Monoprice 43251 Manuel utilisateur

Bluetooth® Headphones with Active Noise Cancelling

P/N 43251

User's Manual

SAFETY WARNINGS AND GUIDELINES

Please read this entire manual before using this device, paying extra attention to these

safety warnings and guidelines. Please keep this manual in a safe place for future reference.

•This device is intended for indoor use only.

•Do not expose this device to water or moisture of any kind.

•Do not expose this device to excessive vibration, extreme force, shock, or

fluctuations in temperature or humidity.

•Do not use this device while operating a motor vehicle, heavy equipment, walking

in traffic, or any other situation in which situational awareness is a key to safety.

•Avoid prolonged exposure to excessive volume levels, which could cause hearing

damage. Reduce the volume to minimum before wearing these headphones, then

increase the volume to a comfortable listening level.

•Do not expose this device to excessively high temperatures. Do not place it in, on,

or near a heat source, such as a fireplace, stove, radiator, etc. Do not leave it in

direct sunlight.

•This device contains a Lithium-ion battery. Dispose of this device only in accordance

with local, state, or federal regulations for electronic waste.

•Charge the battery before first use and at least once every three months to keep it

fresh and capable of holding the full charge.

•Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or

detergents. For stubborn deposits, moisten the cloth with warm water.

•This device has no user serviceable parts. Do not attempt to open, service, or

modify this device.

CUSTOMER SERVICE

The Monoprice Customer Service department is dedicated to ensuring that your ordering,

purchasing, and delivery experience is second to none. If you have any problem with your

order, please give us an opportunity to make it right. You can contact a Monoprice

Customer Service representative through the Live Chat link on our website

www.monoprice.com or via email at sup[email protected]. Check the website for

support times and links.

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the items listed

below. If anything is missing or damaged, please contact Monoprice Customer Service for a

replacement.

1x Bluetooth® Headphones with ANC

1x Micro USB Charging Cable

1x 3.5mm Audio Cable

1x User's Manual

PRODUCT OVERVIEW

1. Multifunction Button (MFB)

2. Volume +

3. Volume -

4. Bluetooth® LED Indicator

5. Micro USB Charging Port

6. Microphone

7. Power Switch

8. ANC LED Indicator

9. 3.5mm Audio Jack

10. ANC Switch

BUTTON OPERATION

Button

Function

Description

Power Switch

Power on

With power off, slide the switch to the ON position.

The voice prompt will say Power On.

If not already paired, the headphones will

automatically enter Bluetooth® pairing mode. The

Bluetooth LED Indicator will flash red and blue

alternately, indicating that it is in Bluetooth pairing

mode.

If already paired and the paired device is within

range, the headphones will reconnect to the device.

Power off

With power on, slide the switch to the OFF position.

The voice prompt will say Power Off.

MFB

Play/pause

Momentarily press to pause or resume audio

playback.

Redial last

phone call

Double press to redial the last phone number called.

Voice dialing

Press and hold for 1 second to enable voice dialing.

Answer a call

When an incoming phone call is received,

momentarily press to answer the call.

Hang up a call

While a call is in progress, momentarily press to

terminate the call.

Reject a call

When an incoming call is received, press and hold for

1 second to reject the call.

Microphone

mute

While a call is in progress, double press to

mute/unmute the microphone.

Volume +

Volume

increase

Momentarily press to increase the volume level.

Next track

Press and hold for 1 second to skip forward to the

next track.

Volume -

Volume

decrease

Momentarily press to decrease the volume level.

Previous track

Press and hold for 1 second to skip back to the

previous track.

ANC On/Off

Switch

ANC on

With the headphones powered off, in Bluetooth

mode, or using a 3.5mm audio connection, slide the

switch to the ON position to turn Active Noise

Cancelling on.

ANC off

With the headphones powered off, in Bluetooth

mode, or using a 3.5mm audio connection, slide the

switch to the OFF position to turn Active Noise

Cancelling off.

LED INDICATIONS

Status

LED Indication

Power on

Bluetooth® LED Indicator flashes blue

twice.

