Monster ROCKIN ROLLER PRO Manuel utilisateur

Rockin Roller PRO

PRO

User Manual

FOR QUESTIONS OR TECHNICAL SUPPORT

Please call:

1.800.976.0677

Please do not return this product to the store.

TABLE OF CONTENTS

Warning & FCC Statement

Safety Instructions

Contents

Speaker Component

Getting Started

Charging Battery

Bluetooth Connection

NFC Connection

Wireless Microphone

6.3MM Guitar / Mic Input

AUX Input

FM Radio

USB Charging

Equalizer Presets

Auto Standby

TWS Connection

Troubleshooting

Specifications

Limited Warranty

A lightning flash and arrowhead within an equilateral triangle denotes the

presence of insulated “dangerous voltage” within the product’s enclosure.

The voltage may be of sufficient magnitude to constitute a risk of electric

shock to persons who come into contact with it.

An exclamation point within an equilateral triangle denotes the presence of

important operation & maintenance/service instructions.

FCC WARNING STATEMENT

WARNING

ponsible for compliance could void the user’s

authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential instal-

lation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different form that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation ExposureStatement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order

to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna

shall not be less than 20cm (8 inches) during normal operation.

PREVENT FIRE AND SHOCK HAZARDS. DO NOT USE EXTENSION CORDS

OR OUTLETS THAT EXPOSE PLUG BLADES. DO NOT EXPOSE CABLES

AND PLUGS TO RAIN OR MOISTURE.

DO NOT ATTEMPT TO PERFORM ANY SERVICING THAT IS NOT INCLUDED

IN THE OPERATING INSTRUCTIONS. DO NOT ATTEMPT TO REPLACE THE

BATTERY, AS INCORRECT INSTALLATION CAN CAUSE FIRE OR

EXPLOSION. FOR SERVICE, CONTACT QUALIFIED SERVICE PERSONNEL.

DO NOT REMOVE COVER OR BACK OF PRODUCT. THERE ARE NO

USER-SERVICEABLE PARTS INSIDE. ATTEMPTING TO MODIFY CONTROLS

OR PERFORMANCE BEYOND MANUFACTURER SPECIFICATIONS MAY

RESULT IN HAZARDOUS EXPOSURE TO RADIATION.

IMPORTANT SAFETYINSTRUCTIONS

1. Read all instructions and save them for personal reference in the future.

2. Follow all directions for operating the product.

3. Heed all warnings on the product and in the operation instructions.

4. Clean with a dry cloth only. Always unplug the product from any power source before cleaning.

5. Do not use third-party attachments or non-recommended accessories with this product.

6. Do not place product on an unstable surface, such as a cart, stand, tripod, table,

etc. Unstable surfaces may cause the product to fall and cause serious injury to

people and serious damage to the product. Follow all manufacturer instructions for

mounting and accessories.

7. Do not block or cover ventilation slots. Openings in the product cabin ensure reliable operation

and prevent overheating. Avoid placing on beds, sofas, and rugs, or mounting on racks or

bookcases, unless proper ventilation is provided.

8. Do not use plug incorrectly. The product may come with a polarized, alternating-current line

plug (one blade is wider/larger than the other). This is a safety feature: the plug will only go into

outlet receptacles one way. Do not force the plug. If the plug does not fit, contact your electrician

to replace the outlet.

9. Prevent power cord hazards. Route cords to avoid walking on them or pinching them, especially

at plug ends and connection points to the product and power outlets.

10. Unplug power cord when not in use. The product should not be plugged into a power source

when not in use for long periods of time.

11. Do not use this product near bodies of water. The product is not waterproof and cannot be fully

submerged in water. Power cords and electric currents should never be exposed to water.

12. Do not set up near heat sources. Avoid radiators, stoves, heat registers, amplifiers, and other

devices that produce heat. Avoid long exposure to sunlight and high temperatures.

13. Refer all service to qualified personnel. If the product becomes damaged during use or

encounters a malfunction, contact qualified service personnel. Do not attempt to service yourself.

( )

Rating Current:7A

ONLYWORK

WITH WALL POWER

840W(COMBINED)

FCC ID:2AAINBL-1100BT

CONTENTS

This box includes the following items:

• Monster Rockin’ Roller PRO speaker

• AC Power Cable

• AUX Cable

• Microphone (Wireless)

• User Manual (incl. Warranty Statement)

• Quick Start Guide

• Microphone Mount

If any items are missing, contact our customer service team at 1.800.976.0677.

SPEAKER COMPONENTS

1. Carry handle

2. Ruggedized housing

3. Telescoping handle

4. Battery life indicator

5. Power On/Off switch

6. AC power input

7. AC pass-through outlet

8. In-line rolling wheels

9. USB port (x2)

10. LED interface

11. LED lights

12. AUX input

13. Source selector

14. Bluetooth pairing

15. Radio presets

16. Volume knob

17. Line Out

18. Mic / Guitar Input

19. Mic / Guitar Gain & Echo Controll

GETTING STARTED

Wall Outlet

• Press Battery Level button on side panel

to check current battery charge

• Turn the Power switch to ON.

• The LED battery indicator will turn on.

• The unit will enter Bluetooth pairing mode

(LED will flash blue).

• If 3.5mm AUX cable is plugged in, unit will

automatically enter AUX mode.

( )

Rating Current:7A

ONLYWORK

WITH WALL POWER

840W(COMBINED)

FCC ID:2AAINBL-1100BT

Manual Bluetooth pairing

• Place speaker and Bluetooth device within 3

feet of each other.

• Make sure Bluetooth function is enabled on your

device.

• Press and hold Bluetooth button for 2 seconds

to enter pairing mode. BLUE LED will flash.

• Search for Bluetooth connections on

your device. Select “MONSTER RRPRO”

BLUETOOTH CONNECTION

SOURCE

USB

SOURCE

EZ-PLY

MIC

Guitar

GAIN ECHO

USB

BASS

TREBLE

1 2 3

4 5 6

EZ-PLY

AUX

• Speaker will confirm connection with

audible sound.

• Once paired, BLUE LED will stop flashing

and remain steady.

BLUE LED Indicator

(Flashing to Steady)

NFC CONNECTION

• Turn the speaker on to Bluetooth pairing mode by pressing

and holding to enter into Bluetooth pairing mode.

• Activate Bluetooth on your NFC Compatible

mobile device

• Tap your mobile device onto the NFC logo

of the speaker

• Bluetooth Blue LED Indicator turns solid upon pairing

CHARGING BATTERY

• Connect speaker to AC outlet via AC power input

to charge battery.

▪ Full charge in 7 hours while powered OFF.

▪ Full charge in 15 hours while powered ON.

• 3 GREEN LED indicates full battery charge.

• Flashing RED LED indicates that the battery

level is low.

• NOTE: Before first use, charge unit for ~6 hours.

AUX INPUT

WIRELESS MICROPHONE

• Make sure batteries are properly installed into the microphone.

• Switch microphone button to ON. LED light will flash RED once.

• BLUE LED on the side of the speaker

(next to battery life LED) will light up when connected.

• Turn red-tipped GAIN and ECHO dials to tune wireless microphone.

• Plug in the 6.3 mm audio jack plug in the MIC input for Microphone, GUITAR input for guitar,

the unit will enter into that mode (MIC / GUITAR), make sure the the Microphone, Guitar, or

other device is on.

• You can connect any audio device that has 6.3 mm audio

output jack, and can playback and audio from this

connected device.

• Playback functions (Play, Pause, Next, Previous) can

be controlled from the connected Audio device.

• Plug in the 3.5 mm Stereo Audio wire into the AUX-IN

input, and the unit will enter into AUX mode and t

BT Blue LED indicator will turn off..

• You can connect any audio device that has 3.5mm

audio output jack, and can playback any audio from

this connected device.

6.3 MM GUITAR / MIC INPUT

FM RADIO

AUTO STANDBY

When entering standby, the RED LED Power signal will turn on, and all other LED lights will turn off.

• Bluetooth: Standby mode enables when there is no BT connection, when it has been

disconnected for 15 minutes, or if there is a connection failure.

• AUX: Standby mode enables when the speaker is in AUX mode and does not detect

an AUX cable.

• Work: Standby mode enables in work mode by pressing and holding volume knob

for 3 seconds.

“Wake up” from standby mode:

If the main unitisin Standbymode,press and hold the volume knob for 1 second. The main unitwill turn on and

return tothe latest source mode. The Power Red LED Signal will turn off and the LED Screen will display the

latest source once the main unit is in work mode.

SOURCE

USB

Listening to FM radio

• Press the “Source” button to select.

FM source, the radio station frequency will be

displayed on the screen

• Press and hold ( or ) to search a station.

with the strongest reception.

Store your favorite six radio stations manually

• Tune to the desired radio station.

• Press and hold a number key (1-6) to enter programming mode; The corresponding number blinks

on the screen; enter the stations to save on the selected preset.

• Repeat above step 1-2 to store additional stations.

Store a favorite radio station

• Press the “Source” button to select FM source.

• Press the number 1-6 keys to select one of your favorite radio stations to listen.

USB CHARGING

• With the built in USB power back, connect your USB

cable to one of the two USB power ports. You can

connect an iPhone, iPad, or any Android device.

(USB cable not included)

EQUALIZER (EQ) PRESETS

Customize your

listening experience

with 6 EQ settings when

in Bluetooth or AUX mode.

SOURCE

1 2 3

4 5 6

• Make sure AC power cord is fully inserted into the unit and the electrical outlet,

• Make sure Power switch is turned to the ON position.

• If battery is flat, plug AC power cord into electrical outlet to charge.

