MLis MLB-G1103 Manuel utilisateur
MLB-G1103
MLB-G1103
LTE Wireless Terminal
MLB-G1103 LTE Wireless Terminal User Manual 2 Rev 1.1
USER MANUAL
Information provided by Schmidt & Co., (HK) Ltd, (herein known as ‘the company’), is believed to be
accurate and reliable. However, the company assumes no responsibility for its use, nor any
infringement of patents or other rights of third parties, which may result from its use. No license is
granted by implication or otherwise under any patent rights of the company other than for circuitry
embodied in the company’s products. The company reserves the right to change the circuitry and
specifications at any time without notice. This document is subject to change without notice.
No part of this document may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including but not limited to photocopying, recording, transmitting via fax and/or modem
devices, scanning, and/or information storage and retrieval systems for any purpose without the
expressed written consent of the company.
WARNING: The MLiS GSM wireless terminal is a RF product intended for interfacing and operating with
a host device. Local relevant RF regulations such as allowed frequencies and usage in commercial
flights must be observed. Safety instructions must be included in the manuals of the host device.
Schmidt & Co., (HK) Ltd assumes NO liability for customers, who fail to comply with these precautions.
Service and Support
Download Information
http://www.schmidtm2m.com/en/support_download.php
MLB-G1103 LTE Wireless Terminal User Manual 3 Rev 1.1
CONTENTS
1INTRODUCTION ..................................................................................................................................................5
1.1 Description................................................................................................................................................5
1.2 Highlights...................................................................................................................................................5
1.3 Functional Block Diagram .........................................................................................................................9
1.4Precautions ...............................................................................................................................................9
2MECHANICAL DESCRIPTION ............................................................................................................................ 10
2.1 Overview ................................................................................................................................................ 10
2.2 Dimensions............................................................................................................................................. 10
3ELECTRICAL INTERFACE DESCRIPTIONS........................................................................................................... 11
3.1 Right side view (DB9 connector)............................................................................................................ 11
3.2 Left side view (DC Jack & Industry connector)....................................................................................... 12
3.3 Frond view (Antenna & LED).................................................................................................................. 13
3.4 SIM card holder...................................................................................................................................... 14
3.5Din rail mounting ................................................................................................................................... 14
3.6Getting Started....................................................................................................................................... 15
4 SW Installation
5OPERATING NOTE............................................................................................................................................ 34
5.1 Power on the Modem ............................................................................................................................ 34
5.2 Reset to default...................................................................................................................................... 34
5.3 External input x2 .................................................................................................................................... 34
5.4 External Relay x1.................................................................................................................................... 34
5.5 DB9 Connector ....................................................................................................................................... 34
5.6 Install SIM card....................................................................................................................................... 34
6MLiS Cellular Control Protocol (MCCP) ........................................................................................................... 35
MLB-G1103 LTE Wireless Terminal User Manual 4 Rev 1.1
7 SALES CONTACT ................................................................................................................................................. 41
8ORDERING INFORMATION................................................................................................................................ 42
List of Figures
Figure 1-1: Functional Block Diagram for MLB-G1103 ...................................................................................9
List of Tables
Table 1: Operating Modes………………………………………………………………………………………………………………………………….12
Table 2: Features and Specifications…………………………………………………………………………………………………………………..12
Table 3: Chassis Dimensions and Mechanical Description for MLB-G1103 ............................................................ 10
Table 4: DB9 pins define for MLB-G1103 ................................................................................................................ 11
Table 5: Interfaces and Indicators Description of MLB-G1103 ............................................................................... 12
Table 6: LED functions of MLB-G1103..................................................................................................................... 13
Table 7: Operation Modes for different transmission rates comparison
MLB-G1103 LTE Wireless Terminal User Manual 5 Rev 1.1
1 INTRODUCTION
1.1 Description
The MLiS MLB-G1103 is a LTE wireless terminal. It is designed for RS232/RS422/RS485 communication
over TCP/IP via any readily available LTE carrier network. Overall, they are more cost and time effective
to use remote solutions to combine Machine to Machine over diverse locations without having first to
establish and invest in a huge complex network.
The MLB-G1103 wireless terminal series use the DB9 Connector to provide data communication
interface and the DC jack to provide power input. LEDs are used to indicate the status of the wireless
terminal.
The MLB-G1103 wireless terminal can be used to provide a wireless communication link to many
applications, including metering, fleet and asset management, vending, security and alarm monitoring,
e-maintenance and other telemetry applications.
1.2 Highlights
Interface
DC jack connector for power / Terminal Block for power
DB9 connector (male)
SMA Female Connector (GSM antenna connector)
SIM card reader
1 * Relay
2 * DIs
MLB-G1103 LTE Wireless Terminal User Manual 6 Rev 1.1
General Features
General Features
Frequency Range
MLB-G1103-EU:
LTE: Penta band 700 (Bd28) / 800 (Bd20) / 900 (Bd8) / 1800 (Bd3)
/2100 MHz (Bd1)
UMTS/HSPA+: Dual band 900 (BdVIII) / 2100MHz (BdI)
GSM/GPRS/EDGE: Dual band 900/1800MHz
Protocol Stack
TCP/UDP/FTP/HTP/SMTP
Power Supply Input
5~42VDC
Power Consumption
Working Mode : 102 mA @12V
Standby Mode : 29 mA @12V
Humidity
5~95% (non-condensing).
