Mistral AM437x Manuel utilisateur
www.mistralsolutions.com/pom
AM437x Product on Module(PoM)
Quick Start Guide
Congratulations on the purchase of the AM437x PoM
Welcome to the AM437x Product on Module (PoM) Quick Start Guide. This guide demonstrates
booting Android on the PoM board.
This Document helps you experience the Android KitKat (4.4.4) release that showcases the power
of the AM437x Cortex®-A9 processor, 3D graphics and more on the AM437x PoM.
Android binaries for the PoM board can be downloaded from here: www.mistralsolutions.com/
am437xpom/android-binary
Linux demo binaries for the AM437x PoM board can be downloaded here:
www.mistralsolutions.com/am437xpom/linux-demo
The AM437x PoM contains the following:
Hardware
>Sitara™ AM437x Cortex-A9 processor
>TPS65218 power management IC
>1GB DDR3
>4GB eMMC
>Audio input and output
>Expansion headers for Ethernet, I2C, SPI,
ADC, PWM, UART, GPIO
>LCD, CAM, MMC, CAN, McASP
PrintersSPI
>One USB 2.0 OTG
>One USB 2.0 HOST
>WiFi+BT module with Antenna
>2 X Gigabit Ethernet
>8/10 bit camera interface
>Power Supply
Accessories
Front View Rear View
Default setup (OS boot from microSD card)
Connect the Ethernet cable to the RJ-
45 jack located on the AM437x PoM.
Connect the other end of the cable to
an Internet-enabled Router or Ethernet
switch.
3
Insert the Micro-SD Card into the
SD card slot of the AM437x PoM as
shown above. The Micro-SD Card Slot is
located below the Camera module on
the PoM. The SD Card needs to be
inserted with the sticker facing up.
Micro- Connect the HDMI Cable to the
AM437X PoM and the other end to an
HDMI Monitor. Please ensure that the
HDMI Monitor is powered separately
through its power cable.
12
4Connect the power cable to the jack as
shown and plug into an AC power
source
Note: When powering the PoM always
use the supplied power supply or
equivalent model having output voltage
of +5V DC and max output current of
3.0 Amp.
You are now ready to explore the
various demos and applications
available on the AM437x PoM!
8
Important Notice: The products and services of
Mistral Solutions and its subsidiaries described here
in are sold subject to Mistral Solutions’ standard
terms and conditions of sale. Customers are advised
to obtain the most current and complete information
about Mistral products and services before placing
orders. Mistral Solutions assumes no liability for
applications assistance, customer’s applications or
product designs, software performance, or
infringement of patents. The publication of
information regarding any other company’s products
or services does not constitute Mistral Solutions’
approval, warranty or endorsement thereof.
Click on the Menu Bar and select the
settings option. This will open the
settings screen as shown above.
7
Please visit: http://www.mistralsolutions.com/pom
For support questions, please contact: [email protected]
Provide feedback: Take this survey and tell us about your experience
using the AM437x PoM
www.mistralsolutions.com/pom/survey
©Mistral Solutions Private Limited
While the board is booting Linux and an
Android Kitkat, plug the USB Mouse to
the USB Host Port.
5Wait for the Android to boot completely.
Once the Android main screen appears,
unlock the screen by dragging the USB
Mouse over the Screen Lock Icon.
6
Autres manuels Mistral Carte mère
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
