MF DIGITAL OptiPrinter Manuel utilisateur

TP 000 023 (1.03) For Windows 2000 & XP only ZZ 004 805

CD/DVD Inkjet Printer

Guide

2. Power Up

You should find the following packaged with yo

ur printer:

OptiPrinter

bPower Cable

cUSB Cable

dManual/Driver/

Test Image CD

2 Blank CDs

fBlack & Color

Cartridge

gDiscus Software

hQuick Start Guide

1. Unpack

3. Inserting Ink Cartridges

CD Tray Button

Pins

Press the CD Tray Button and the

tray will slide forward to receive a

blank CD. Place a CD onto the

tray, resting the disc against the

two pins at the front of the tray.

Press the CD Tray Button once

again and the tray slides back into

the printer.

Power Cable

USB Cable

Power On

Attach the pow

er cable to the back of the printer and plug into

the power supply.

Press the Power On button located on the front of the printer.

Raise Cradle

Latch

Open Printer Lid

Remove Plastic Tape

Open the lid of the printer and the

cartridge cradle will

slide to the center

(Note:

the cradle will not slide to the

middle unless a CD has been loaded into

the CD tray as described previously).

Raise the 2 cradle latches. Remove the

plastic tape from the print cartridge and

push the cartridge firmly into the c

radle.

Close the latch.

Finally, close the printer lid.

Remove the tape securing the printer lid then open the lid and

remove the 2 pieces of protective tape on the CD Tray itself.

TP 000 023 (1.03) For Windows 2000 & XP only ZZ 004 805

Guide

CD/DVD Inkjet Printer

4. Loading Printer Driver

You must load the OptiPrinter printer driver onto your PC before you can print using the OptiPrinter.

1. Connect the OptiPrinter to your PC using the USB cable (see point 2 on the previous page)

2. Switch on your PC and place the CD which contains the Print Driver into your PC’s CD-ROM drive

3. Your PC should automatically recognize the addition of New Hardware in the form of the M F Digital OptiPrinter and the “Digital

Signature Not Found box” message box will appear. You will be asked if you wish to continue installation, select Yes. (select

Continue Anyway if using Windows XP)

4. You will now be asked to locate the Print Driver. Click on the Browsebutton and navigate to the ENU_Release folder on the CD in

your PC’s CD-ROM. Click Open and the file “ENU_Release” will appear in the “Copy Files from” window. Click OK and the Print Drive

will begin loading. Once complete, click Finish

5. The OptiPrinter printer driver has been successfully loaded onto your PC

If at any point in the above process you encounter problems, you should load the OptiPrinter print driver via the ADD Printer icon on your

Printer Settings.

5. Loading Discus/QuickTime Software

The

Discus software included with your OptiPrinter allows you to create stunning designs for your discs. Insert the Discus CD into your PC’s

CD-ROM drive.

1. Follow Standard Settings

2. At the registration Window, click Next

3. At Select Viewer Associations Window, select Windows File Types, & Internet File Types & Notification of other Applications

4. The QuickTime Launcher & ReadMe window will appear

5. Remove the tick from both the ReadMe File & Launch Quick Time player. Click Close

6. The QuickTime window will appear. Closewindow

7. The Launcher screen will now appear

8. Click Install to hard disk and on the next screen, select the drive where you wish to load the program (usually your C drive)

9. The Discus program will install. Click OK on the command “Installation is Complete”

10. Discus is now installed on your PC. You will be asked to enter the serial number included at the first run of the Discus software.

TP 000 023 (1.03) For Windows 2000 & XP only ZZ 004 805

CD/DVD Inkjet Printer

Guide

Printing a CD

6. Open Discus

Set Outer & Inner

Diameter

Ensure

X & Y at

to 0mm

•

With Discus

open, select the CD/DVD label type

•Select the Print tab and click the Setup Button (see Fig.1).

•Select M F Digital OptiPrinter from the drop-down list of printers. For paper size,

select A4 (210 x 297mm) and for source select Upper Tray

•Click OK

•Next, click the Select template Button and choose the M F Digital OptiPrinter

•Adjust the position of the red slider buttons to set the Outer Diameter to 119.5mm

and the Inner Diameter to 39.5mm

Ensure that the X & Y Nudge Button dimensions are set at 0mm & 0mm

7. Run a Test Print

Ensure you have a blank CD loaded into the OptiPrinter’s tray.

Now click the Test Print button and the Print Properties box appears. Ensure the M F Digital OptiPrinter is selected from the list of printers

(click icon once to highlight it).

•Under the Setup tab, set Print Quality to Normal, and Disk Surface Type to Inkjet Quality/Other Inkjet

•Under the Features tab, remove the tick from the Enable HP Preview

•Under Mask Settings,remove the tick from Enable Masking

•Select Print.A command box appears asking if you are “Ready To Print?”, select OK

A series of circles will print onto the blank CD and should look like Fig. 2 on the next page. However, minor adjustments may be required if the

circles on the test print do not print centrally (as shown in Fig. 3). Adjust the template on the Discus interface by using the X & Y nudge keys to

move the template up, down, left, & right.

Note: Every OptiPrinter is factory set for the correct position, however, CDs can vary in size and it may be necessary to make minor adjustments

using the nudge feature.

TP 000 023 (1.03) For Windows 2000 & XP only ZZ 004 805

Guide

CD/DVD Inkjet Printer

8. Adjusting the Template

When you are happy that the template is in the correct position,

place a blank CD into the CD tray. Select Print and Print again.

9. Printing an Image

Now that the template is in place, you are

now ready to print the test image,

which has been included on the User

Manual/Driver/Test CD shown below.

Insert this CD into your PC’s CD-ROM.

Place a blank CD into the OptiPrinter’s

tray.

In Discus, select

File

and then

Open

Project

and then navigate to and open

the file called “TestCD.cdl” located in

your PC’s CD-ROM.

The screen below will appear.

Select the

tab on the Discus interface.

Press Print and Print again. When the

“Ready To Print?” prompt appears, select

OK.

The test image should print out as per the

CD image in Fig. A

It may be necessary to reboot your PC at

some point during this Quick Start process.

If at any time you encounter problems with

your OptiPrinter, please refer to the

Operating & Maintenance Manual then

contact your Dealer or the M F Digital

Support Department.

Fig. A

Autres manuels MF DIGITAL Imprimante

MF DIGITAL

MF DIGITAL SCRIBE EC Manuel utilisateur

MF DIGITAL

MF DIGITAL Scribe SA series Instructions de montage

MF DIGITAL

MF DIGITAL P-55 Manuel utilisateur

MF DIGITAL

MF DIGITAL 5000 Platform Series Manuel

MF DIGITAL

MF DIGITAL PicoJet 6000 Manuel utilisateur

MF DIGITAL

MF DIGITAL ScribeEC Manuel utilisateur

MF DIGITAL

MF DIGITAL Signature Pro Manuel utilisateur

MF DIGITAL

MF DIGITAL PicoJet 6000 Manuel utilisateur

MF DIGITAL

MF DIGITAL Spectrum 2 Manuel utilisateur

MF DIGITAL

MF DIGITAL PicoJet 6000 Manuel utilisateur

MF DIGITAL

MF DIGITAL Scribe EC 3000 Manuel utilisateur

MF DIGITAL

MF DIGITAL PicoJet 6000 Manuel utilisateur

MF DIGITAL

MF DIGITAL PerfectImage Manuel utilisateur

MF DIGITAL

MF DIGITAL Scribe 9600 series Instructions de montage

MF DIGITAL

MF DIGITAL SCRIBE EC Manuel utilisateur

MF DIGITAL

MF DIGITAL Signature IV Manuel utilisateur

MF DIGITAL

MF DIGITAL Spectrum 2 Manuel

MF DIGITAL

MF DIGITAL PicoJet 6000 Manuel utilisateur

MF DIGITAL

MF DIGITAL OptiEC OptiPrinter Manuel d'installation et d'exploitation

MF DIGITAL

MF DIGITAL PicoJet 6000 Instructions de montage

MF DIGITAL

MF DIGITAL SCRIBE EC Manuel utilisateur

MF DIGITAL

MF DIGITAL 5906 series Instructions de montage

MF DIGITAL

MF DIGITAL PJ-6000 D Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur