Mi-Light fullwat LENNY-MD-092 Manuel utilisateur
remote control - 4 ZONES control
LENNY-MD-092
Owners manual
by
Smart LED control system
New smart LED color control system with 2.4GHz remote control.
Auto synchronisation and auto transmission functions.
The device adopts low power consumption technologies
and one controller can manage several receivers at the same time.
The system does not produce interference as it uses a very low level transmission signal.
Suitable for simple installations in both domestic and professional environments.
LENNY-MD-092 4ZONES control
Smart LED control system
by
2
Technical specifications ...................................................................................3
Single color.......................................................................................................5
Touch panel functions
Mobile control
Tunable white....................................................................................................6
Touch panel functions
Mobile control
RGB ...................................................................................................................7
Touch panel functions
Mobile control
RGBW ................................................................................................................9
Touch panel functions
Mobile control
RGBWW ...........................................................................................................11
Touch panel functions
Mobile control
Led Strip-controller connection ......................................................................13
List of LENNY-DRV-LS2 modes and functions for RGB / RGBW / RGBWW ............15
List of LENNY-DRV-WL5 modes and functions for RGB / RGBW / RGBWW...........15
System linking and unlinking ..........................................................................16
Device auto-sync............................................................................................17
Auto-transmitting function ..............................................................................17
Installation diagram .......................................................................................18
Mobile phone pairing.....................................................................................19
ALEXA linking...................................................................................................23
Google Home linking......................................................................................24
Google Assistant linking..................................................................................25
Compatibility table.........................................................................................26
Table of controls by zones ............................................................................. 27
LENNY-MD-092 4ZONES control
Smart LED control system
by
3
Technical specifications
Remote control
Model LENNY-MD-092
Voltage 3V (2 AAA batteries)*
Emitting power 6dBm
Standby current 20uA
Working temperature -20~60°C
Working frequency 2400-2483.5MHz
Modulation type GFSK
Aprox. operational distance 30m
* Not included.
DIRECT CURRENT DRIVERS
LENNY-DRV-LS2 LENNY-DRV-WL5 LENNY-DRV-WL2P
Description 5 in 1 receiver WiFi 5 in 1 receiver WiFi 2 in 1 receiver
Voltage DC12V~24V (terminal block & jack plug inputs)
Output max. current 6A per channel 12A per channel
Total current 15A 12A
Working temperatue -20~60°C -10~40°C
Working frequency 2.4GHz
Aprox. operational distance 30m
Connection mode Common anode
WIFI Requires gateway
LENNY-WIFOX1 Included
23
124
38
SwitchIndicator light
Made in PRC
INPUT
V+RGBCW
V+RGBW
V+RGB
V+CWCW
OUTPUT
WWWW
WW
V+WWWWW
Model No.: LENNY-DRV-LS2
Working Temperature: -20~60°C
Input Voltage: DC12V~24V
Output: 6A/Channel
Total Output: Max 15A
RF: 2.4GHz
Control Distance: 30m
5 IN 1 Smart LED Controller
RGB+CCT Mode
RGBW Mode
RGB Mode
Indicating lamp
show output mode
Dual White Mode
Green
Blue
Red
Yellow
Single Color ModeWhite
23
124
38 17
74.5
36
LENNY-DRV-LS2 LENNY-DRV-WL5 LENNY-DRV-WL2P
20
138
56
LENNY-MD-092 4ZONES control
Smart LED control system
by
4
Technical specifications
ALTERNATE CURRENT DRIVER TRIAC controller
Model LENNY-TRIAC1
Input voltage AC 100-240V 50/60Hz
Output voltage AC 100-240V
Ouput current MAX 1.36A
Output power 150W@100VAC;
300W@240VAC
Regulation method Wireless RF, push button, APP
RF range 30m
Working temperature -10-40ºC
WIFI Requires gateway
LENNY-WIFOX1
49
25 49
WIFI GATEWAY
Model LENNY-WIFOX1
Working voltage DC5V/500mA (Micro USB)
Working temperature -20~60°C
Communication WiFi-IEEE 802.11b/g/n 2.4GHz
Working frequency 2.4GHz
Transmission power
6dBm
* Suggested AC/DC adaptors (not included): MWMU10GS
FU-ADPY10-5-USB
90,5 15
66
2.4GHz Gateway
Model No.: LENNY-WIFOX1
INPUT
DC5V / 500mASET
Input Voltage: DC5V/500mA (Micro USB)
Working Temperature: -20~60°C
Communication Mode: WiFi-IEEE 802.11b/g/n 2.4GHz
RF: 2.4GHz
2.4GHz RF Transmitting Power 6dBm
2.4GHz RF Control Distance: 30m
Link
SYS
Support amazon alexa and
google assistant control
Scan to Install APP
Made in PRC
by
LENNY-MD-092 4ZONES control
Smart LED control system
by
5
by
SINGLE COLOR
Remote control functions: LENNY-MD-092
To regulate LED strip, we must use “brightness regulation” bar. Use “ON” and “OFF” keys to switch LED strips on and off.
Note: We need one driver at least per each zone we want to control.
Mobile control
For control via mobile phone, Alexa, Google Home or Google Assistant, a WIFI gateway is required, either built into the
receiver or using the LENNY-WIFOX1 gateway.
ON /OFF
Brightness level regulation
Exit preload mode
and night mode
Timer Link / Unlink
Preloaded modes
Increase the speed
of the preloaded modes
Decrease the speed
of preloaded modes
Define LED type:
Single color
Tunable white
RGB
RGB+white
RGB+tunable white
Night mode: 1% brightness
WIFI RECEIVER WIFI GATEWAY
Brightness control.
Saturation control
4 zones ON..
4 zones OFF.
Selected zone ON. Also used to link and
unlink driver from this zone.
Selected zone OFF.
Pre-loaded modes.
Brightness level regulation
Master ON
Saturation
control
Zone OFF
Zone ON
Master OFF
by
Decrease speed
preloaded mode
Increase speed
preloaded mode
Zone
LENNY-MD-092 4ZONES control
Smart LED control system
by
6
by
TUNABLE WHITE
Remote control functions: LENNY-MD-092
On the remote control, use slide bar “dynamic white” to switch between different white tones.
To regulate LED strip, we must use “brightness regulation” bar. Use “ON” and “OFF” keys to switch LED strips on and off.
Note:
We need one driver at least per each zone we want to control.
Mobile control
For control via mobile phone, Alexa, Google Home or Google Assistant, a WIFI gateway is required, either built into the
receiver or using the LENNY-WIFOX1 gateway.
ON /OFF
Brightness level regulation
Exit preload mode
and night mode
Link / Unlink
Programmed modes
Increase the speed
of the programmed modes
Change color temperature
if our system is ready
to support such function
Decrease the speed
of programmed modes
Define LED type:
Single color
Tunable white
RGB
RGB+white
RGB+tunable white
Night mode: 1% brightness
WIFI RECEIVER WIFI GATEWAY
Brightness control.
Color saturation level.
Dynamic white regulation.
4 zones ON.
4 zones OFF.
Zone ON: Selected zone ON. Also used to link
and unlink driver from this zone.
Zone OFF: Selected zone OFF
Programmed modes.
Tunable white
Brightness level regulation
Master ON
Color
saturation
Zone OFF
Zone ON
Master OFF
by
Decrease speed
programmed mode
Increase speed
programmed mode
Timer
Zone
LENNY-MD-092 4ZONES control
Smart LED control system
by
7
RGB
Remote control functions: LENNY-MD-092
Note: One driver per each zone is necessary unless.
Slide your finger over the coloured ring to
change colors.
Colors and White Brightness regulation.
White color offered mixing R+G+B and it is
regulated with CCT slide control.
Color saturation level.
4 zones ON at once.
4 zones OFF at once.
Dynamic programmed modes.
Under dynamic mode running, you can get light
running faster with this switch.
Under dynamic mode running, you can get slow
speed with this switch.
Selected zone ON. Also it is used to link and unlink
every drive from this zone.
Selected zone OFF.
by
Zone OFF
Brightness level regulation
Programmed modes
Zone ON
Master ON
Color ring
Color
saturation
Speed +
Speed –
Master OFF
White color
Working mode:
• Select color: Touch color wheel on desired color (e.g.blue).
• “Color saturation” bar: Adjust color saturation (0% chosen color, 100% very saturated color).
• Brightness level: Adjust brightness level.
• White: With any color selected from color wheel, click on “white colour bar” to set full white with R+G+B mixing.
– If we slide on the bar, we will get a “dynamic white” tone mixing R+G+B (from the left is warmer and to the right is
cooler).
– Brightness bar: allows you “white level” brightness regulation.
LENNY-MD-092 4ZONES control
Smart LED control system
by
8
RGB
Control con móvil
For control via mobile phone, Alexa, Google Home or Google Assistant, a WIFI gateway is required, either built into the
receiver or using the LENNY-WIFOX1 gateway.
Working mode
• Select color: Touch color wheel on desired color (e.g. blue).
• Saturation: Adjust color saturation (0% chosen color, 100% very saturated color).
• Brightness level: Adjust brightness level.
• White color: Bring out white color using R+G+B mixing combination (If maximum level is required, set saturation bar at
highest level).
• Tunable white: System allows to simulate dynamic white levels using RGB leds.
Color ring
White with RGB
ON / OFF
Saturation
Tunable white
Timer
Modes
0%
0%
100%
100%
Increase the speedDecrease the speed
Brightness level regulation
Define LED type:
Single color
Tunable white
RGB
RGB+white
RGB+tunable white
LENNY-MD-092 4ZONES control
Smart LED control system
by
9
RGBW
Remote control functions: LENNY-MD-088
by
Note: One driver is necessary per every zone.
Slide your finger over the coloured ring to
change colors.
Color brightness level and white changing.
Turns on white channel (from 4th channel) at
full brightness. To regulate white, slide bar for
“white channel regulation” must be used. It
is not possible to achieve white with R+G+B
combination.
Increasing or decreasing white brightness
channel only (from 4th channel). If there is a
previously selected RGB colour, adds white to
the RGB colour.
4 zones ON.
4 zones OFF.
Dinamic modes.
Under dynamic mode running, you can get light
running faster with this switch.
Under dynamic mode running, you can get slow
speed with this switch.
Selected zone ON. Also used to link and unlink
driver from this zone.
Selected zone OFF.
Brightness regulation
Pre-loaded modes
Zone ON
Master ON
Color ring
White color
regulation
Speed +
Zone OFF
Speed –
Master OFF
ON of the white color
Working mode
• Select color: Touch color wheel on desired color (e.g.blue).
• Brightness bar: Adjust brightness level.
• Activate only white: Click on the bar “ON white colour”. It will be activated at 100%. To regulate brightness we will use
slide bar “brightness regulation”.
• Activate Colour + White: Choose colour with slide colour wheel and adjust white with slide saturation bar (0%
-downwards - white channel off, 100% - upwards - white channel on at maximum).
• Colour + White and colour removing: Press slide bar “ON white colour”.
• Colour + white and white removing: slide bar “white channel regulation” up to 0% (downwards).
LENNY-MD-092 4ZONES control
Smart LED control system
by
10
RGBW
Mobile control
For control via mobile phone, Alexa, Google Home or Google Assistant, a WIFI gateway is required, either built into the
receiver or using the LENNY-WIFOX1 gateway.
Color ring
White
ON / OFF
Saturation
Timer
Modes
0%
0%
100%
100%
Increase the speedDecrease the speed
Brightness
Define LED type:
Single color
Tunable white
RGB
RGB+white
RGB+tunable white
Working mode
• Select color: Touch color wheel on desired color (e.g. blue).
• “Saturation” bar: Adjust color saturation (0% chosen color, 100% very saturated color).
• Brightness level: Adjust brightness level.
• White light: Only white channel activation set.
– The “Brightness slide bar” is used to set desired brightness level.
• Color + White activation: Choose color with “color slide wheel” and set white level with saturation bar (0% white
channel off, 100% white channel set at max level).
• Color + tunable white and turn off white: We lower the saturation to 0%.
• Remove Color + white and Color levels: Press “White light”.
Ce manuel convient aux modèles suivants
4
Table des matières
Autres manuels Mi-Light Système de contrôle
Mi-Light
Mi-Light fullwat TRIAC CONTROL Manuel utilisateur
Mi-Light
Mi-Light FUT027 Instructions d'installation
Mi-Light
Mi-Light fullwat LENNY-PAN-B0 Manuel utilisateur
Mi-Light
Mi-Light MIBOXER LDRF-RGB6-TC4 Manuel utilisateur
Mi-Light
Mi-Light MiBoxer S1-B Manuel utilisateur
Mi-Light
Mi-Light MIBOXER FUT043A Manuel utilisateur
Mi-Light
Mi-Light LS3 Instructions d'installation
