Microtronics MyDatalogNANO Ex Manuel utilisateur

User manual for the portable ATEX data logger

myDatalogNANO Ex

Rev. 01 valid from:

lFirmware version: 03v006

lModem version: 03v004

lServer version: 40.1

lHardware version: 2.0

User manual

300489

Microtronics Engineering GmbH | www.microtronics.at

Hauptstrasse 7 | 3244 Ruprechtshofen | Austria

Tel +43 2756 77180 23 | Fax +43 2756 77180 33 | support@microtronics.at

Chapter 1 Table of contents
Chapter 1 Table of contents
User manual for the portable ATEX data logger myDatalogNANO Ex 1
Chapter 1 Table of contents 3
Chapter 2 Declaration of conformity 9
2.1 Declaration of conformity - Appendix 10
Chapter 3 Technical data 13
Chapter 4 General specifications 15
4.1 Translation 15
4.2 Copyright 15
4.3 General descriptive names 15
4.4 Ex protection 16
4.5 Safety instructions 17
4.5.1 Use of the hazard warnings 17
4.5.2 General safety instructions 17
4.5.3 Safety and preventative measures for handling GSM/GPRS modems 18
4.5.3.1 Safety and precautionary measures for the installation of the GSM/GPRS modem
18
4.5.3.2 Safety measures for installing the antenna 18
4.6 Overview 19
4.6.1 Block diagram 20
4.7 Intended use 20
4.8 General product information 21
4.9 Device labelling 21
4.10 Installation of replacement and wear parts 22
4.11 Storage of the product 22
4.12 Obligation of the operator 23
Chapter 5 Functional principle 25
5.1 Internal processing of the measurement values 27
5.1.1 Filter module 27
Rev. 01 3

1.2 Overflow module 28
1.3 Scale module 28
1.4 Decay module 28
1.5 Hold module 29
1.6 Alarm/trigger module 30
1.7 Record module 31
1.7.1 Alarm flags 32
1.7.2 Trigger flags 32
2 Functionality of the internal data memory 32
3 Procedure in case of connection aborts 33
4 ALOHA transmission mode 34
5 Automatic selection of the GSM network 35
5.1 Ban list 36
Chapter 6 Storage, delivery and transport 37
1 Inspection of incoming deliveries 37
2 Scope of supply 37
3 Storage 37
4 Transportation 37
5 Return 38
Chapter 7 Installation 39
1 Dimensions 39
2 Installing the myDatalogNANO Ex 39
2.1 Wall mounting 40
2.2 Top-hat rail assembly 42
2.3 Pipe assembly 43
3 Safety instructions for the cabling 44
3.1 Information on preventing electrostatic discharges (ESD) 44
4 Electrical installation 44
4.1 Connecting the sensors 45
4.1.1 Connection examples 47
4Rev. 01

Chapter 1 Table of contents
4.2 Connecting the GSM antenna 47
4.3 Optimum antenna positioning for assembly in a shaft 48
4.3.1 Typical influences on the signal quality 48
4.3.2 Possibilities for improving the signal quality 49
4.3.3 Procedure for determining the optimum position of the antenna 49
4.4 Technical details about the universal inputs 49
4.4.1 Digital modes (digital, day counter, pulse counter, frequency, PWM) 50
4.5 Technical details about energy management 51
4.6 Technical details about the device operating time 51
Chapter 8 Initial Start-Up 53
1 User information 53
2 General principles 53
3 Commissioning the system 53
4 Testing communication with the device 55
Chapter 9 User interfaces 57
1 User interface on the myDatalogNANO Ex 57
1.1 Operating elements 57
1.1.1 Solenoid switch 57
1.1.2 Status LED 58
2 User interface on the myDatanet-Server 59
2.1 Site configuration 59
2.1.1 Site 59
2.1.2 Comments 59
2.1.3 Measurement channels 59
2.1.3.1 Basis 59
2.1.3.2 Config 61
2.1.3.3 Alarms 66
2.1.3.4 Trigger 67
2.1.4 Calculated channels 68
2.1.4.1 Basis 68
Rev. 01 5

9.2.1.4.2 Calculation 69

9.2.1.4.3 Alarms 70

9.2.1.5 Output channels 70

9.2.1.6 Internal channels 70

9.2.1.6.1 Basis 70

9.2.1.6.2 Alarms 71

9.2.1.6.3 Trigger 71

9.2.1.7 Alarm settings 72

9.2.1.8 Basic setting 73

9.2.1.9 FTP export settings 75

9.2.2 Device configuration 75

9.2.2.1 Comments 75

9.2.2.2 Measurement instrument 75

9.2.2.3 Device-specific settings 77

9.2.2.4 GPRS 77

Chapter 10 myDatanet server 79

10.1 Overview 79

10.1.1 Explanation of the symbols 79

10.2 "Customer" area 80

10.3 "Site" area at customer level 81

10.3.1 Reports 82

10.3.2 Map view 82

10.4 Recommended procedure 82

10.4.1 Creating the site 82

10.4.2 Assigning a device to the customer 83

Chapter 11 XML interface 85

11.1 General 85

Chapter 12 Maintenance 87

12.1 General maintenance 87

12.2 Replacing the battery pack 88

6Rev. 01

Chapter 1 Table of contents
Chapter 13 Removal/disposal 91
Chapter 14 Troubleshooting and repair 93
14.1 General problems 93
14.2 Log entries and error codes 94
14.2.1 Modem error 98
14.3 Evaluating the device log 101
14.3.1 Evaluating the device log on the myDatanet server 101
14.3.2 Evaluating the device log using DeviceConfig 101
Chapter 15 Spare parts and accessories 103
15.1 Assembly sets 103
15.2 Antennas 103
15.3 Battery packs 103
15.4 Cable 103
15.5 Other accessories 103
Chapter 16 Application example 105
16.1 Flow rate measurement (in lines) 105
16.1.1 Requirements 105
16.1.2 Required configuration 105
Chapter 17 Document history 107
Chapter 18 Glossary 109
Chapter 19 Contact information 111
Rev. 01 7