Microtek ScanMaker i450 Manuel du propriétaire
Getting to KnowYour ScanMaker i450
The ScanMaker i450 high-performance scanner with the versatility to scan photos
and lm. Features include 48-bit color, resolution of 4800 dpi, scan bed size of 8.5"
x 11.7", and seven Smart-Touch buttons on the front panel for easy access to scanner
functions. The ScanMaker i450 has a built-in transparency adapter for scanning lm
and transparencies up to 1.77" x 10". Also featured is ColoRescue™ -- Microtek's
one-touch color restoration to revive faded color in both photos and lm.
Copyright © 2017 Microtek International, Inc. http://www.microtek.com
I49-004879 C, June 2017
Supplement
ScanMaker i450 features, scenarios, and information
Contents
Getting to KnowYour ScanMaker i450..........................................................1
Features of the ScanMaker i450 ....................................................................2
Taking a Closer Look.......................................................................................3
How the Smart-Touch Scanner Buttons Work ..............................................4
PositioningYour Originals ..............................................................................6
Positioning Reflective Originals ...............................................................6
PositioningTransparent Film ....................................................................7
A. Using the Film Holder to scan 35mm Filmstrip ............................8
B. Using the Film Holder to scan 35mm Slide...................................9
Scanning Scenarios......................................................................................10
For PC Users Using ScanWizard EZ....................................................... 11
A. Scanning Photos (1) ...................................................................... 11
B. Scanning Photos (2) ......................................................................12
C. Scanning Photos (3) ......................................................................14
D. Scanning Film (1) .........................................................................16
E. Scanning Film (2)...........................................................................18
For Mac Users Using ScanPotter ...........................................................20
A. Scanning Photos ...........................................................................20
B. Scanning Film................................................................................22
Specifications / System Requirements .......................................................24
FCC Compliance Statement.........................................................................25
2 ScanMaker i450 Supplement
The ScanMaker i450 comes with several important features, including the following:
• Energy-saving LED light source: Adopting LEDs as the light source, when the
scanner is detected by the system, there are no requirements for any warm-up
time before carrying out the scan, which boots your productivity and reduces
energy costs amazingly. With its stable performance, the image quality will
remain consistent even after used for a certain period of time.
• Integrated 35mm transparency adapter: With a transparency adapter built in
to the scanner lid for scanning slides, negatives, and transparencies built into
the scanner lid, the ScanMaker i450 improves your productivity and saves you
money in having to acquire additional lm-scanning accessories.
• Exclusive lm holder: This specially designed Microtek accessory is designed to
hold slides and lm in place. By loading the lm holder on the scan bed before
scanning lm, you can ensure perfect alignment of your images and achieve
consistent scans. You can use just one lm holder to scan both 35mm slides and
lmstrip.
• Seven Smart-Touch buttons: These buttons on the front panel of the scanner
provide you with a quick and easy way to launch frequently used scanner
functions. All it takes is one touch of a button — and you can launch the scanner
button's corresponding function. The seven Smart-Touch buttons include Cancel/
Setup, Scan, Copy, E-mail, OCR, PDF, and Custom.
• Microtek's ColoRescueTM: This color restoration solution restores faded colors in
both photos and lm, bringing hues back to their original luster and brilliance for
more vibrant images. ColoRescue's one-click, automatic color recovery process
is simple and straightforward, involving no learning curve or hassle.
• Microtek ScanWizard EZ scanning software (PC): ScanWizard EZ is developed
exclusively for Microtek scanners running on a PC system. It has three unique
scan modes, the EZ mode, the Advanced mode and the Professional mode that no
matter novices and experienced users can nd it productive and easy to use.
• ScanPotter scanning software (Mac): ScanPotter is a scanning software developed
exclusively for Microtek scanners running on a Mac system. ScanPotter has a
unique and clean interface that users will nd productive and easy to use.
Features of the ScanMaker i450
ScanMaker i450 Supplement 3
Taking a Closer Look
9-pin accessory port
(with built-in transparency
adapter securely
connected)
Scan E-mailCopy OCR PDF
Cancel/
Setup
Custom
LED
Glass surface (Scan bed)
Scanner lid, with built-in
transparency adapter
Horizontal ruler
(top ruler)
Power switch
Power connector
Hi-Speed USB port (1)
4 ScanMaker i450 Supplement
How the Smart-Touch Scanner Buttons Work
The Smart-Touch buttons on the scanner simplify frequently performed tasks, such
as scanning images or sending scanned images to a printer. By pressing any of the
Smart-Touch buttons, you can activate the function associated with that button
quickly and easily.
