système de levage
morse
morse 525-N-125 Manuel utilisateur
morse
morse 400A-60-110 Manuel utilisateur
morse
morse 195AM-A Manuel utilisateur
morse
morse 520-114 Manuel utilisateur
morse
morse Hydra-Lift Drum Karrier 400AM-60-124 Manuel utilisateur
morse
morse 410M-124 Manuel utilisateur
morse
morse 410-114 Manuel utilisateur
morse
morse 195A-A Manuel utilisateur
morse
morse 456 Series Manuel utilisateur
morse
morse 80APS Manuel utilisateur
morse
morse 82H-125 Manuel utilisateur
morse
morse 152 Manuel utilisateur
morse
morse 525-N Manuel utilisateur
morse
morse 185A-HDSS Manuel utilisateur
morse
morse 515-N-110 Manuel utilisateur
morse
morse 400A-72SS-117 Manuel utilisateur
morse
morse Hydra-Lift Drum Karrier Manuel utilisateur
morse
morse 515SS-N-110 Manuel utilisateur
morse
morse 82H-124 Manuel utilisateur
morse
morse 400AM-60 Manuel utilisateur
Manuels Système de levage populaires d'autres marques
Braun
Braun NL955 Series Manuel utilisateur
haacon
haacon 1889.10 Manuel utilisateur
Protekt
Protekt AT 252 Manuel utilisateur
R. Beck Maschinenbau
R. Beck Maschinenbau HS 600 Manuel utilisateur
Nova Technology International, LLC
Nova Technology International, LLC NAS Series Manuel utilisateur
Genie
Genie Z-60/34 Manuel utilisateur
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuel utilisateur
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuel utilisateur
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuel de programmation
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuel de programmation
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuel de programmation
BERG
BERG BeNomic EasyLeaf Manuel utilisateur
