MEE X20 Manuel utilisateur
TRULY WIRELESS
ACTIVE NOISE CANCELLING
IN-EAR HEADPHONES
POWERED BY
Scan QR code or visit:
MEEaudio.com/X20Support
X20 SETUP GUIDE
X20
TRULY WIRELESS
ACTIVE NOISE CANCELLING
Package Contents
GETTING STARTED
USB-C Charging
Cable
X20 Truly Wireless
Earphones
Charging
Case
Eartips
(3 Pairs)
Connect charging
case to a USB port
or wall adapter
using the included
USB cable.
STEP 1: CHARGING
Place both earpieces in the case and close the lid
or press the button on the case to charge.
Charging:
Solid White
Charged:
Lights off
Charging Case Indicator Lights Earpiece Indicator Lights
OR
Charging: Blinking Red Charged: Solid White
1.5
hrs
OR
AT&T LTE 12:26 PM 95%
Bluetooth
Settings
MEE audio X20
Bluetooth
STEP 2: PAIRING
Remove both earpieces from the case. Open the
Bluetooth menu
on your device
and select “MEE
audio X20”.
The right
earpiece will
automatically
enter Bluetooth
pairing mode.
Pairing mode is indicated
by flashing alternating
blue and white lights
Earpiece Indicator Lights
Once pairing is complete,
a blue light will blink
intermittently
Earpiece Indicator Lights
STEP 3: FITTING
Select the eartips with the best sound and
comfort for your ears.
Identify the left and right earpieces.
Adjust each earpiece until it fits flush in your ear and
the eartip seals the ear canal. If your music sounds
tinny or lacks bass, try different eartips.
LEFT RIGHT
Put each earpiece in the corresponding ear.
Press and hold the touch panel on either earpiece
for 2 seconds to enable or disable the Active
Noise Canceling (ANC) function. A voice prompt
will provide the ANC status.
STEP 4: ACTIVE NOISE CANCELING (ANC)
HOLD touch panel on either earpiece for 2 secs
OR
LEFTRIGHT
Note: If earpieces are sweaty or damp, allow
them to fully dry before storing them in the case.
When done listening, place both earpieces back in
the case and close the case lid.
STEP 5: POWERING OFF
SUBSEQUENT USE
When removed from the charging case, the X20
reconnects automatically to the last paired Bluetooth
device that is in range.
To reconnect manually, open the Bluetooth menu on
your device and select “MEE audio X20” from the
Bluetooth device list.
You can also use either earpiece as a single-ear
headset by leaving the other earpiece in the case.
FUNCTIONALITY & CONTROLS
Power On
Play / Pause
HOLD touch panel on
each earpiece for 3 secs
TAP touch panel on either earpiece
remove
from case
Power Off
HOLD touch panel on
each earpiece for 10 secs
place in case and
close lid
LEFT RIGHT
Siri®/ Google Assistant™/ Voice Control
TAP touch panel on either earpiece 2x
RIGHTLEFT LEFT
Previous Track
TAP touch panel
on left earpiece 3x
3x
OR OR
OR
OR
Next Track
TAP touch panel
on right earpiece 3x
RIGHT
3x
LEFTRIGHT LEFTRIGHT
Answer / End Call Reject Call
TAP touch panel on either earpiece 2x
RIGHTLEFT
2x 2x
OR
Turn ANC On / Off
HOLD touch panel on either earpiece for 2 secs
LEFT RIGHT
OR
1x 1x
2x 2x
TAP touch panel on either earpiece
LEFT RIGHT
OR
1x 1x
PAIRING NEW DEVICES
To manually enter pairing mode:
Remove right earpiece from case, press and hold
the touch panel for 10 seconds to power it off,
release the touch panel, then press and hold it again
for 5 seconds again until the blue and white lights
flash indicating pairing mode.
When removed from the charging case, the X20 will automatically enter Bluetooth
pairing mode if a previously paired device is not found. Select “MEE audio X20” in the
Bluetooth menu of the new device you wish to pair to complete the pairing process.
Select “MEE audio X20”
in the Bluetooth menu of
the new device you wish
to pair to complete the
pairing process.
Pairing mode is
indicated by flashing
alternating blue and
white lights
AT&T LTE 12:26 PM 95%
Bluetooth
Settings
MEE audio X20
Bluetooth
Earpiece Indicator Lights
Table des matières
Autres manuels MEE Casque audio
MEE
MEE AF18 Manuel utilisateur
MEE
MEE connect AF-T1 Manuel utilisateur
MEE
MEE T1H1 Manuel utilisateur
MEE
MEE Matrix 2 AF62 Manuel utilisateur
MEE
MEE Wave AF36 Manuel utilisateur
MEE
MEE M7P Manuel utilisateur
MEE
MEE X7 Manuel utilisateur
MEE
MEE M6 Manuel utilisateur
MEE
MEE T1M3 Manuel utilisateur
MEE
MEE MATRIX2 AF62 Manuel utilisateur
