Microchip Technology SAM B11ZR Xplained Pro Manuel utilisateur
ATSAMB11ZR
SAM B11ZR Xplained Pro User Guide
Description
Microchip's SAM B11ZR Xplained Pro evaluation kit is a hardware platform used to evaluate the
ATSAMB11ZR-210CA module.
Supported by the Atmel Studio integrated development platform, the kit provides easy access to the
features of the ATSAMB11ZR and explains how to integrate the device in a custom design.
The Xplained Pro MCU series evaluation kits include an on-board Embedded Debugger, and no external
tools are necessary to program or debug the ATSAMB11ZR.
The Xplained Pro extension kits offer additional peripherals to extend the features of the board and ease
the development of custom designs.
© 2017 Microchip Technology Inc. User Guide DS70005334A-page 1
Table of Contents
Description.......................................................................................................................1
1. Introduction................................................................................................................3
1.1. Feature list....................................................................................................................................3
1.2. Kit Overview................................................................................................................................. 3
2. Xplained Pro Getting Started.....................................................................................5
2.1. Xplained Pro Quick Start.............................................................................................................. 5
2.2. Design Documentation and Relevant Links................................................................................. 5
3. Xplained Pro.............................................................................................................. 6
3.1. Xplained Pro.................................................................................................................................6
3.2. Embedded Debugger................................................................................................................... 6
3.3. Xplained Pro Analog Module........................................................................................................7
3.4. Hardware Identification System....................................................................................................8
3.5. Power Sources............................................................................................................................. 9
3.6. Xplained Pro Headers and Connectors......................................................................................10
4. Hardware User Guide..............................................................................................12
4.1. Connectors.................................................................................................................................12
4.2. Peripherals................................................................................................................................. 15
4.3. Embedded Debugger Implementation........................................................................................17
5. Hardware Revision History...................................................................................... 20
5.1. Identifying Product ID and Revision........................................................................................... 20
5.2. Hardware Revision..................................................................................................................... 20
6. Document Revision History..................................................................................... 21
The Microchip Web Site................................................................................................ 22
Customer Change Notification Service..........................................................................22
Customer Support......................................................................................................... 22
Product Identification System........................................................................................23
Microchip Devices Code Protection Feature................................................................. 23
Legal Notice...................................................................................................................24
Trademarks................................................................................................................... 24
Quality Management System Certified by DNV.............................................................25
Worldwide Sales and Service........................................................................................26
ATSAMB11ZR
© 2017 Microchip Technology Inc. User Guide DS70005334A-page 2
1. Introduction
1.1 Feature list
• ATSAMB11ZR-210CA module
• Bluetooth® host and Device mode
• One mechanical reset button
• One mechanical programmable button
• One user LED (yellow)
• Battery header (1x2 100mil header)
• 32.768 kHz crystal
• Two Xplained Pro extension headers
• Embedded Debugger
– Auto-ID for board identification in Atmel Studio
– One status LED (yellow)
– One power LED (green)
– Symbolic debug of complex data types including scope information
– Programming and debugging, including power measurements
– Data Gateway Interface (DGI): SPI, I2C, four GPIOs
– Virtual COM port (CDC)
• Embedded current measurement circuitry with support for data visualization
• USB-powered
• Supported with application examples in Atmel Software Framework
1.2 Kit Overview
The SAM B11ZR Xplained Pro evaluation kit is a hardware platform used to evaluate the
ATSAMB11ZR-210CA module.
The kit offers a set of features that enable the user to get started with the ATSAMB11ZR-210CA module
peripherals right away, and to understand how to integrate the device in their own design.
ATSAMB11ZR
© 2017 Microchip Technology Inc. User Guide DS70005334A-page 3
ATSAMB11ZR
© 2017 Microchip Technology Inc. User Guide DS70005334A-page 4
2. Xplained Pro Getting Started
2.1 Xplained Pro Quick Start
Steps to start exploring the Xplained Pro platform:
1. Download and install Atmel Studio.
2. Launch Atmel Studio.
3. Connect the Debug USB port on the evaluation kit to the computer using a USB cable (Standard-A
to Micro-B or Micro-AB).
When the Xplained Pro MCU kit is connected to the computer for the first time, the operating system
installs the driver software automatically. This driver supports 32-bit and 64-bit versions of Microsoft®
Windows® XP, Windows Vista®, Windows 7, Windows 8, Windows 10, and Windows Server 2012.