Operating Temperature
-40~+75°C
Switch Off Protection
+90°C
Dimension
(L) x (W) x (H)
119.5 x 89 x 26.9mm
(excluding connectors)
Weight
200g (without antenna)
Casing Material
Metal
Data Transmission
LTE
UE CAT 1 supported
DL 10.2Mbps, UL 5.2Mbps
HSPA+
DL 7.2Mbps, UL 5.7Mbps
HSDPA Cat.8 / HSUPA Cat.6 data rates
Compressed mode (CM) supported according to 3GPP TS25.212
GPRS/EGPRS
GPRS:
•Multislot Class 12
•Full PBCCH support
•Mobile Station Class B
EGPRS:
•Multislot Class 12
•EDGE E2 power class for 8 PSK
•SRB loopback and test mode B
•PBCCH support
•Mobile Station Class B
SMS
MT, MO, Cell broadcast, Text and PDU mode
Operating Mode
Transparent (TCP server/TCP client/UDP)
TCP server/TCP client/UDP
MLB-G1103 LTE Wireless Terminal User Manual 7 Rev 1.1
SMS/AT command
Serial Mode
RS-232/422/485
Serial Parameter
Data Bits: 7, 8
Stop Bits: 1, 2
Parity: None, Even, Odd
Flow Control: RTS/CTS, DTR/DSR
Baud Rate: 1200 - 921600 selectable
Serial Signals: TxD, RxD, RTS, CTS, DTR,
DSR, DCD, RST (reset circuit), GND
Relay
1 output with current carrying capacity of 2A @40VDC
Digital Inputs
2 electrically isolated inputs:
+13~+30V for state “1” (on)
+3~-30V for state “0” (off)
ESD Protection
15 KV
Heart Beat Packet
Yes
ID with Packet
Yes (15 Bytes MAX.)
Data Buffering
128KB
Data Delimiter
Yes
Event Trigger
GPRS/Reboot/IO/Relay
MCCP/MCCU
Yes
API: MLiS Cellular Control Protocol (MCCP)
Utility: MLiS Cellular Configuration Utility (MCCU)
Interfaces
RF Antenna Socket
50 Ohm SMA
Power Connector
DC jack connector / Terminal Block for power
SIM Card Num.
1
SIM Card Slot
Flip-up type
Serial Interface
DB9 connector (male)
LED
6 x Working Status Indicator
3 x Network Status Indicator
Reset
HW Reset
Approval
Certification
EMC
EN55032/35
MLB-G1103 LTE Wireless Terminal User Manual 8 Rev 1.1
RF
EN301489-1
EN301489-52
EN62311
Safety
LVD 60950-1
NCC
PLMN10
CNS13438
CNS13438
CNS14336-1
MLB-G1103 LTE Wireless Terminal User Manual 9 Rev 1.1
Functional Block Diagram
Figure 1-1: Functional Block Diagram for MLB-G1103
The MLB-G1103 series consist of a fully certified (CE /NCC approved) GSM/GPRS engine, SIM card
holder and power regulator.
The wireless terminal is supplied with power via the DC jack. The remaining DB9 connector is used for
data communications.
The SMA female connector provides the air interface to an external 50 ohm antenna specified for the
correct frequency band.
1.3 Precautions
The MLB-G1103 wireless terminals are designed for indoor use only. For outdoor uses it has to be
integrated into a weatherproof enclosure. Do not exceed the environmental and electrical limits as
specified in the user manual.
DB9
MLB-G1103 LTE Wireless Terminal User Manual 10 Rev 1.1
2MECHANICAL DESCRIPTION
2.1 Overview
The pictures below show the mechanical design of the wireless terminal along with the positions of the
different connectors.
2.2 Dimensions
Figure 2: Chassis Dimension for MLB-G1103
S/N
Parameter
Value
1
Height (H)
26.9mm
2
Length (L)
119.5mm
3
Width (W)
89.0mm
4
Weight
200g
5
Chassis Material
Metal
Table 1: Chassis Dimensions and Mechanical Description for MLB-G1103
Table des matières
Autres manuels MLis Terminal tactile
Manuels Terminal tactile populaires d'autres marques
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Manuel utilisateur
Ingenico
Ingenico AXIUM EX4000 Manuel utilisateur
Heisei Electronics
Heisei Electronics Q-POS 815 Manuel utilisateur
Amano
Amano MTX-15 Manuel utilisateur
FLOWBIRD
FLOWBIRD CWT Compact Touch Manuel utilisateur
Demco
Demco SP7 Manuel utilisateur
