Microtek ArtixScanDI 2015c Manuel utilisateur

www.microtek.com

ArtixScanDI 2015c

User's Manual

Document Imaging

Scanner

2 ArtixScan DI 2015c User's Manual

Preface

may not be reproduced or copied in any way, stored electronically, or translated

into any language, without the permission of Microtek International, Inc.

Trademarks

Microtek, ScanMaker, ArtixScan, ScanWizard and ColoRescue are trademarks

or registered trademarks of Microtek International, Inc. All other trademarks or

registered trademarks are the property of their respective holders. Specications,

software and hardware bundles are subject to change without notice. Not

responsible for typographical errors.

Disclaimer

The contents of this manual have been checked carefully for accuracy, and every

effort has been made to ensure that there are no errors. However, Microtek

makes no guarantee as to the accuracy of the contents of this document and

reserves the right to make changes to the contents without prior warning.

I49-005039 B

January 2017

Microtek International, Inc.

No. 6, Industry East Road 3, Science Based Industrial Park, Hsinchu, 30075, Taiwan

Tel: 886-3-5772155, Fax: 886-3-5772598, http://www.microtek.com

ArtixScan DI 2015c User's Manual 3

FCC Compliance Statement

This equipment (Model: MRS-600U2ADF) has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Note: A shielded Hi-Speed USB interface cable with ferrite core installed on the

scanner connector end must be used with this equipment.

Caution: Changes or modications not expressly approved by the manufacturer

responsible for compliance could void the user's authority to operate the

equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

4 ArtixScan DI 2015c User's Manual

Safety Precautions

Before using your scanner, read the following safety guides carefully, which

detail the proper operation of the scanner and its accessories to prevent injuries

or damage to users or equipment.

Power Source and AC Power Cord:

• Use a power source only with a power rating specied on the marking label.

• Insert the plug completely into the outlet, as a loose connection may cause

arcing and result in re.

• Place and route the power supply cord such that it is not likely to be walked

on or pinched by items placed upon or against them, paying particular

attention to the cord near the power plugs, convenience receptacles, and at

the point where it exits from the outlet.

• When the scanner is left unattended and unused for long periods of time,

unplug it from the wall outlet.

Moving and Storing the Scanner:

• Always lock the scanner when shipping or moving the scanner. Quick stops,

excessive force, and uneven surfaces may cause the product to overturn

when moving.

• When locking or unlocking the scanner back, do not turn the scanner upside

down.

• Do not place the scanner on any slippery, slanted, or unstable surface. The

product may slide or fall, causing serious injury to people as well as serious

damage to the product.

• Do not use this scanner near water. Never spill liquid of any kinds on the

product, or it may result in electric shock or other hazards.

• This scanner should be situated away from heat sources such as radiators,

heat registers, stoves, or other products (including ampliers) that produce

heat.

Service:

• When you need a repair service, unplug the scanner from the power outlet

and consult qualied service personnel.

• When replacement parts are required, use replacement parts that are

specied by the manufacturer or have the same characteristics as the

original parts.

ArtixScan DI 2015c User's Manual 5

Table of Contents

Preface ................................................................................................2

FCC Compliance Statement ................................................................3

Safety Precautions ..............................................................................4

Knowing aboutYour Scanner...............................................................7

Features of the ArtixScan DI 2015c .................................................... 7

Installation Requirements ................................................................... 8

Taking a Closer Look ......................................................................... 9

Top/Rear/Side View..................................................................... 9

Front/Open View....................................................................... 10

Initial Setup ....................................................................................... 11

Step 1: Unpacking Package Contents ................................................ 11

Step 2: Installing the Software.......................................................... 12

Step 3: Unlocking the Scanner.......................................................... 13

Step 4: Connecting the Scanner........................................................ 13

To the ADF .............................................................................. 13

To the Power Adapter ............................................................... 13

To the Hi-Speed USB Cable ........................................................ 14

Positioning Documents .....................................................................15

Into the ADF (Automatic Document Feeder)........................................ 15

On the Flatbed................................................................................ 17

Scanning Scenarios ...........................................................................18

Using ScanWizard DI ....................................................................... 18

Scanning Documents................................................................. 18

Scanning Documents with Barcodes ............................................ 22

Scanning Documents by Software Duplex Scan Function ............... 24

Scanning Documents from an Application .................................... 27

Utilizing Scanned Documents ...........................................................28

Scanning for OCR ........................................................................... 28

Scanning for PDF ............................................................................ 31

Scanning for Copying ...................................................................... 32

Scanning to Cloud........................................................................... 33

Scanning as Text-to-Speech (TTS) .................................................... 34

6 ArtixScan DI 2015c User's Manual

Scanner Buttons ................................................................................36

Starting Up Scanner Button Settings Interface ................................... 37

Customizing the Scanner Buttons...................................................... 38

How the Scanner Button Works ....................................................... 39

Care and Cleaning .............................................................................40

Cleaning the Scanner Glass Surfaces ................................................. 40

Cleaning the Rollers......................................................................... 41

Maintenance ......................................................................................42

Replacing the Rubber Pad................................................................. 42

Appendix ...........................................................................................43

Fixing Paper Jams ........................................................................... 43

Troubleshooting .............................................................................. 44

Specications ................................................................................. 45

ArtixScan DI 2015c User's Manual 7

Knowing aboutYour Scanner

The ArtixScan DI 2015c is a color document scanner with an built-in Automatic

Document Feeder (ADF) that can hold up to 50 sheets of papers for the

unattended volume scanning. It features 600 x 1200-dpi optical resolution, and

has a throughput run of about 15 pages per minute in color.

Features of the ArtixScan DI 2015c

The ArtixScan DI 2015c comes with several important features, including the

following:

• Included Automatic Document Feeder (ADF) — The high-capacity Automatic

Document Feeder (ADF) for the ArtixScan DI 2015c holds up to 50 sheets,

supporting dimensions from 4.14" x 5.83" (105 mm x 148 mm) to 8.5" x

25" (215.9 mm x 635 mm).

• Hi-Speed USB port — Hi-Speed USB is capable of data transfer rates of up

to 480MB/sec. Hi-Speed USB is backward compatible with the original USB

standard, providing the high/low data transfer rate via the included Hi-Speed

USB cable.

• Three programmable function buttons — The programmable function buttons

on the front panel of the scanner provide you an intuitive and easy way to

access scanner functions.

• New and Advanced Microtek ScanWizard DI software — ScanWizard DI

offers a host of features and image adjustment controls for scanning. Its

distinctive features include:

– Software duplex scan function — With this feature, ScanWizard DI

enables simplex scanners to scan both sides of a document in one

simple click. It efciently upgrades your present simplex scanner to a

duplex scanner, saving a lot of effort and money.

– Text Orientation Recognition — With this feature, the scanner

automatically rotates every saved les in a readable direction based on a

specic OCR language selected.

– Remove Blank Page — With this feature, blank pages are automatically

detected and removed by the software when scanning a stack of

documents. This function is quite helpful especially when users are

scanning double-sided documents and some of the pages only have text

on the front side.

– Remove Punch Hole — With this feature, the software automatically

detects the location of the punch holes on the scanned documents and

lls them in color. This function works for most common hole puncher

standards.

8 ArtixScan DI 2015c User's Manual

– Save multiple images as a single le — This advanced feature allows

user to save multiple scanned images as a single le, depending on the

number of the scanned images that are dened for document archival.

– Auto-crop and auto-deskew — The auto-crop function automatically

detects the size of the original image, crops the full scan frame to t the

image, and removes unwanted black borders. The auto-deskew function

automatically corrects distorted images for proper alignment.

Installation Requirements

In order to use your ArtixScan DI 2015c, your computer must satisfy the

following system requirements:

• CD/DVD-ROM drive (for installing software)

• Color display with 24-bit color output capability

• 512 MB RAM or more

• Pentium IV PC or higher with USB or Hi-Speed USB (USB 2.0) port

• Microsoft Windows XP/7/8/10

ArtixScan DI 2015c User's Manual 9

No. Names of Parts Functions of Parts

1 Tray Flap Used to open the feed tray to load documents.

2 Guide Arm Slides to hold a stack of documents.

3 Document Output Tray Stores a stack of documents which have been scanned.

4 Tray Extender Used to extend the length of the Document Feed Tray.

5 Document Feed Tray Holds the documents to be fed into the ADF

(for the high-volume document scanning).

6 Paper Stabilizer Keeps a stack of documents neatly on the Document Feed Tray.

7 ADF Cover The cover of the Automatic Document Feeder.

8 Earlobe Lever Lifts up to open the ADF cover.

9 ADF Connector Connects the ADF to the scanner.

10 Hi-Speed USB Port Connects the Hi-Seed USB (USB 2.0) cable to the computer.

11 Power Connector Connects the scanner to the power adapter.

12 Power Switch Turns the scanner on or off.

Taking a Closer Look

Top/Rear/Side View

10 ArtixScan DI 2015c User's Manual

Front/Open View

No. Names of Parts Functions of Parts

1 ADF (Scan Lid) Automatic Document Feeder.

2 Scan Sensor Area Cover Used to cover the scan sensor and rollers.

3 Glass Surface For atbed scanning of a single-sheet document.

4 Horizontal Ruler Used to measure the width of a scanned document.

5 Programmable Function Buttons Allows users to customize the buttons to perform their

preferred functions via software settings. These buttons

are F1, F2, and F3.

F1 F2 F3

Autres manuels pour ArtixScanDI 2015c

Table des matières

Autres manuels Microtek Scanner

Microtek

Microtek ScanMaker i800 Plus Mode d’emploi

Microtek

Microtek Bio-5050 Manuel utilisateur

Microtek

Microtek ScanMaker 3600 Manuel utilisateur

Microtek

Microtek ArtixScan 1200DF Mode d’emploi

Microtek

Microtek ArtixScan 6000XY Manuel utilisateur

Microtek

Microtek ScanMaker 4600 Manuel utilisateur

Microtek

Microtek ArtixScan DI 2020 Instructions de montage

Microtek

Microtek ScanMaker 3740 Manuel

Microtek

Microtek ScanMaker i280 Manuel du propriétaire

Microtek

Microtek ScanMaker i450 Manuel du propriétaire

Microtek

Microtek ObjectScan 1600 Manuel utilisateur

Microtek

Microtek ArtixScan1200DF Manuel utilisateur

Microtek

Microtek ObjectScan 1600 Manuel utilisateur

Microtek

Microtek ArtixScanDI 2125c Manuel utilisateur

Microtek

Microtek ScanMaker s430 Mode d’emploi

Microtek

Microtek ScanMaker s460 Mode d’emploi

Microtek

Microtek ScanMaker i900 Manuel utilisateur

Microtek

Microtek ArtixScan 120tf Manuel utilisateur

Microtek

Microtek ArtixScanDI 6240S Manuel utilisateur

Microtek

Microtek LightLid 35 Manuel utilisateur

Microtek

Microtek ScanMaker 1000XL Plus Manuel utilisateur

Microtek

Microtek ScanMaker i280 Mode d’emploi

Microtek

Microtek ScanMaker 4 Manuel utilisateur

Microtek

Microtek ArtixScan 120tf Manuel utilisateur

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Canon

Canon imageFORMULA CR-120N Manuel utilisateur

Fujitsu

Fujitsu FI-4860C2 Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Fujitsu

Fujitsu fi-4860C Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Fujitsu

Fujitsu CardMinder Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur