Meelectronics AF32 Manuel utilisateur
USER MANUAL
part of the series
STEREO BLUETOOTH
®
WIRELESS HEADPHONES
model: AF32
PACKAGE CONTENTS
1
Runaway AF32
Stereo Bluetooth
Wireless Headphones
Charging cable
(USB – 3.5mm)
Stereo audio cable
(3.5mm – 3.5mm)
Carrying pouch
User manual
PRODUCT OVERVIEW
Stereo Bluetooth
Wireless Headphones
RIGHT EAR CUP
2
LED indicator light
Multifunction button ( / )
Previous track button ( )
Next track button ( )
Volume down button ( )
Volume up button ( )
Headphone / charging jack
Microphone
A
B
C
D
E
F
G
H
+
-
CHARGING
*** You must completely charge the headphone before the first use ***
Connect the USB charging cable to any powered USB port and to the 3.5mm
jack on the right earcup. Make sure it is plugged in fully. Charge time is
typically 2-3 hours.
The red LED light will stay lit while the headphones are charging and will blink
or turn off completely when the headphones are ready for use. A blinking red
LED light indicates a trickle charge mode, whereby the battery is charged
almost fully and the headphones are maintaining their current charge level.
Note: the Runaway cannot be turned on or used while charging.
INDICATOR LIGHT STATE WHEN CHARGING CABLE IS PLUGGED IN:
LIGHT PATTERN STATUS NOTES
Solid red light Battery charging Allow to charge for 2-3 hours
Blinking red light Trickle charge Ready for use
All lights off Battery full Ready for use
When the battery is low, the headphones will say “Battery low” every
60 seconds and the red light will flash three times every three seconds.
Apple devices such as the iPhone®, iPad®, and iPod® Touch will display a
headphone battery indicator when the Runaway is connected.
3
4
TURNING ON AND OFF
To turn on, press and hold the Multifunction button for approximately 3
seconds. The headphones will say “Power on” and the blue LED light will flash.
To turn off, press and hold the Multifunction button for approximately 4
seconds. The headphones will say “Power off” and the red LED light will flash.
PAIRING WITH BLUETOOTH DEVICES
*** Your headphones must be paired to a Bluetooth device before it can be
used. It is only necessary to pair your headphones once with each device. ***
1) Open the Bluetooth menu on the device you wish to pair (see Locating
the Bluetooth Menu on page 5 for more details). Some devices require
you to select “Search for Devices” or “Add New Device” in order to create a
Bluetooth pairing.
2) With the headphones turned off, press and hold the Multifunction button for
approximately 6 seconds until the headphones say “Pairing”. The red and
blue LED lights will flash in an alternating pattern while the Runaway is in
pairing mode. (Note: The Runaway will enter standby mode if not paired
within 90 seconds.)
3) Wait until you see “Air-Fi Runaway” on your device screen.
4) Select “Air-Fi Runaway” on your device and follow any further prompts
to pair. Use “0000” if a pin is required. Once pairing is complete and a
connection is established, the blue LED light will flash several times.
LOCATING THE BLUETOOTH MENU
iPhone, iPad, and iPod Touch
a) On your device, go to
Settings
b) Select
Bluetooth
. If Bluetooth is not on, turn it on. The iPhone/iPad/iPod will
automatically search for new devices
Android™Phones and Tablets
a) On your device, go to the
Settings
menu
b) Select
Bluetooth
(on older Android devices Bluetooth is found in the
Wireless & Networks
menu). If Bluetooth is not on, turn it on. Select “Search
for Devices” if your phone or tablet does not automatically search for new
devices
Windows®Phone 8 Devices
a) On your device, open the
Settings
menu
b) Select
Bluetooth
. If Bluetooth is not on, turn it on. The Windows phone will
automatically search for new devices
Computers, Laptops, and Other Devices
Visit www.meelec.com/bluetooth for pairing, connecting, and setup
information.
If pairing fails after several tries, please refer to your device’s user manual for
further information. Visit www.meelec.com/bluetooth for instructional pairing
videos, troubleshooting, and additional Bluetooth connectivity information.
CONNECTING WITH PAIRED DEVICES
Once the Runaway is turned on, it will automatically connect with the last
paired Bluetooth device that is on and within range. If the Runaway is
not connected automatically, tap the multifunction button once to initiate
connection with last paired device. If the headphones still do not connect,
open the Bluetooth menu on your device and select “Air-Fi Runaway” from the
Bluetooth device list.
On some computers, Bluetooth audio must be enabled manually every time
you connect.
5
6
CONTROLS
The Runaway can control media and phone calls from a smartphone or tablet.
1. ADJUSTING THE VOLUME
FUNCTION OPERATION NOTES
Increase volume Press the Volume Up
button
When the volume reaches
the minimum or maximum
level the Runaway will
produce a short tone.
Decrease volume Press the Volume
Down button
Note: Volume can be adjusted only while media is playing or during a phone call.
With most devices, volume adjustments will change the volume of the headphones
independently of the connected device while playing media. Adjust device volume
as needed to further increase or decrease the volume. During a phone call the
headphones will directly control device volume.
2. CONTROLLING PHONE CALLS
STATUS FUNCTION OPERATION
Incoming call Answer call Press the Multifunction button
Reject call Press and hold the Multifunction button
for 2 seconds
Call in progress End call Press the Multifunction button
Transfer call
between
headphones
and phone*
Press and hold the Multifunction button
for 2 seconds until you hear a tone
Mute /
unmute call
Double press the Multifunction button
to mute; double press again to unmute
(continues on page 7)
CONTROLS (CONTINUED)
2. CONTROLLING PHONE CALLS (CONTINUED)
STATUS FUNCTION OPERATION
Call in
progress,
second
ncoming call
Answer new
call and put
current call
on hold
Press the Multifunction button
Reject
incoming call
Press and hold the Multifunction button
for 2 seconds until you hear a tone
One call active,
one on hold
Switch
active calls
Press and hold the Multifunction button
for 2 seconds until you hear a tone
End current
call and
switch to call
on hold
Press the Multifunction button
*If you answer an incoming call from your phone instead of the headphone, most
phones will activate the phone speaker. Press and hold the Multifunction button for 2
seconds to transfer the call to the headphones.
3. CONTROLLING MEDIA PLAYBACK
STATUS FUNCTION OPERATION
No media playing* Play media Press the Multifunction button
Media playing Pause media
playback
Press the Multifunction button
Media playing
or paused
Skip to next track** Press the Next Track button
Restart track /
previous track**
Press the Previous Track button
*You may need to focus on the media player application by bringing it up on the
screen for initial playback to start.
** Not all media players support this functionality.
Note: If you answer or make a call while listening to media, the media will be paused
until the call has ended.
(continues on page 8)
7
8
CONTROLS (CONTINUED)
4. ADDITIONAL FUNCTIONALITY
FUNCTIONALITY OPERATION NOTES
Redial last call* Double press the
Multifunction button
when no call is in
progress
Headphones will say “Last
number redial”
Activate Siri ®/
voice command/
voice dialing*
Press and hold the
Multifunction button
for 2 seconds
Headphones will produce
a tone and media will be
paused. Press and hold
Multifunction button for 2
seconds again to cancel.
Battery meter Press the volume
up or volume down
button when the unit
is in standby mode
(no media playing/
no active phone
calls)
Headphones will provide
approximate battery state as
either “Battery high”, “Battery
medium”, or “Battery low”
*Not all devices support this functionality. For more information, refer to the user
manual for your device.
MULTIPOINT
Multipoint allows two Bluetooth devices to be connected to the Runaway
simultaneously, providing additional flexibility for your multimedia experience.
1. MULTIPOINT PAIRING
To use two Bluetooth devices with the Runaway, first pair them by following
the pairing procedure described in the Pairing with Bluetooth Devices
section on Page 4 for each device and then turn off the headphone. Both
devices will need to be paired before multipoint can be used.
When turned on again, the Runaway will automatically attempt to connect to
the 2 most recently-paired devices, as long as they have Bluetooth enabled
and are within range. If a device that has already been paired does not
connect automatically, select “Air-Fi Runaway” from the Bluetooth menu of
the device.
If you no longer wish to connect to multiple devices, disable Bluetooth on
the device you do not want connected to the Runaway or remove the “Air-Fi
Runaway” pairing from the Bluetooth menu of the device.
(continues on page 10)
9
Autres manuels pour AF32
1
Table des matières
Autres manuels Meelectronics Casque audio
Meelectronics
Meelectronics Air-Fi Matrix AF62 Manuel utilisateur
Meelectronics
Meelectronics Air-fi rumble AF80 Manuel utilisateur
Meelectronics
Meelectronics Sport-FI M6 Manuel utilisateur
Meelectronics
Meelectronics SPORT-FI X6 Manuel utilisateur
Meelectronics
Meelectronics Sport-FI X7 Manuel utilisateur
Meelectronics
Meelectronics M6PRO-CL Manuel utilisateur
Meelectronics
Meelectronics Sport-Fi S6P Manuel utilisateur
Meelectronics
Meelectronics EDM Universe Manuel utilisateur
Meelectronics
Meelectronics Atlas Manuel utilisateur
Meelectronics
Meelectronics edm Manuel utilisateur
Meelectronics
Meelectronics Matrix 2 AF62 Manuel utilisateur
Meelectronics
Meelectronics VENTURE AF52 Manuel utilisateur
Meelectronics
Meelectronics SPORT-FI Manuel utilisateur
Meelectronics
Meelectronics AF32 Manuel utilisateur
Meelectronics
Meelectronics AF72 Manuel utilisateur
Meelectronics
Meelectronics AF65 AIR-FI Touch Manuel utilisateur