Power off

Bluetooth® LED Indicator flashes red twice.

Bluetooth® pairing mode

Bluetooth® LED Indicator flashes red and

blue alternately.

Connected standby mode / audio playback

/ call in progress

Bluetooth® LED Indicator flashes blue once

every 10 seconds.

Delete pairing record

Bluetooth® LED Indicator flashes red and

blue once at the same time.

Low battery

Bluetooth® LED Indicator flashes red.

Charging

Bluetooth® LED Indicator solid red.

Charging Complete

Bluetooth® LED Indicator solid blue.

ANC on

ANC LED Indicator solid green.

ANC off

ANC LED Indicator off.

CHARGING

The internal battery should be charged before first use and at least once every two months

to keep the battery fresh and capable of holding a full charge.

1. With the headphones powered on, slide the Power Switch to the OFF position.

2. Plug one end of the included Micro USB Charging Cable into the Micro USB

Charging Port on the headphones, then plug the other end into a USB power

source, such as a wall charger, power bank, computer, etc. (available separately).

The Bluetooth® LED Indicator illuminates solid red, indicating that charging is in

progress.

3. When charging is complete, the Bluetooth LED Indicator illuminates solid blue.

Note that if the headphones are powered on when charging begins, they will power off

automatically.

BLUETOOTH PAIRING

1. With the Headphones powered off, slide the Power Switch to the ON position. If

the headphones are not already paired with a mobile device or if the paired device

is off or out of range, the headphones will automatically enter Bluetooth® pairing

mode. The Bluetooth LED Indicator will flash red and blue alternately, indicating

that the headphones are in Bluetooth pairing mode.

Note: If already paired to a mobile device and that device is powered on and within

range, the headphones will automatically reconnect with that mobile device,

instead of entering Bluetooth pairing mode. If you want to pair a different mobile

device, press and hold the MFB, Volume -, and Volume + buttons at the same time

for 5 seconds to delete the pairing record.

2. Ensure that your mobile device is within 3 feet of the headphones. Open the

Bluetooth® settings on your device and scan for nearby Bluetooth connections.

3. Locate and select the MP43251 entry. If prompted for a passcode, enter 0000 (four

zeros). Once connected, the Bluetooth LED Indicator will flash blue once every 10

seconds.

4. If your mobile device supports the AVRCP Bluetooth profile, you can use the

controls on the headphones to answer calls, adjust volume, play/pause playback,

and skip tracks.

MULTIPOINT PAIRING

You can pair a second device for streaming audio to the headphones.

1. Follow the instructions in the

BLUETOOTH PAIRING

section to pair your first device.

2. Open the Bluetooth® settings on your first device and disable Bluetooth.

3. With the headphones powered off, slide the Power Switch to the ON position. The

Bluetooth LED Indicator will flash red and blue alternately, indicating that they are

in Bluetooth pairing mode.

4. Open the Bluetooth® settings on your second device, then scan for nearby

Bluetooth connections.

5. Locate and select the MP43251 entry. If prompted for a passcode, enter 0000 (four

zeros). Once connected, the Bluetooth LED Indicator will flash blue once every 10

seconds.

6. If your second mobile device supports the AVRCP Bluetooth profile, you can use the

controls on the headphones to answer calls, adjust volume, play/pause playback,

and skip tracks.

7. Open the Bluetooth settings on your first device and turn Bluetooth on. The first

device should connect with the headphones.

Note that you can stream audio from only one connected device at a time. If you want to

stream from the second device, you must stop playback on the first device.

Note that the selected audio codec is determined by the codecs supported on the two

devices. The priority order is aptX™ Low Latency, aptX™, AAC, and SBC. If the two devices

do not support the same codecs, the SBC codec will be selected.

WIRED CONNECTION

If your audio device does not have Bluetooth® or if you prefer to not use Bluetooth, you

can plug the headphones directly into the audio output of your device.

1. Plug one end of the included 3.5mm Audio Cable into the 3.5mm Audio Jack on the

headphones, then plug the other end into the headphones jack on your phone or

another 3.5mm audio source.

2. Use the audio playback controls on your connected device to control playback. The

controls on the headphones do not function without a Bluetooth connection.

ACTIVE NOISE CANCELLING (ANC)

The Active Noise Cancelling (ANC) feature can be used when the headphones are off,

during audio playback, and during phone calls. To turn ANC on, slide the ANC Switch to the

ON position. The ANC LED Indicator illuminates green when ANC is on. Note that ANC

should not be used when attention to outside sounds is important.

To turn ANC off, slide the ANC Switch to the OFF position. The ANC LED Indictor turns off

when ANC is off.

TECHNICAL SUPPORT

Monoprice is pleased to provide free, live, online technical support to assist you with any

questions you may have about installation, setup, troubleshooting, or product

recommendations. If you ever need assistance with your new product, please come online

to talk to one of our friendly and knowledgeable Tech Support Associates. Technical

support is available through the online chat button on our website www.monoprice.com

or through email by sending a message to tech@monoprice.com. Check the website for

support times and links.

To download the latest drivers, firmware, manuals, etc., go to www.monoprice.com and

type the P/N into the search bar. If available, support files are linked at the bottom of the

product page.

Table des matières

Autres manuels Monoprice Casque audio

Monoprice

Monoprice BT-205 Manuel utilisateur

Monoprice

Monoprice Entry-Level Amplified Gaming Headset Manuel utilisateur

Monoprice

Monoprice BT-250ANC Manuel utilisateur

Monoprice

Monoprice 42010 Manuel utilisateur

Monoprice

Monoprice BT-300ANC Manuel utilisateur

Monoprice

Monoprice 13893 Manuel utilisateur

Monoprice

Monoprice BT-500ANC Manuel utilisateur

Monoprice

Monoprice 44883 Manuel utilisateur

Monoprice

Monoprice SonicSolace II Manuel utilisateur

Monoprice

Monoprice 43252 Manuel utilisateur

Monoprice

Monoprice 10010 Manuel utilisateur

Monoprice

Monoprice 11178 Manuel utilisateur

Monoprice

Monoprice 10585 Manuel utilisateur

Monoprice

Monoprice BT-600ANC Manuel utilisateur

Monoprice

Monoprice 10245 Manuel utilisateur

Monoprice

Monoprice 43250 Manuel utilisateur

Monoprice

Monoprice TWE-04 Manuel utilisateur

Monoprice

Monoprice SonicSolace 16218 Manuel utilisateur

Monoprice

Monoprice Dual Driver Manuel utilisateur

Monoprice

Monoprice TWE-ANC TrueWireless Manuel utilisateur

Monoprice

Monoprice 27722 Manuel utilisateur

Monoprice

Monoprice 15276 Manuel utilisateur

Monoprice

Monoprice BT-200 Manuel utilisateur

Manuels Casque audio populaires d'autres marques

Sony

Sony MDR-NC8 Manuel utilisateur

AUSounds

AUSounds AU-Stream Manuel utilisateur

ENERGY SISTEM

ENERGY SISTEM Style 7 Manuel utilisateur

Philips

Philips SHE3622 Manuel utilisateur

Insignia

Insignia NS-CAHBTSPORT Manuel utilisateur

Movie Vision

Movie Vision HP-400 Manuel utilisateur

MobiFren

MobiFren SM Pro Manuel utilisateur

Motorola solutions

Motorola solutions PMLN8120 Manuel utilisateur

Jaybird

Jaybird freedom Guide d'installation

Sony

Sony MDR-ED12LP Manuel utilisateur

HiFuture

HiFuture Tidy Buds Pro Manuel utilisateur

Creative

Creative CB2530 Manuel utilisateur

Renkforce

Renkforce RF FTVK-100 Manuel utilisateur

Philips

Philips SHQ3000 Manuel utilisateur

Sennheiser

Sennheiser 500371 Manuel utilisateur

Califone

Califone 2924AV Manuel utilisateur

Philips

Philips EARGEAR HE205 Series Manuel utilisateur

Technics

Technics EAH-AZ80 Manuel utilisateur