Mezger AC-1 Manuel utilisateur
Bluetooth TWS Earbuds
AC-1
User Guide
INCLUDED
A) Left ear bud
B) Right ear bud
C) Charging case
D) XS/S/M/L silicone tips
E) S/M/L memory foam tips
F) Charging cable
C
A
D E F
B
CHARGING
To charge the earphones, place them in the
charging case, wait for white LED to turn RED
and close the lid. Open the case to check
if the red LED has turned off. If the LED is
off, earphones are fully charged. Charging
time is approximately 1.5 hours for 6 hours
of playtime. A fully charged case provides 5
extra earphone charges when on-the-go. The
number of lights indicates the charging case
battery status when the earphones are placed
in the case. 3 lights = 67-100% charged,
2 lights = 34-66% charged, 1 light = 1-33%
charged, 0 lights = 0% charged. Charge
the case using the USB-A to USB-C cable
connected to a computer or wall charger. Each
indicator at the back of the charging case
flashes white when charging and turns solid
white when fully charged. Charging time is
approximately 2 hours.
SET-UP / PAIRING
Remove earphones from the charging case
and tap the right earphone to turn it on. Keep
a distance of less than 20 cm between the left
and right earphones. The product indicator will
turn from red white, a sound is heard when the
earbuds are connected to each other. Activate
Bluetooth functionality on the input device,
select Mezger AC-1, once connected the LEDs
will flash white twice. The product is ready
for use. Mezger AC-1 remembers previously
connected devices. When turned on, Mezger
AC-1 attempts to reconnect to previously
connected devices.
FITTING
Mezger AC-1 contains silicone tips and
memory foam tips. Mezger AC-1 is fitted with
medium silicone tips out of the box.
When using the memory foam tips, squeeze
down the foam tip and roll the tip into a thin,
round cylinder. Pull back and up on the ear
into the canal. Gently insert the entire tip into
the ear. Hold the tip in place until it expands.
1
2
3
4
CONTROLS
Double tap the left earphone to skip to
the previous song and double tap the right
earphone to skip to the next song during
music playback. For incoming calls, tap either
one of the earphones to accept or hold for
5 seconds to reject. During a call, double tap
either one of the earphones to terminate the
call or triple tap to transfer audio from Mezger
AC-1 to the connected device.
Table des matières
