Meteo Control RS485 Manuel utilisateur
meteocontrol GmbH | Spicherer St
raße 48 | D-86157 Augsburg | on +49 (0)821 34666 - 88 (Support)
ax +49 (0)821 34666
- 11 | email in o@meteocontrol.com | web www.meteocontrol.com
Text and illustrations represent state
-o -the-art technology at the time o printing Subject to technical modi ications No liability or printing errors.
Item number
832057 • Version 20160202
MX
MXMX
MX-
--
-MODULE
MODULEMODULE
MODULE
RS485/422
RS485/422RS485/422
RS485/422
Quick Start Guide
Version 20160202
1
DEVICE OVERVIEW
LED: Power Status
LED:
Device
LED: Bus-
2
LED: Bus-
1
Connector or
expansion
Inter ace
or
RS485/422
Inter ace
or
RS
485/422
Case lock
1
2
3
4
5
6
7
8
LED: Power Status
Device
Status
2
Connection
1
Connection
Connector or
blue’Log
or
RS485/422
– 1
or
485/422
- 2
2
CONNECTION ORDER
When connecting MX-Modules to the blue’Log X
basis device
ollowing order needs to be considered:
The number o lines (incl. line with arrow)
at the bottom o
ront panel o the blue’Log as well as the MX-
Modules
indicates the order o connection.
When installing various MX-Modules, they
must be
rom le t to right sorted by the
ascending number o
l
ine with arrow). Following illustration describes the correct
procedure.
WARNING
WARNINGWARNING
WARNING
Order o ex
Order o exOrder o ex
Order o expansion modules
pansion modulespansion modules
pansion modules
When connecting the MX-M
odules in a wrong
might occur
and correct unction can no longer be ensured.
basis device
, the
at the bottom o
the
Modules
must be
connected
ascending number o
lines (incl.
ine with arrow). Following illustration describes the correct
odules in a wrong
order,
errors
and correct unction can no longer be ensured.
3
PREPERATION
Remove the upper and lower cap
rom your blue’Log X basis
device.
Disconnect your blue’Log X basis device
rom the power
supply.
Remove the cap on the right side o the case
rom your
blue’Log X basis device according
to the manual.
INSTALLATION
The blue’Log X basis device is expanded by the
MX
RS485/422 with two additional inter aces and
blue’Log X basis device
RS485/422
inter ace
MX-Module RS485/422
RS485/422
inter ace
1
rom your blue’Log X basis
rom the power
rom your
to the manual.
MX
-Module
.
inter ace
– 2
inter ace
– 1
2
3
4
4
*Re er to point 3
Connect the MX-Module RS485/422
*
to the
blue’Log
basis device
*
, until no visible gap remains.
Check or secure
it.
Interlock both modules (
*
and
*
)
by closing the
opened case locks.
Reattach the previously removed side cap
to the right side o
the expansion module and asten it by closing the case locks.
blue’Log
X
Check or secure
by closing the
previously
to the right side o
the expansion module and asten it by closing the case locks.
5
*Re er to point 3
PIN ASSIGNMENT
The ollowing pin assignment can be applied to both (top and
bottom) RS485/422 inter aces (
*
and
*
).
Pin
PinPin
Pin
RS485
RS485RS485
RS485
RS422
RS422RS422
RS422
1 --- RX+
2 --- RX-
3 RS485 A (+) TX+
4 RS485 B (-) TX-
5 GND GND
6, 7, 8 --- ---
6
STATUS-LEDS
Symbol
SymbolSymbol
Symbol
L
LL
LED
EDED
ED
Explanation
ExplanationExplanation
Explanation
Green on:
Module supplied with
power
O :
Error in power supply
Green on:
Standard mode:
Module recognized
O :
Error
:
Module not recognized
Blinking orange
Data
trans er inter ace 2
active
Steady orange
light
Error on
inter ace 2
Blinking orange
Data
trans er inter ace 1
active
Steady orange
light
Error on
inter ace 1
Ce manuel convient aux modèles suivants
1
Autres manuels Meteo Control Unité de contrôle
Manuels Unité de contrôle populaires d'autres marques
Festo
Festo Compact Performance CP-FB6-E Manuel de la liste des pièces
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur
JS Automation
JS Automation MPC3034A Manuel utilisateur
JAUDT
JAUDT SW GII 6406 Series Guide rapide
Spektrum
Spektrum Air Module System Manuel utilisateur
BOC Edwards
BOC Edwards Q Series Manuel utilisateur
