• Place of installation
• Do not place the machine near inammable solvents such as alcohol or
diluents.
• Do not install the machine in excessively damp and dusty places, exposed
to direct sunlight, outdoors or near to heat sources.
Machine installation in these places could cause res or electric shocks.
• The appliance is not suitable for outdoor use and it is also not recommen-
ded to install it in very damp rooms.
• For safe and correct functioning the appliance must be placed at
• Electric power supply
• Do not connect or disconnect the machine from the socket with wet hands.
• Insert the plug into the wall socket rmly.
• Do not damage, modify, stretch, bend or twist the power cable.
Do not place heavy objects on the power cable.
• Do not connect the machine to a socket to which other equipment is
connected (extensions, 2 or 3 plug adaptors, etc.)
• Do not use the machine if the power cable is tied or knotted.
• If smoke, unusual smells or strange noises are found coming from the
machine, disconnect it immediately from the socket and contact the local
retailer or technical service assistance.
Use of the machine in these conditions could cause res or electric
shocks.
• Periodically disconnect the machine from the socket and clean the plug
and socket with a dry cloth.
If the machine is connected in a place exposed to dust, smoke or high
humidity, the dust accumulated on the plug will absorb humidity and this
could alter the insulation and trigger a re.
• The appliance must not be installed where water jets can be generated.
• Do not spray water on the device; this could cause electric shocks or
res.
• Use a damp cloth to clean the machine. Do not use inammable solvents
such as alcohol, benzene or diluents. If inflammable substances come in
contact with the electrical components inside the machine, they can cause
res or electric shocks.
Never use water jets to clean the machine.
• Before cleaning the machine, switch it off and disconnect it from the socket.
Not being switched off or accidental switching on during cleaning could
cause injuries to persons or damages to the machine.
1 BEFORE USING THE APPLIANCE
GB
Failure to comply with any of these safety regulations could
cause res, electric shocks or damage the machine