When the Xplained Pro MCU board is powered, the power LED (green) glows and the Atmel Studio
automatically detects the specific Xplained Pro MCU and extension board(s) that are connected. The
landing page of the kit in the Atmel Studio has an option to launch the Atmel Software Framework (ASF)
and the Atmel START example application codes for the kit. The SAM B device is programmed and
debugged by the on-board embedded debugger and therefore no external programmer or debugger tool
is required.
2.2 Design Documentation and Relevant Links
The following list contains links to the most relevant documents and software for the SAM B11ZR
Xplained Pro.
•Xplained products - Xplained evaluation kits are a series of easy-to-use evaluation kits for
microcontrollers and other products. For low pin count devices, the Xplained Nano series provides
a minimalistic solution with access to all I/O pins of the target microcontroller. Xplained Mini kits are
for medium pin count devices and adds Arduino Uno compatible header footprint and a prototyping
area. Xplained Pro kits are for medium to high pin count devices, and feature advanced debugging
and standardized extensions for peripheral functions. All these kits have on board programmers/
debuggers which creates a set of low-cost boards for evaluation and demonstration of features and
capabilities of different products.
•Atmel Studio - Atmel Studio presents Free Atmel IDE for development of C/C++ and assembler
code for microcontrollers and relevant documentation.
•Microchip sample store - Microchip sample store where you can order samples of devices.
•EDBG User Guide - User guide containing more information about the on-board Embedded
Debugger.
•IAR Embedded Workbench ® for ARM ® - This is a commercial C/C++ compiler that is available for
ARM . There is a 30-day evaluation version as well as a code size limited kick-start version
available from their website. The code size limit is 16KB for devices with M0, M0+, and M1 cores
and 32KB for devices with other cores.
•Atmel Data Visualizer - Atmel Data Visualizer is a program used for processing and visualizing
data. Data Visualizer can receive data from various sources such as the Embedded Debugger Data
Gateway Interface found on Xplained Pro boards and COM ports.
•SAM B11ZR Xplained Pro BluSDK - Software, firmware, applications, and tools packages.
ATSAMB11ZR
© 2017 Microchip Technology Inc. User Guide DS70005334A-page 5
3. Xplained Pro
3.1 Xplained Pro
Xplained Pro is an evaluation platform which contains a series of microcontroller boards (evaluation kits)
and extension boards. Atmel Studio is used to program and debug the microcontrollers on these boards.
Atmel Studio includes Advanced Software Framework (ASF) and Atmel START, which has drivers and
demo code, and Data Visualizer, which supports data streaming and advanced debugging. Xplained Pro
evaluation kits can be connected to a wide range of Xplained Pro extension boards through standardized
headers and connectors. Xplained Pro extension boards have identification (ID) chips to uniquely identify
which boards are connected to the Xplained Pro evaluation kits.
3.2 Embedded Debugger
The SAM B11ZR Xplained Pro contains an Embedded Debugger (EDBG) for on-board debugging. The
EDBG is a USB composite device with the following interfaces:
• Debugger
• Virtual COM Port
• Data Gateway Interface (DGI)
The EDBG can program and debug the ATSAMB11ZR with the help of Atmel Studio. The SWD interface
is connected between the EDBG and the ATSAMB11ZR on the SAM B11ZR Xplained Pro.
The Virtual COM Port is connected to a UART on the ATSAMB11ZR and provides an easy way to
communicate with the target application through terminal software. It offers variable baud rate, parity, and
stop bit settings. The settings on the ATSAMB11ZR must match the settings given in the terminal
software.
Info: The Virtual COM Port in the EDBG requires the terminal software to set the Data
Terminal Ready (DTR) signal to enable the UART pins connected to the ATSAMB11ZR. If the
DTR signal is not enabled, the UART pins on the EDBG are kept in tri-state (high-z) to render
the COM Port not usable. The DTR signal is automatically set by some terminal software, but it
may have to be manually enabled in your terminal.
The DGI consists of several physical interfaces for bidirectional communication with the host computer.
Communication over the interfaces is bidirectional. It can be used to send event values, and data from
the ATSAMB11ZR. Traffic over the interfaces can be timestamped by the EDBG for more accurate tracing
of events, but timestamping reduces the maximal data throughput. The Data Visualizer is used to send
and receive data through DGI.
The EDBG controls two LEDs on the SAM B11ZR Xplained Pro, a power LED and a status LED. The
following table provides details on how the LEDs are controlled in different operation modes.
ATSAMB11ZR
© 2017 Microchip Technology Inc. User Guide DS70005334A-page 6
Table 3-1. EDBG LED Control
Mode Power LED Status LED
Normal mode The power LED is ON when
power is applied to the board.
Activity indicator, the LED flashes
when any communication
happens to the EDBG.
Bootloader mode (idle) The power LED and the status LED blink simultaneously.
Bootloader mode (firmware
upgrade)
The power LED and the status LED blink in an alternating pattern.
For additional information on the EDBG, see the EDBG User Guide.
3.3 Xplained Pro Analog Module
3.3.1 Overview
The Xplained Pro Analog Module (XAM) extends the embedded debugger with high dynamic range
current measurement. This enables power profiling of the target system.
Figure 3-1. XAM Block Diagram
ADC0
ADC1
20x
voltage
reference
2.7V
Control MCU
GND
S&H
ADC
Calibration
circuitry
Calibration ON/OFF
AREF
GPIO
GPIO(s)
GPIO
100 mOhm
100 Ohm
EDBG
SPI
Clock sync
SWD
Sync GPIO
I2C
2x
16x
Current input
Current output
Range selection
Pre-amplifier
Active filter with
gain
Xplained Pro Analog Module (XAM)
20x
The XAM consists of:
• Calibration circuitry
• Voltage reference circuitry
• Analog front-end:
– Shunt resistors with a range selection switch
– Pre-amplifier
– Two active filters with gain
• Control MCU
ATSAMB11ZR
© 2017 Microchip Technology Inc. User Guide DS70005334A-page 7
– Analog-to-Digital Converter
– Signal processing
– Control/communication interface to the EDBG
The current measurement front-end is a high side shunt measurement with a pre-amplifier and a second
active filter stage with gain as shown in Figure 3-1. The wide dynamic range is achieved by four
measurement ranges, which are defined by two shunt resistors and the two parallel second stage active
filters with gain.
3.3.2 Sample Rate
The raw sampling rate of the XAM is up to 250 kHz and with the default averaging configuration (average
of 16 samples), the actual output of the XAM is 16.67 ksps.
Info: The XAM output sample rate is not an integer fraction of the raw sampling.
3.3.3 Measurement Ranges and Accuracy
The XAM has four measurement ranges. These are defined by two shunt resistors and two gain stages.
Table 3-2. XAM Measurement Ranges and Accuracy
Measurement
Range
Hardware Resolution Accuracy Comments
Range 1 Low current shunt and
high gain stage
20 nA 1 LSB ±1% Accuracy will decrease below
1 μA. Typical accuracy for
300 nA is 1 LSB ±10%.
Range 2 Low current shunt and
low gain stage
150 nA 1 LSB ±1%
Range 3 High current shunt and
high gain stage
10 μA 1 LSB ±1%
Range 4 High current shunt and
low gain stage
100 μA 1 LSB ±1% Accuracy will decrease above
100 mA. Typical accuracy is
1 LSB ±5% at 400 mA.
Maximum current is 400 mA.
The ranges are automatically switched by the XAM to achieve the best measurement results and the
currently active range is visualized in the Data Visualizer front-end tool. The maximum voltage drop over
the shunt resistor is 100 mV, and the XAM switches the range automatically before reaching this limit.
3.4 Hardware Identification System
All Xplained Pro extension boards come with an identification chip (ATSHA204A CryptoAuthentication™
chip) to uniquely identify the boards that are connected to the Xplained Pro evaluation kit. This chip
contains information that identifies the extension with its name and some extra data. When an Xplained
Pro extension is connected to an Xplained Pro evaluation kit, the information is read and sent to the
Atmel Studio. The following table shows the data fields stored in the ID chip with example content.
ATSAMB11ZR
© 2017 Microchip Technology Inc. User Guide DS70005334A-page 8
Table 3-3. Xplained Pro ID Chip Content
Data Field Data Type Example Content
Manufacturer ASCII string Microchip'\0'
Product name ASCII string Segment LCD1 Xplained Pro'\0'
Product revision ASCII string 02'\0'
Product serial number ASCII string 1774020200000010’\0’
Minimum voltage [mV] uint16_t 3000
Maximum voltage [mV] uint16_t 3600
Maximum current [mA] uint16_t 30
3.5 Power Sources
The SAM B11ZR Xplained Pro kit can be powered by several power sources as listed in the table below.
Table 3-4. Power Sources for SAM B11ZR Xplained Pro
Power input Voltage requirements Current requirements Connector marking
External power 5V ±2% (±100 mV) for
USB host operation.
4.3V to 5.5V if USB host
operation is not
required.
Recommended
minimum is 1A to be
able to provide enough
current for connected
USB devices and the
board itself.
Recommended
maximum is 2A due to
the input protection
maximum current
specification.
PWR
Embedded debugger
USB
4.4V to 5.25V (according
to USB spec.)
500 mA (according to
USB spec.)
DEBUG USB
Battery header is another power input, refer to Battery Header.
The kit will automatically detect which power sources are available and choose which one to use
according to the following priority:
1. External power.
2. Embedded Debugger USB.
Note: The selection for the supply of the Target MCU has a separate connector. The above priority
selects which supply is used to power the EDBG and the VCC_P3V3_CON.
Info: External power is required when 500mA from a USB connector is not enough to power
the board with possible extension boards. A connected USB device in a USB host application
might easily exceed this limit.
ATSAMB11ZR
© 2017 Microchip Technology Inc. User Guide DS70005334A-page 9
3.6 Xplained Pro Headers and Connectors
3.6.1 Xplained Pro Standard Extension Header
All Xplained Pro kits have many dual row, 20-pin, 100-mil extension headers. The Xplained Pro MCU
boards have male headers, while the Xplained Pro extensions have their female counterparts. All
connected pins follow the defined pin description in the table.
Info: Not all pins are always connected on all extension headers.
The extension headers can be used to connect a variety of Xplained Pro extensions to Xplained Pro MCU
boards or to access the pins of the target microcontroller on the Xplained Pro boards.
Table 3-5. Xplained Pro Standard Extension Header
Pin Number Pin Name Description
1 ID Pin to communicate with the ID chip on an extension board.
2 GND Ground
3 ADC(+) Analog-to-Digital Converter; alternatively, a pin for the positive
terminal of a differential ADC.
4 ADC(-) Analog-to-Digital Converter; alternatively, a pin for the negative
terminal of a differential ADC.
5 GPIO1 General purpose I/O pin.
6 GPIO2 General purpose I/O pin.
7 PWM(+) Pulse width modulation; alternatively, a pin for the positive part of a
differential PWM.
8 PWM(-) Pulse width modulation; alternatively, a pin for the negative part of a
differential PWM.
9 IRQ/GPIO Interrupt request pin and/or general purpose I/O pin.
10 SPI_SS_B/
GPIO
Slave select pin for Serial Peripheral Interface (SPI) and/or general
purpose I/O pin.
11 I2C_SDA Data pin for I2C interface. Always connected, bus type.
12 I2C_SCL Clock pin for I2C interface. Always connected, bus type.
13 UART_RX Receiver pin of target device UART.
14 UART_TX Transmitter pin of target device UART.
15 SPI_SS_A Slave select for SPI. This pin should preferably not be connected to
anything else.
16 SPI_MOSI SPI master out slave in pin. Always connected, bus type.
17 SPI_MISO SPI master in slave out pin. Always connected, bus type.
ATSAMB11ZR
© 2017 Microchip Technology Inc. User Guide DS70005334A-page 10
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Microchip Technology Carte mère
Microchip Technology
Microchip Technology Microsemi PD70201EVB-25F-D-5 Manuel utilisateur
Microchip Technology
Microchip Technology ATmega4809 Xplained Pro Manuel utilisateur
Microchip Technology
Microchip Technology dsPIC33 series Manuel utilisateur
Microchip Technology
Microchip Technology CAP1 Series Manuel utilisateur
Microchip Technology
Microchip Technology dsPICDEM 1.1 Manuel utilisateur
Microchip Technology
Microchip Technology PICkit 2 Manuel utilisateur
Microchip Technology
Microchip Technology MCP73833 Manuel utilisateur
Microchip Technology
Microchip Technology AVR-IoT WG Manuel utilisateur
Microchip Technology
Microchip Technology ATtiny1607 Curiosity Nano Manuel d'installation
Microchip Technology
Microchip Technology MCP251XFD CAN FD Manuel utilisateur
Microchip Technology
Microchip Technology DM160232 Manuel utilisateur
Microchip Technology
Microchip Technology PAC1934 Manuel utilisateur
Microchip Technology
Microchip Technology MCP401XEV Manuel utilisateur
Microchip Technology
Microchip Technology DT100108 Manuel utilisateur
Microchip Technology
Microchip Technology PAC1934 Manuel utilisateur
Microchip Technology
Microchip Technology MCP2221 Manuel utilisateur
Microchip Technology
Microchip Technology PICDEM Touch Sense 2 Manuel utilisateur
Microchip Technology
Microchip Technology BM62 Manuel utilisateur
Microchip Technology
Microchip Technology MCP19114 Manuel utilisateur
Microchip Technology
Microchip Technology MIC7401 Manuel utilisateur
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
