MikroTik RB750Gr3 Manuel utilisateur

hEX

hEX is a powerful five port Gigabit Ethernet router for locations where wireless connectivity is not required.

First use

1. Choose your powering solution, please see Powering section for possibilities.

2. Connect your nternet cable to port 1 (labeled “ nternet”), and local network computers to ports 2-5.

3. Connect your direct input power jack if not using POE, to start up the device.

4. f using POE please see section POE Adapter on how to connect.

5. The device will boot up and after short beep, the network will be available for connecting.

6. Set your computer P configuration to automatic (DHCP).

7. Once connected to the network, open http://192.168.88.1 in your web browser to start configuration, since

there is no password by default, you will be logged in automatically.

8. We recommend clicking the “Check for updates” button and updating your RouterOS software to the latest

version to ensure the best performance and stability.

9. Set up your password in the screen that loads.

Mounting

This device is designed for use indoors by placing it on the flat surface or mounting on the wall, mounting points are

shown on the picture below, screws are not included in the package. Screws with size 4x25 mm fit nicely,

depending on your wall structure you can use dowels 6x30 mm and 6 mm drill bit if needed.

When mounting on the wall, please ensure that cable feed is pointing downwards. We recommend using Cat6

cable for our devices. The P rating scale for this device is PX0.

See mikrotik.com/products for the latest version of this document. Document #49563 Modified on: 01.OKT.2019

Powering

The device accepts power from the power jack or from the first Ethernet port (Passive PoE):

•Direct input power jack (5.5mm outside and 2mm inside, female, pin positive) accepts 8-30 V ⎓DC.

•The first Ethernet port accepts passive Power over Ethernet 8-30 V ⎓DC. 12 V or more is recommended to

compensate for the loss in cables.

The power consumption of this device under maximum load with attachments is 10 W. Without attachments 5 W.

Booting process

RouterOS includes many configuration options in addition to what is described in this document. We suggest

starting here to get yourself accustomed to the possibilities: http://mt.lv/help. n case P connection is not available,

the Winbox tool (http://mt.lv/winbox) can be used to connect to the MAC address of the device from the LAN side

(all access is blocked from the nternet port by default).

For recovery purposes, it is possible to boot the device from the network, see a section Reset button .

Extension Slots and Ports

•The device has five individual Ethernet ports, supporting automatic cross/straight cable correction (Auto

MD /X), so you can use either straight or cross-over cables for connecting to other network devices.

•MicroSD card slot.

•USB type A slot.

Buttons and jumpers

Reset button

The RouterBOOT reset button has the following functions. Press the button and apply the power, then:

•Release the button when a green LED starts flashing, to reset RouterOS configuration to defaults.

•Release the button when the LED turns solid green to clear all configuration and bridge all interfaces.

•Release the button after LED is no longer lit (~20 seconds) to cause a device to look for Netinstall servers

(required for reinstalling RouterOS over the network).

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed

before power is applied to the device. Useful for RouterBOOT debugging and recovery.

Mode button

The action of the mode buttons can be configured from RouterOS software to execute any user-supplied RouterOS

script. You can also disable this button.

The mode button can be configured in RouterOS menu /system routerboard mode-button

Connecting to a POE dapter:

1. Connect the Ethernet cable from the device to the POE port of the POE adapter.

2. Connect an Ethernet cable from your LAN to the LAN port of the POE adapter, please mind arrows for data

and power flow.

3. Connect the power cord to the adapter, and then plug the power cord into a power outlet.

See mikrotik.com/products for the latest version of this document. Document #49563 Modified on: 01.OKT.2019

ccessories

Package includes the following accessories that come with the device:

•DC EU/US Switching Power Supply 24 V, 0.38 A, 9 W, Level V , cable:1.5 m.⎓

Specifications

For more information about this product, specification and pictures please visit our web page:

https://mikrotik.com/product/RB750Gr3

Operating System Support

The device supports RouterOS software version 6. The specific factory installed version number is indicated in the

RouterOS menu /system resource. Other operating systems have not been tested.

See mikrotik.com/products for the latest version of this document. Document #49563 Modified on: 01.OKT.2019

Table des matières

Autres manuels MikroTik Routeur réseau

MikroTik

MikroTik 912UAG Series Manuel utilisateur

MikroTik

MikroTik RouterBOARD Metal 5SHPN Manuel utilisateur

MikroTik

MikroTik RouterBOARD RB2011UAS-IN Manuel utilisateur

MikroTik

MikroTik RB711UA-5HND Manuel utilisateur

MikroTik

MikroTik SXT Lite5 ac Manuel utilisateur

MikroTik

MikroTik CCR1016-12G Manuel utilisateur

MikroTik

MikroTik L41G-2axD Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

MikroTik

MikroTik CRS504 Manuel utilisateur

MikroTik

MikroTik RBQRTG-2SHPnD Manuel utilisateur

MikroTik

MikroTik RouterBOARD 711UA-5HnD Manuel utilisateur

MikroTik

MikroTik CRS328-4C-20S-4S+RM Manuel utilisateur

MikroTik

MikroTik hEX Manuel utilisateur

MikroTik

MikroTik CRS510-8XS-2XQ-IN Manuel utilisateur

MikroTik

MikroTik LHG XL 5 ac Manuel utilisateur

MikroTik

MikroTik RouterBOARD Series Manuel utilisateur

MikroTik

MikroTik RouterBOARD 1100 Manuel utilisateur

MikroTik

MikroTik RB2011iL-RM Manuel utilisateur

MikroTik

MikroTik Cloud Core Router 1072-1G-8S+ Manuel utilisateur

MikroTik

MikroTik BaseBox 5 Manuel utilisateur

MikroTik

MikroTik RouterBOARD 751U-2HnD Manuel utilisateur

MikroTik

MikroTik RouterBOARD BaseBox Series Manuel utilisateur

MikroTik

MikroTik RB2011iL-IN Manuel

MikroTik

MikroTik RB5009UPr+S+IN Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité

LevelOne

LevelOne FBR-1416 Manuel utilisateur