For each scanner button, the parameters governing the use of that button are dened
or set through the Microtek Scanner Conguration (MSC) utility in your Windows
system or through ScanPotter in your Mac OS X system. For instance, you can
dene how many copies are to be printed of your scan every time you hit the “Copy”
button. To launch the MSC utilty, exit ScanWizard EZ rst, and then double-click
the MSC icon ( ) on your desktop.
Note: Make sure that you have exited ScanWizard EZ program before using scanner
buttons when you are in Windows system; however, if you are using Mac OS X, you
need to activate ScanPotter program before using scanner buttons.
The ScanMaker i450 is equipped with seven Smart-Touch buttons for easy access
to frequently used scanner functions. To carry out a specic task, simply press the
corresponding button on the scanner. The Smart-Touch buttons are:
1. Cancel/Setup: This button cancels an ongoing scan job, or launches the Microtek
Scanner Conguration utility when the scanner is idle.
2. Scan: This button captures images that can be automatically saved as les or sent
to another application for further processing.
3. Copy:This button scans the image and sends it to your printer, transforming your
scanner and printer into a convenient copy station. Simply specify the number of
copies you want. To use the Copy button to print a stack of documents:
- Place the rst page on the scanner glass surface.
- Press the Copy button to scan an image to a le, then automatically output to
your specied printer.
- Load the next page and press the Copy button again. The scanner works in
similar fashion to your printer, printing documents one after another with no
interruptions.
4. E-mail: This button scans the image and delivers it directly to your e-mail editor.
5. OCR: This button performs OCR (Optical Character Recognition) of a document
and converts it to a fully editable digital le. Saves time from retyping documents
into your word processor.
6. PDF: This button captures an image and automatically saves it as an Adobe
Portable Document Format (PDF) le for immediate viewing with the Adobe
Acrobat software.
ScanMaker i450 Supplement 5
7. Custom: This button customizes the Custom button to perform four of the most
commonly used functions, including:
- Power Saving: Turns the scanner lamp ON or OFF to save power and lamp
life.
- Scan: Denes another button to be a second “Scan” button. Use this if you
need a second “Scan” button with different parameters from the rst Scan
button.
- Fax: Launches a fax driver installed on your computer.
- Launch Application: Denes an application to be launched.
6 ScanMaker i450 Supplement
Positioning Your Originals
Positioning Reflective Originals
To scan reective originals such as photos and printed matter, use the Black Mat
came with your scanner package.
1. Raise the scanner lid, and place the photo to be scanned face down on the scanner
glass surface. Position the top end of the photo towards the back of the scanner.
2. Place the Black Mat that came with your scanner on top of the photo, then lower
the scanner lid on the scanner glass surface.
Note: Use of the Black Mat on top of your photo lters out unwanted light during
scanning, and ensures the correct functioning of the automatic cropping feature
when you do a preview scan.
ScanMaker i450 Supplement 7
Positioning Transparent Film
To scan lm, use the lm holder included with your scanner package, and match it
with the correct type of lm to be scanned, such as 35mm slides and lmstrip. Using
the lm holder ensures precise alignment of lm to yield consistent scans, and aids in
the correct performance of the automatic cropping* feature during lm scanning.
Notes on automatic cropping
For the scanner to perform automatic cropping during scanning, the following
conditions below should all be met:
• Your computer's operating system should be Windows or Mac OS X.
• The lm holder is correctly aligned on the scan bed.
• The scan material is Positive or Negative Film, with the slide or lmstrip to be
scanned correctly loaded on the lm holder.
• For Windows: In the Scan Job Queue window of ScanWizard EZ - Professional
Mode, the “Multiple Auto-crop for EZ-Lock Film Holder” option is checked.
For Mac OS X: In the Scanner Settings control panel of ScanPottter, the
“Automatic Detection” option in the Scan Frame drop-down menu is selected.
8 ScanMaker i450 Supplement
A. Using the Film Holder to scan 35mm Filmstrip
To scan 35mm lmstrips, use the lm holder, which can simultaneously hold one
strip of 6 frames.
1. Load the lmstrip face down inside the holder. Slide the lmstrip along the slot of
the holder until the lmstrip is fully loaded.
2. Raise the scanner lid, then place the lm holder with the lm on the scan bed. The
holder should be positioned against the top right edge of the scanner bed, with
the lmstrip slot running down the center.
3. Gently lower the scanner lid down onto the scan bed; the lid should be able to
close completely.
The calibration window
on the glass surface
should be kept clear
and free from any
obstruction during
scanning
To make sure the auto multiframe
cropping feature performs correctly, align
the holder’s front edge against the top
ruler of the scanner.
Note that the arrow marks on both the
lm holder and scanner's top ruler are
pointing to each other.
ScanMaker i450 Supplement 9
B. Using the Film Holder to scan 35mm Slides
To scan 35mm slides, use the lm holder, which can hold up to four mounted 35mm
slides at a time.
1. Raise the scanner lid, then place the lm holder with the lm on the scan bed. The
holder should be positioned against the top right edge of the scanner bed, with
the slide slot running down the center.
The calibration window
on the glass surface
should be kept clear
and free from any
obstruction during
scanning
To make sure the auto multiframe
cropping feature performs correctly, align
the holder’s front edge against the top
ruler of the scanner.
Note that the arrow marks on both the
lm holder and scanner's top ruler are
pointing to each other.
2. Place the 35mm slide to be scanned in the lm holder, with the slide facing down.
3. Gently lower the scanner lid down onto the scan bed; the lid should be able to
close completely.
10 ScanMaker i450 Supplement
Scanning Scenarios
The following pages provide various scenarios for scanning with the ScanMaker
i450, including the following:
For PC Users Using ScanWizard EZ,
• Scanning photos (1): This scenario can also be your rst scan in order to
familiarize yourself with scanning basics. It makes use of the EZ Mode in
ScanWizard EZ.
• Scanning photos (2): This scenario is similar to that described above but uses the
Advanced Mode in ScanWizard EZ.
• Scanning photos (3): This scenario details the steps for scanning photos. It makes
use of the Professional Mode in ScanWizard EZ.
• Scanning lm (1): This scenario details the steps for scanning lm. It makes use
of the Advamced Mode in ScanWizard EZ.
• Scanning lm (2): This scenario is similar to that described above but uses the
Professional Mode in ScanWizard EZ.
For Mac Users Using ScanPotter,
• Scanning photos: This scenario details the steps for scanning photos.
• Scanning lm: This scenario details the steps for scanning lm.
Autres manuels pour ScanMaker i450
1
Table des matières
Autres manuels Microtek Scanner
Microtek
Microtek ScanMaker i480 Mode d’emploi
Microtek
Microtek ScanMaker i700 Manuel utilisateur
Microtek
Microtek ScanMaker i280 Mode d’emploi
Microtek
Microtek ScanMaker 8700 Pro Manuel utilisateur
Microtek
Microtek Bio-6000 Manuel utilisateur
Microtek
Microtek ArtixScan M2 Instructions de montage
Microtek
Microtek Vantas 3000 Manuel utilisateur
Microtek
Microtek ArtixScan 1200DF Mode d’emploi
Microtek
Microtek ObjectScan 1600 Manuel utilisateur
Microtek
Microtek Vantas 3100 Manuel utilisateur
Microtek
Microtek ArtixScan DI 5230 Mode d’emploi
Microtek
Microtek ScanMaker s430 Manuel du propriétaire
Microtek
Microtek ArtixScanDI 4020 Plus Manuel utilisateur
Microtek
Microtek ScanMaker 3630 Manuel utilisateur
Microtek
Microtek ArtixScanDI 4020 Plus Mode d’emploi
Microtek
Microtek ScanMaker 1000XL Plus Manuel utilisateur
Microtek
Microtek ScanMaker V6UPL Manuel utilisateur
Microtek
Microtek ADF-700 Manuel utilisateur
Microtek
Microtek Bio-5000 Plus Manuel du propriétaire
Microtek
Microtek ArtixScanDI 2125c Manuel utilisateur
