Midea YL2036S Manuel utilisateur
Warning notices: Before using this product, please read this manual carefully and keep it for future reference.
The design and specifications are subject to change without prior notice for product improvement.
Consult with your dealer or manufacturer for details.
The diagram aboveis just for reference. Please take the appearance of the actual product as the standard.
YL2036S
USER MANUAL
Water Dispenser
THANK YOU LETTER
Thank you for choosing Midea! Before using your new Midea product, please read
this manual thoroughly to ensure that you know how to operate the features and
functions that your new appliance oers in a safe way.
CONTENTS
0
02
1
01
21
31
41
51
61
05
06
THANK YOU LETTER
SAFETY INSTRUCTIONS
SPECIFICATIONS
PRODUCT OVERVIEW
PRODUCT INSTALLATION
OPERATION INSTRUCTIONS
CLEANING AND MAINTENANCE
TROUBLESHOOTING
TRADEMARKS, COPYRIGHTS AND LEGAL STATEMENT
DISPOSAL AND RECYCLING
DATA PROTECTION NOTICE
08
Danger
This symbol indicates that there are dangers to the life and health of
persons due to extremely flammable gas.
Warning of electrical voltage
This symbol indicates that there is a danger to life and health of
persons due to voltage.
Warning
The signal word indicates a hazard with a medium level of risk which, if
not avoided, may result in death or serious injury.
Caution
The signal word indicates a hazard with a low degree of risk which, if
not avoided, may result in minor or moderate injury.
Attention
The signal word indicates important information (e.g. damage to
property), but not danger.
Observe instructions
This symbol indicates that a service technician should only operate and
maintain this appliance in accordance with the operating instructions.
The following safety guidelines are intended to prevent unforeseen risks or damage from
unsafe or incorrect operation of the appliance. Please check the packaging and appliance
on arrival to make sure everything is intact to ensure safe operation. If you find any
damage, please contact the retailer or dealer. Please note modifications or alterations to
the appliance are not allowed for your safety concern. Unintended use may cause
hazards and loss of warranty claims.
Read these operating instructions carefully and attentively before using/commissioning the
unit and keep them in the immediate vicinity of the installation site or unit for later use!
Intended Use
Explanation of Symbols
SAFETY INSTRUCTIONS
02
03
DANGER: Risk of Fire/Flammable materials
●
●
●
Do not use an extension cord with your water dispenser.
Do NOT operate dispenser in the presence of explosive fumes.
Use only properly grounded outlets.
Always grasp plug and pull straight out from outlet. Never unplug by pulling on
power cord.
Do NOT use dispenser if cord becomes frayed or otherwise damaged.
To protect against electric shock, do NOT immerse cord, plug, or any other part of
dispenser in water or other liquids.
Ensure dispenser is unplugged prior to cleaning.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
It is recommended to use bottled pure water. If you use hard water, may lead to hot
pot furring or detonation tank or pipeline risk. If you need cleaning tube, remove
scale, need to find a professional institutions and professional operation.
WARNING: When positioning the appliance, ensure the supply cord is not trapped
or damaged.
WARNING: Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the appliance.
WARNING
●
●
●
●
●
●
●
CAUTION: Risk of injury!
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Never allow children to dispense hot water without proper and direct supervision.
Unplug unit to prevent unsupervised use by children.
Failure to comply with the safety information and instructions may result in injury.
Safety of children and persons with reduced abilities.
This appliance is intended to be used in household and similar applications such as:
sta kitchen areas in shops, oces and other working environments; farm houses and
by clients in hotels, motels and other residential type environments; bed and breakfast
type environments; catering and similar non-retail applications.
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the defrost-
ing process, other than those recommended by the manufacturer.
This appliance is not suitable for installation in an area where a water jet could be
used.
SAFETY INSTRUCTIONS
04
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
SAFETY INSTRUCTIONS
Do not store explosive substances such as aerosol cans with a flammable propellant in
this appliance.
The appliance must not be immersed.
The appliance must not be cleaned by a water jet.
The appliance is suitable for indoor use only.
This appliance should work under environment of temp from 10℃~43℃.
Never turn the machine upside down or lean it more than 45°.
Thermostat has be adjusted. No need to adjust it by yourself. When the machine is
under the ice point and blocked by ice, the cooling switch must be closed for 4 hours
before turning it on again to continue its operation.
This machine should not be turned on until 3 minutes later after turning o the power
switch.
Prior to use, this dispenser must be properly assembled and installed in accordance
with this manual.
This dispenser is intended for water dispensing only. Do NOT use other liquids. Do
NOT use for other purposes. Never use any other liquid in the dispenser other than
known and microbiologically safe bottled water.
For indoor use only. Keep water dispenser in a dry place away from direct sunlight.
Do NOT use outdoors.
Install and use only on a hard, flat and level surface.
Do NOT place dispenser into an enclosed space or cabinet.
Position back of dispenser no closer than 20cm from wall and permit free airflow
between wall and dispenser. There must be at least 20cm clearance on the sides of
the dispenser to permit airflow.
Warning: Do not damage the refrigerant circuit.
Service should be performed only by a certified technician.
This product is not recommended at an altitude of 1500 meters above the region to
use.
In order to make sure the machine can be used normally, please keep it stand still for
24 hours before powering up.
SPECIFICATIONS
05
YL2036SProduct Model
Rated Voltage
Rated Frequency
220-240V~
50/60Hz
420W
1.0A
4L/h(≥85°C)
4L/h(≤10°C)
Rated power
Heating power
Cooling current
Hot water capacity
Cold water capacity
REFRIGERANT
520W
R134a(32g)
06
Product
PRODUCT OVERVIEW
Heating switch
Cooling switch
Round Indicator
Light Switch
Power supply
cord
Outlet of hot
water
Condenser
Top cover
Button of hot water
Button of normal water
Button of cold water
Indicator Lights
Faucet
Water collector
Door
Accessories
PRODUCT OVERVIEW
07
Fixed block x1
Instruction Manual x1 Warranty Card x1 Anchor bolt x1
Screw x2
PRODUCTINSTALLATION
Getting Started
Locate Dispenser
1. Place dispenser upright.
2.Locate dispenser on a hard and level surface in a cool shaded location near a grounded
wall outlet.
Note: Do not plug in power cord yet.
3.Position dispenser with at least 20cm from wall and at least 20cm on both sides.
Assemble
1.Remove drip tray from door and place the grid on top.
2.Snap drip tray and grid assembly into door.
Install Water Bottle
1.Open dispenser door.
2.Place probe assembly on probe hanger.
3.Place fresh bottle outside of cabinet.
4.Remove entire plastic cap from top of bottle.
5.Clean outside of new bottle with a cloth.
6.Place probe into bottle.
7.Slide collar down until it clicks in place.
8.Push head down until tubes hit bottom of bottle.
9.Slide bottle into cabinet and close door.
Provide Electricity
Plug cord into a properly grounded wall outlet.At this time the pump will begin to move
water from the bottle to the hot and cold tanks. It will take up to 5 minutes to fill the
tanks for the first time. During this period the pump will run continuously. This is normal.
Activate Heating & Cooling
Notice: This unit will not dispense hot or cold water until the switches are activated.
To activate, push top side of power switches in to start heating and coolingwater.
If you do not want to heat water, push bottom side of red switch in.
If you do not want to cool water, push bottom side of green switch in.
Activate Nightlight
Push top side of blue power switch in to turn light on. Push bottom side in to turn light
o.
3 Gallon Bottle5 Gallon Bottle
Head
Collar Head
Collar
08
PRODUCTINSTALLATION
Machine Installation
To prevent the machine from swaying to fall, please install
the bracket accordingly.
1-2. Loosen the screw of the left or right bottom angle just
as the picture shown.
3. Use the screw to fix the bracket on the left or right
bottom angle of the water dispenser.
4. Make a hole on the floor's or the desk's surface where
the water dispenser will be installed.
5. Fix the bracket on the floor by screw tightly.
6. Tighten the screw.
WARNING! To avoid a hazard due to instability of the appliance, it must be fixed in
accordance with the instructions.
09
Water dispenser
Bracket
The hole for
tighten screw
2 3 5 641
Table des matières
Autres manuels Midea Distributeur d'eau
Midea
Midea YD1539T Manuel utilisateur
Midea
Midea YLD1932S Manuel utilisateur
Midea
Midea YL1635T Manuel utilisateur
Midea
Midea YL1536S Manuel utilisateur
Midea
Midea MYD718S-X Manuel utilisateur
Midea
Midea YL1131AS Manuel utilisateur
Midea
Midea YL2037S-B Manuel utilisateur
Midea
Midea MYD10S-W Manuel utilisateur
Midea
Midea YL1335S-W Manuel utilisateur
Midea
Midea MJR001T Manuel utilisateur
