Microtronics MyDatalogEx Manuel utilisateur

301022 | Rev.05

Cover

Valid from:

lFirmware version: 01v018

lApp. version: 01v000

lServer version: 49v011

lHardware version: 2.0

User manual

myDatalogEx

Chapter 1 Table of contents
Chapter 1 Table of contents
Cover 1
Chapter 1 Table of contents 3
Chapter 2 Declaration of conformity 7
Chapter 3 Ex certification 9
Chapter 4 Specifications 13
Chapter 5 General specifications 15
1 Translation 15
2 Copyright 15
3 General descriptive names 15
4 Ex protection 16
5 Safety instructions 16
5.1 Use of the hazard warnings 17
5.2 General safety instructions 17
5.3 Safety and preventative measures for handling GSM/GPRS modems 17
5.3.1 Safety and precautionary measures for the GSM/GPRS modem installation 18
5.3.2 Safety measures for installing the antenna 18
6 Overview 19
6.1 Block diagram 20
7 Intended use 20
8 General product information 21
9 Device labelling 21
10 Installation of spare and wear parts 22
11 Storage of the product 22
12 Warranty 22
13 Disclaimer 23
14 Obligation of the operator 23
15 Personnel requirements 24
Chapter 6 Functional principle 25
1 Functionality of the internal data memory 26
2 Procedure in case of connection aborts 27
3 Setup mode 27
Rev. 05 3

4 Automatic selection of the GSM network 31
Chapter 7 Storage, delivery and transport 33
1 Inspection of incoming deliveries 33
2 Scope of supply 33
3 Storage 33
4 Transport 33
5 Return 34
Chapter 8 Installation 35
1 Dimensions 35
2 Installing the myDatalogEx 36
2.1 Suspended installation 37
3 Electrical installation 38
3.1 Connecting the sensor 38
3.1.1 Connection examples 40
3.1.2 Use of the clamping tubes 41
3.2 Connecting the GSM antenna 41
3.2.1 Optimum antenna positioning for assembly in a shaft 42
3.2.1.1 Typical influences on the signal quality 42
3.2.1.2 Possibilities for improving the signal quality 42
3.2.1.3 Procedure for determining the optimum position of the antenna 42
3.3 Technical details about universal input 43
3.3.1 0/4...20mA mode 44
3.4 Technical details regarding the sensor supply 44
Chapter 9 Initial Start-Up 47
1 User information 47
2 Applicable documents 47
3 General principles 47
4 Placing the system into operation 47
4.1 Using the mobile connection (2G/3G) and the myDatanet server 47
5 Testing communication with the device 49
5.1 Testing communication between the myDatalogEx and the myDatanet server (mobile
connection) 49
Chapter 10 User interfaces 51
4Rev. 05

Chapter 1 Table of contents
1 User interface on the myDatalogEx 51
1.1 Operating elements 51
1.1.1 Reed switch 51
1.1.2 Display 52
2 User interface on the myDatanet server 54
2.1 Site configuration 54
2.1.1 Setup data 54
2.2 Device configuration 54
2.2.1 Comments 54
2.2.2 Measurement instrument 55
2.2.3 GPRS 56
Chapter 11 myDatanet server 57
1 Overview 57
1.1 Explanation of the symbols 57
2 "Customer" area 58
3 "Site" area at customer level 60
3.1 Reports 61
3.2 Map view 61
4 Recommended procedure 61
4.1 Creating the site 61
Chapter 12 API 65
1 Frontend API 65
2 rapidM2M PlaygroundrapidM2M Playground 65
2.1 Overview 66
Chapter 13 Maintenance 67
1 General maintenance 67
Chapter 14 Removal/disposal 69
Chapter 15 Troubleshooting and repair 71
1 General problems 71
2 Log entries and error codes 72
2.1 Modem error 74
3 Evaluating the device log 75
3.1 Evaluating the device log on the myDatanet server 75
Rev. 05 5