TROUBLESHOOTING

General

No power

• Bluetooth cottnnection may be poor, move Bluetooth device closer to the unit.

Bluetooth Operations

Poor Audio Quality

• Make sure the unit is not paired to another Bluetooth device.

• Make sure the unit’s Bluetooth is switched to ON.

• Make sure the unit is in pairing mode (BLUE LED flashing).

• Turn Power switch to OFF, then back to ON. Press and hold BT button for 2 seconds to

enter pairing mode.

Cannot Pair to Device

• Turn Power switch to OFF, then back to ON to reset the unit.

• Unplug the AC power cord and plug it back in.

No Button/Key Resonce

• Make sure AUX/Bluetooth-connected device volume is turned up.

• Make sure Bluetooth-connected device is playing audio through BT.

No Music Playing

TWS

TWS CONNECTION

• Make sure the speaker is in Bluetooth mode and

connect to a device.

• Press the TWS button to activate the speaker’s

True Wireless Stereo

(RED LED indicator will flash in TWS mode)

• On a second speaker (NOT connected to a

Bluetooth device), press the TWS button.

• When speakers connect, the RED LED indicator will stop flashing and remain on.

• To disconnect a speaker, press the TWS button.

SPECIFICATIONS

Input Source Bluetooth / FM / AUX

Control Buttons Power, Source, Bluetooth, Volume, Previous / Next, LED lighting, 6 FM

preset keys, Battery level LED indicator, TWS, Bass / Treble

Power Input AC IN 120V/60H z/AC IN 220V/50HZ

Auto Standby When the unit is not being used for over 15 minutes it will automatically

enter standby mode (BT and AUX mode only)

Auto Power Off Yes

Speaker Driver Size 80W x 1

Full Range 8” (woofer) + 3” (full range)

Max SPL 99dB

THD + Noise <10%

S/N >75dB

Cabinet Material Plastic

Dimensions (W x H x D) 16.7” x 20.6” 9.05”

Weight (Kg) 21 lbs

Operating Temperature Range 32F° - 104F°

Operating Humidity Range 40~90% RH

Storage Temperature Range -13F° to 158F°

Bluetooth Version 4.2 + EDR

A2DP, AVRCP

Bluetooth Frequency Brand 2.4GHz ~ 2.48GHz

Bluetooth Range 10m (33ft.)

Power On / Off Key Power On: Switch “Power” key to “I”

Power Off: Switch “Power” ket to “O”

Source Key Press source key to change source between “BT”, “AUX IN”. or “FM”

Volume Knob 1. Rotate VOLUME knob to increase / devrease volume.

2. Press and hold the VOLUME knob for 3s and enter standby status.

Bluetooth Paring

1. Press and hold the PAIRING key for 2s to enter pairing mode.

2. Press and hold the PAIRING key for 8s to clear any previous Bluetooth

paring.

Previous / Next Key Auto search radio stations when in FM mode press and hold “Previous /

Next” key in FM source

Preset 1,2,3,4,5,6 1. Short press - play preset station

1. Long press - store current station to preset

Battery Level Press button to activate LED display

3.5mm AUX In x 1

USB Port x 2 (5v Parallel 2.A)

AC In x 1

AC Out Yes x 2 (Passthrough)

6.3 mm Line in x 1 10

General

Key

Connections Bluetooth

Operating Temperature

Autres manuels pour ROCKIN ROLLER PRO

Table des matières

Autres manuels Monster Intervenants

Monster

Monster Speaker Mode d’emploi

Monster

Monster Rockin Roller 3 Manuel utilisateur

Monster

Monster Rockin' Roller 4 Manuel utilisateur

Monster

Monster ClarityHD Micro Guide d'installation

Monster

Monster Solara Manuel utilisateur

Monster

Monster turbine pro Manuel utilisateur

Monster

Monster SOLAR X MNSOLX-BLK Manuel utilisateur

Monster

Monster Precision Micro Bluetooth 100 Mode d’emploi

Monster

Monster MROVE-BK Manuel utilisateur

Monster

Monster ClarityHD one Manuel utilisateur

Monster

Monster ClarityHD 100 Mode d’emploi

Monster

Monster SuperStar Mode d’emploi

Monster

Monster ADVENTURER MAX MT-MS22101 Manuel utilisateur

Monster

Monster GLO Manuel utilisateur

Monster

Monster BTW248XBK Manuel utilisateur

Monster

Monster GLO2 Manuel utilisateur

Monster

Monster GLO Manuel utilisateur

Monster

Monster THX SL200-CTR Manuel utilisateur

Monster

Monster KATANA Manuel utilisateur

Monster

Monster PowerNet 200 Manuel utilisateur

Monster

Monster ClarityHD 100 Manuel utilisateur

Monster

Monster Clarity HD 100 Mode d’emploi

Monster

Monster SOLARA MNSOLANZ-BLK Manuel utilisateur

Monster

Monster ClarityHD one Mode d’emploi

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur