MegaLite Circa Manuel utilisateur

USER MANUAL

Table of Contents

Safety Information……………………………………...………………2

Specifications………………………………………...…………………3

Main Power Connection…………………………...…………………..4

DMX-512 Connection……………………………..…………………...4

Main Control Menu……………………………………………………..5

Rigging the Fixture……………………………….…………………….7

Accessories……………………………………………………………..7

DMX Profile.....................................................................................7

Cleaning & Maintenance...............................................................11

Parts List.......................................................................................11

Check that the unit has not been damaged during transport

Protection Against Fire

1. Maintain a minimum of 1 foot distance from any type of flame.

3. Replace fuse only with the specified type and rating.

4. Do Not install the unit to close to a heat source.

5. Make sure cable are properly secured away from unit movement.

6. Maximum surface operating temperature 104º.

Protection Against Electrical Damage

1. Disconnect power before lamp replacement or servicing.

2. For connection to main power supply proceed to page 4.

3. This unit must be earthed. (electronically grounded)

4. Do not expose unit to rain or moisture.

5. Unit must not be left on for a long period of time.

Protection Against Mechanical Hazards

1. Use safety chain when hanging unit.

2. Use quality clamps or bolts when positioning unit

3. Do not open unit risk of electrical shock.

Part Numbers

Fixture Flight Case

5200– Circa Scoop LED CAS-5200-2Dual Road Case

Mechanical Specifications

Fixture Packaged for Shipping

Size: 20.68” x 10.8” x 19.25”

Weight: 18.3 lb

DMX Connectors: 5-pin XLR Connectors

Mounting Yoke: Square Yoke (Accessory Circular Yoke Available)

Power Connectors: Power Con Type

Thermal: Maximum ambient temperature 110° F

Maximum surface temperature 140° F

Fastening System: 1 Quick Release Clamp Mounts

240V 50/60 HZ

Size: 24” x 15.5” x 22.75”

Weight: 30 lb

20.68” (with handles)

7.5”

19.25”

3.80”

Electrical Specifications

DMX 512 Protocol

DMX Modes: Mode 1 2 Channels Dimmer, Macro

Mode 2 3 Channels Dimmer, Warm White, Amber

Mode 3 17 Channels Dimmer, Outer R, G, B, Macro, Macro Speed, Outer Strobe, Inner R, G, B, Macro, Macro Speed, Inner Strobe,

Warm White, Amber, Reflective Center, Center Strobe

Mode 4 52 Channels Dimmer, Outer, RGB x 8, Inner RGB x 8, Warm White, Amber, Reflective Warm White

Mode 5 55 Channels Dimmer, Outer, RGB x 8,Outter Strobe, Inner RGB x 8, Inner Strobe, Warm White, Amber, Reflective Warm

White, Center Strobe

Control Options: Display Control

Control & Programming

LED Quantity: 336 RGB 87 Warm White 45 Warm White + Amber SMD LEDS Watts: 0.8 Watt each

Fuse: 5x20 F5AL250V

LED Angle: 140° (outer ring)

Power Input Voltage: 110V-240 50/60 Hz

Ballast: Electronic auto switching

Power Consumption Watts: 428

Amps: 3.70

LED Lifetime: *60 to 100 thousand hours

Scan Rate: 7000Hz

*LED Manufactures rated average life span

10.8”

7.25”

15.12”

Specifications

Main Power Connection

Caution!

1. Do not connect fixture to a dimmer system.

2. This unit must be earthed. (electronically grounded)

3. Replace fuse only with the specified type and rating.

4. Power link maximum 4 units at 110V

The occupation of the connection-cable is as follows:

This device is equipped with a auto switching power supply that will allow you to work from 100V-240V 50/60Hz

Caution!

At the last fixture the DMX signal needs to be terminated with a terminator. Solder a

120 Ohm resistor between the (-) and the (+) signal into a 5 pin XLR plug and plug it

in to the last fixture on the signal run. Pre-manufactured terminator plugs are availa-

ble for purchase from your Mega-Lite dealer (P-DMX-T).

Cable (USA) Cable (EU) Pin 110V

Black Brown

White

Green

Light Blue

Yellow/Green

Live

Neutral

Ground

220V

110V

Connection 220V

Connection

DMX-512 Connection

The fixture is equipped with 3 and 5 pin XLR Sockets for DMX input and output. The sockets are wired in parallel. Only

use a shielded twisted pair cable designed for RS-485 and 3 or 5 pin XLR plugs and connectors in order to connect the

controller with the fixture or the fixture with another.

DMX—Input DMX—Output

1. Shield

2. Signal (-)

3. Signal (+)

4. N/A

5. N/A

Display Control

17 CH Dimmer, Outer R,G,B, Macro, Macro Speed, Outer Strobe, Inner R,G,B, Macro, Macro Speed, Inner Strobe, Warm White, Am-

ber ,Reflective Center, Center Strobe

3 CH Dimmer, Warm White, Amber

2 CH Dimmer, Macro

52 CH Dimmer, Outer RGBx8, Inner RGBx8,Warm White, Amber, Reflective Warm White

55 CH Dimmer, Outer RGBx8, Outer Strobe, Inner RGBx8, Inner Strobe, Warm White, Amber, Reflective Center, Center Strobe

DMX Address

Press Enter to select the DMX start channel. Use the up/down keys (001 to 512) , Press

Enter to confirm the setting. Press ESC to return to Main Menu. Number in parentheses is

the next available DMX Channel.

(Notes: Display must be on Main Menu for fixture to operate on DMX Mode)

ESC DOWN UP ENTER

Mega Lite

Circa Scoop

V1.2

Address

001

(018)

DMX On

Press Enter to select the DMX Channel mode of operation. Use the up/down

keys to select Channel mode from

Press Enter to confirm the setting. Press ESC to return to Main Menu.

Channel Mode

Main Menu

>Channel Mode

Led Dimmer

Led Strobe

LED Dimmer

Main Menu

Channel Mode

>Led Dimmer

Strobe Mode For LED Dimmer control press Enter. Select from 255 steps. Of the 52 ch. Press ESC to

return to Main Menu.

Auto Mode

Main Menu

>Auto Mode

Auto Speed

Temperature

Press Enter. Select from 6 modes Press ESC to return to Main Menu.

(Note: If you want to have fixture remain on Auto Test do not press ESC and just power off

and on fixture to return to last setting)

Strobe

This function allows you to select a preprogrammed strobe sequences. Press Enter use

the up/down keys to select desired strobe program (15 options). Press Enter to set the

desired sped use the up/down keys (15 options). Press Enter to confirm the settings.

(note; Dimmer of selected intensity must be dimmed prior in Dimmer option)

Main Menu

Channel Mode

Led Dimmer

>Strobe Mode

Auto Speed

Main Menu

Auto Mode

>Auto Speed

Temperature

Press Enter. Select from 6 modes Press ESC to return to Main Menu.

(Note: If you want to have fixture remain on Auto Test do not press ESC and just power off

and on fixture to return to last setting)

Setting

Setting Control Options

Main Menu

Dimmer Speed

Temperature

>Setting

Config Menu

>Oled Back Light

DMX Fail

Dimmer Setting

To turn off display screen after 2 minutes of no use select Disable. To enable

screen to remain on when in use select Enable.

Config Menu

LCD Back Light

>DMX Fail

Dimmer Setting

To hold the last DMX command is case of DMX Signal loss select Enable. To have

the fixture DMX Setting at 0 if DMX signal is loss use Disable option.

Config Menu

LCD Back Light

DMX Fail

>Dimmer Setting

Select Dimmer Setting to be used for dimming type when used in Ch3 mode.

Linear

Square Law

Inv. Square Law

S Type

Config Menu

DMX Fail

Dimmer Setting

>Factory Reset

Restore fixture to original factory display settings

Temperature

This fixture is equipped with internal temperature sensors. Once head reaches a tempera-

ture of 96°the IP rated fan will engage

Main Menu

Auto Mode

Auto Speed

>Temperature

DMX Profile

Rigging the fixture

Caution!

1. The installations must be carried out by an authorized dealer or trained professional.

2. Unit may cause severe injures if you have doubts concerning the safety do not install.

3. Unit is to be 24inches away from flammable materials (decoration material)

4. Use high quality installation equipment to hang unit.

When rigging a unit it is very important that you follow common safety procedures. Rigging requires extensive experi-

ence including but not limited to calculating working loads, material being used and periodic safety inspections. If you

lack these qualifications, do not attempt the installation yourself, instead use a professional structural rigger.

When rigging the unit always be secured with a secondary safety attachment. The installation location of the projector

has got to be built in the way that it can hold 10 times the weight for 1 hour with out any harming. Installation should be

checked at least one time a year by a skilled person.

Rigging the fixture

Circa Scoop LED 2 Ch Mode

DMX Channel Function Description Value Init

1Dimmer Dimmer Off to Full 0-255 255

No Function 0-41

Macro 1 (slow to fast) 42-83

2Macro Macro 2 (slow to fast) 84-125 0

Macro 3 (slow to fast) 126-167

Macro 4 (slow to fast) 168-209

Macro 5 (slow to fast) 210-255

Circa Scoop LED 3 Ch Mode

DMX Channel Function Description Value Init

1Dimmer Dimmer Off to Full 0-255 255

2LED Color Center & Back Warm White 0-255 255

3LED Color Center Amber 0-255 255

5200-ACC-BAS Removable Floor Base

Accessories

Circa Scoop LED 17 Ch Mode

DMX Channel Function Description Value Init

1Dimmer Master Dimmer Off to Full 0-255 255

2LED Color Outer Red LED intensity 0-255 255

3LED Color Outer Green LED Intensity 0-255 255

4LED Color Outer Blue LED Intensity 0-255 255

No Function 0-1

Fade Clockwise 2-24

Fade Counter Clockwise 25-49

Snap Clockwise 50-74

5Outer Ring Snap Counter Clockwise 75-99 0

Macro 2468 then 1357 Fade 100-124

(Select Color) 2468 then 1357 Snap 125-149

Bounce Fade 12345678765432 150-174

Bounce Snap 12345678765432 175-199

Top to Bottom 18,27,34,56,34,27 200-224

Side to Side 23,14,85,76 225-255

6Macro Speed Outer Ring Macro Speed 0-255 0

No Function 0-1

Strobe (slow to fast) 1-127

7Outer Ring Strobe Pulse (slow to fast) 128-170 0

Strobe Random Strobe All (slow to fast) 171-213

Random 1-8 Strobe (slow to fast) 214-255

8LED Color Inner Red LED intensity 0-255 255

9LED Color Inner Green LED Intensity 0-255 255

10 LED Color Inner Blue LED Intensity 0-255 255

No Function 0-1

Fade Clockwise 2-24

Fade Counter Clockwise 25-49

Snap Clockwise 50-74

11 Inner Ring Snap Counter Clockwise 75-99 0

Macro 2468 then 1357 Fade 100-124

(Select Color) 2468 then 1357 Snap 125-149

Bounce Fade 12345678765432 150-174

Bounce Snap 12345678765432 175-199

Top to Bottom 18,27,34,56,34,27 200-224

Side to Side 23,14,85,76 225-255

12 Macro Speed Inner Ring Macro Speed 0-255 0

No Function 0-1

Strobe (slow to fast) 2-127

13 Inner Ring Strobe Pulse (slow to fast) 128-170 0

Strobe Random Strobe All (slow to fast) 171-213

Random 1-8 Strobe (slow to fast) 214-255

14 Warm White Center Warm White 0-255 255

15 Amber Center Amber 0-255 255

16 Warm White Center Reflective Warm White 0-255 255

No Function 0-1

Strobe (slow to fast) 2-127

17 Center Strobe Strobe Pulse (slow to fast) 128-170 0

Random Strobe All (slow to fast) 171-213

Random Strobe 1-3 (slow to fast) 214-255

Circa Scoop LED 52 Ch Mode

DMX Channel Function Description Value Init

1Dimmer Master Dimmer Off to Full 0-255 255

2LED Color Outer 1 Red LED intensity 0-255 0

3LED Color Outer 1 Green LED intensity 0-255 0

4LED Color Outer 1 Blue LED intensity 0-255 0

5LED Color Outer 2 Red LED intensity 0-255 0

6LED Color Outer 2 Green LED intensity 0-255 0

7LED Color Outer 2 Blue LED intensity 0-255 0

8LED Color Outer 3 Red LED intensity 0-255 0

9LED Color Outer 3 Green LED intensity 0-255 0

10 LED Color Outer 3 Blue LED intensity 0-255 0

11 LED Color Outer 4 Red LED intensity 0-255 0

12 LED Color Outer 4 Green LED intensity 0-255 0

13 LED Color Outer 4 Blue LED intensity 0-255 0

14 LED Color Outer 5 Red LED intensity 0-255 0

15 LED Color Outer 5 Green LED intensity 0-255 0

16 LED Color Outer 5 Blue LED intensity 0-255 0

17 LED Color Outer 6 Red LED intensity 0-255 0

18 LED Color Outer 6 Green LED intensity 0-255 0

19 LED Color Outer 6 Blue LED intensity 0-255 0

20 LED Color Outer 7 Red LED intensity 0-255 0

21 LED Color Outer 7 Green LED intensity 0-255 0

22 LED Color Outer 7 Blue LED intensity 0-255 0

23 LED Color Outer 8 Red LED intensity 0-255 0

24 LED Color Outer 8 Green LED intensity 0-255 0

25 LED Color Outer 8 Blue LED intensity 0-255 0

26 LED Color Inner 1 Red LED intensity 0-255 0

27 LED Color Inner 1 Green LED intensity 0-255 0

28 LED Color Inner 1 Blue LED intensity 0-255 0

29 LED Color Inner 2 Red LED intensity 0-255 0

30 LED Color Inner 2 Green LED intensity 0-255 0

31 LED Color Inner 2 Blue LED intensity 0-255 0

32 LED Color Inner 3 Red LED intensity 0-255 0

33 LED Color Inner 3 Green LED intensity 0-255 0

34 LED Color Inner 3 Blue LED intensity 0-255 0

35 LED Color Inner 4 Red LED intensity 0-255 0

36 LED Color Inner 4 Green LED intensity 0-255 0

37 LED Color Inner 4 Blue LED intensity 0-255 0

38 LED Color Inner 5 Red LED intensity 0-255 0

39 LED Color Inner 5 Green LED intensity 0-255 0

40 LED Color Inner 5 Blue LED intensity 0-255 0

41 LED Color Inner 6 Red LED intensity 0-255 0

42 LED Color Inner 6 Green LED intensity 0-255 0

43 LED Color Inner 6 Blue LED intensity 0-255 0

44 LED Color Inner 7 Red LED intensity 0-255 0

45 LED Color Inner 7 Green LED intensity 0-255 0

46 LED Color Inner 7 Blue LED intensity 0-255 0

47 LED Color Inner 8 Red LED intensity 0-255 0

48 LED Color Inner 8 Green LED intensity 0-255 0

49 LED Color Inner 8 Blue LED intensity 0-255 0

50 LED Color Center Warm White 0-255 0

51 LED Color Center Amber 0-255 0

52 LED Color Reflective Warm White 0-255 0

Table des matières

Autres manuels MegaLite Équipement d'éclairage

MegaLite

MegaLite DECO TENTACLE Manuel utilisateur

MegaLite

MegaLite Linebot Q480 Manuel utilisateur

MegaLite

MegaLite ARFlood Manuel utilisateur

MegaLite

MegaLite TUFFBABYVW-42 Manuel utilisateur

MegaLite

MegaLite Drama W50 LED Manuel utilisateur

MegaLite

MegaLite XWITCH Manuel utilisateur

MegaLite

MegaLite DECO CITYSCAPE Q30 Manuel utilisateur

MegaLite

MegaLite Pro Color Strip Manuel utilisateur

MegaLite

MegaLite N-E Color Strip Manuel utilisateur

MegaLite

MegaLite Drama Profile VW2 Manuel utilisateur

MegaLite

MegaLite Tuff Baby P-84 Manuel utilisateur

MegaLite

MegaLite AXIS 250 Manuel utilisateur

MegaLite

MegaLite DECO Driver CV4 Manuel utilisateur

MegaLite

MegaLite Axis LED Manuel utilisateur

MegaLite

MegaLite LIGHT PIPE 5049-03 Manuel utilisateur

MegaLite

MegaLite Framebot 600 Manuel utilisateur

MegaLite

MegaLite HELIUS M Manuel utilisateur

MegaLite

MegaLite Deco Vintage Scoop Q32 Manuel utilisateur

MegaLite

MegaLite Followbot 1000W LED Manuel utilisateur

MegaLite

MegaLite DECO Driver CV4 Manuel utilisateur

MegaLite

MegaLite Deco Flex C Manuel utilisateur

MegaLite

MegaLite outshine ww100 Manuel utilisateur

MegaLite

MegaLite Axis QD7 Manuel utilisateur

MegaLite

MegaLite PARAMOUNT PENDANT Q350 Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur