Mircom BBX-2000 Manuel utilisateur

Page 1 of 2 LT-6010 Rev 1 June 2010

BBX-2000

Integrated Fire/Audio Cabinet

Mechanical Installation

The Integrated Fire/Audio Cabinet is the network fire alarm and audio floor or node panel. It is mounted into the BBX-

2000 backbox and door. Mount the backbox onto the wall using six #8 screws to secure the backbox to the wall. The

backbox is surface mounted only; the dimensions for the mounting holes are shown in Figure 1 below. The

Integrated Fire/Audio Cabinet consists of the Audio Card Cage, FX-2000ND Deep Chassis with FX-2000N Main

Control board/2 Amp Battery Charger, and PS-2040 10 Amp Fire Alarm/30 Amp Audio Power Supply. Batteries are

mounted in the tray located at the bottom of the enclosure.

Figure 1: BBX-2000 Enclosure with the Integrated Fire and Audio System

16.5”

25”

33.5”

BBX-2000 Enclosure

QMB-5000N Audio Card Cage

FX-2000ND Main Chassis with

provision to mount FNC-2000

Network Controller Module and

2 adder modules/loop controllers

PS-2040 Power Supply and space

to mount 6 adder modules/

loop controllers

Batteries (maximum 40 AH)

Metal plate with ANC-5000 and

TNC-5000 modules aboard fit

into position 1 of the QMB-

5000N Audio Card Cage

QAA Amplifiers fit

into slot positions 2,

3, 4 and 5.

Page 2 of 2 LT-6010 Rev 1 June 2010

Each part has to be mounted into the backbox by the user. The QMB-5000N Audio Card Cage is mounted in the top

left side of the backbox over the four studs with the #8 Hex nuts provided. The FX-2000ND Main Chassis is

mounted below the audio card cage over the four studs provided using four #8 Hex nuts. The PS-2040 power

supply is mounted under the main chassis with #10 Hex nuts, the power supply cover is mounted over the torroid

and over the two studs using the #6 hex nuts and the batteries are placed on the battery tray which comes mounted

at the bottom of the backbox. Refer to Figures 1 and 2.

Figure 2: Perspective View of BBX-2000 Enclosure with Fire and Audio System

Table des matières

Autres manuels Mircom Unité de contrôle

Mircom

Mircom RB-MD-1113 Manuel utilisateur

Mircom

Mircom MIX-M500MAP Manuel utilisateur

Mircom

Mircom TX3-MDM Manuel utilisateur

Mircom

Mircom QIF-2011 Manuel utilisateur

Mircom

Mircom RB-MD-950 Mode d’emploi

Mircom

Mircom QMP-5100AX Manuel utilisateur

Mircom

Mircom QDV-1000 Manuel utilisateur

Mircom

Mircom RAX-332 Manuel utilisateur

Mircom

Mircom RB-MD-750 Manuel utilisateur

Mircom

Mircom MIX-100R Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur