Measurement Computing Us-1208fs Manuel utilisateur

USB-1208FS

Analog and Digital I/O

Document Revision 10A

July 2014

User's Guide

HM USB-1208FS.docx

Trademark and Copyright Information

Measurement Computing Corporation, InstaCal, Universal Library, and the Measurement Computing logo are

either trademarks or registered trademarks of MeasurementComputing Corporation. Refer to the Copyrights &

Trademarks section on mccdaq.com/legal for more information about Measurement Computing trademarks.

Other product and company namesmentioned herein are trademarks or trade names of their respective

companies.

reproduced, stored in a retrieval system, or transmitted, in any form by any means, electronic,mechanical, by

photocopying, recording, or otherwise without the prior written permission of Measurement Computing

Corporation.

Notice

Measurement Computing Corporation does not authorize any Measurement Computing Corporation product for

use in life support systems and/or devices without prior written consent from Measurement Computing

Corporation. Life support devices/systems are devices or systems that, a) are intended for surgical implantation

into the body, or b) support or sustain life and whose failure to perform can be reasonably expected to result in

injury. Measurement Computing Corporation products are not designed with the components required, and are

not subject to the testing required to ensure a level of reliability suitable for the treatment and diagnosis of

people.

Table of Contents

Preface

About this User's Guide .......................................................................................................................5

What you will learn from this user's guide .........................................................................................................5

Conventions in this user's guide .........................................................................................................................5

Where to find more information.........................................................................................................................5

Chapter 1

Introducing the USB-1208FS................................................................................................................6

USB-1208FS block diagram...............................................................................................................................6

Chapter 2

Installing the USB-1208FS....................................................................................................................7

What comes with your shipment?.......................................................................................................................7

Hardware .......................................................................................................................................................................... 7

Software............................................................................................................................................................................ 7

Documentation.................................................................................................................................................................. 7

Unpacking...........................................................................................................................................................7

Installing the software ........................................................................................................................................7

Installing the hardware .......................................................................................................................................7

Chapter 3

Functional Details .................................................................................................................................9

Analog input acquisition modes .........................................................................................................................9

Software paced.................................................................................................................................................................. 9

Hardware paced ................................................................................................................................................................ 9

External components ........................................................................................................................................10

USB connector.................................................................................................................................................................10

LED .................................................................................................................................................................................10

Screw terminals................................................................................................................................................................10

Signal connections............................................................................................................................................11

Analog input....................................................................................................................................................................11

Analog output ..................................................................................................................................................................14

Digital I/O........................................................................................................................................................................14

Counter input...................................................................................................................................................................15

Trigger input....................................................................................................................................................................15

SYNC I/O ........................................................................................................................................................................15

Calibration output............................................................................................................................................................16

Ground.............................................................................................................................................................................16

Power output....................................................................................................................................................................16

Accuracy...........................................................................................................................................................16

Synchronized operations...................................................................................................................................18

Mechanical drawings........................................................................................................................................19

Chapter 4

Specifications......................................................................................................................................20

Analog input.....................................................................................................................................................20

Analog output ...................................................................................................................................................22

Digital I/O.........................................................................................................................................................22

External trigger.................................................................................................................................................23

External clock input/output...............................................................................................................................23

Counter.............................................................................................................................................................24

Non-volatile memory........................................................................................................................................24

Microcontroller.................................................................................................................................................24

USB-1208FS User's Guide

Power................................................................................................................................................................25

General .............................................................................................................................................................25

Environmental ..................................................................................................................................................25

Mechanical .......................................................................................................................................................25

Screw terminal connector.................................................................................................................................26

Differential mode pinout..................................................................................................................................................26

Single-ended mode pinout ...............................................................................................................................................27

Declaration of Conformity..................................................................................................................28

Preface

About this User's Guide

What you will learn from this user's guide

This user's guide describes the Measurement Computing USB-1208FS data acquisition device and lists device

specifications.

Conventions in this user's guide

For more information

Text presented in a box signifies additional information and helpful hints related to the subject matter you are

reading.

Caution! Shaded caution statements present information to help you avoid injuring yourself and others,

damaging your hardware, or losing your data.

bold text Bold text is used for the names of objects on a screen, such as buttons, text boxes, and check boxes.

italic text Italic text is used for the names of manuals and help topic titles, and to emphasize a word or phrase.

Where to find more information

Additional information about the USB-1208FS is available on our website at www.mccdaq.com. You can also

contact Measurement Computing Corporation by phone, fax, or email with specific questions.

Knowledgebase: kb.mccdaq.com

Phone: 508-946-5100 and follow the instructions for reaching Tech Support

Fax: 508-946-9500 to the attention of Tech Support

Email: techsupport@mccdaq.com

Chapter 1

Introducing the USB-1208FS

The USB-1208FS-Plus is an analog input and digital I/O data acquisition device that provides the following

features:

Eight analog input channels that are software-selectable for either eight 11-bit single-ended inputs or four

12-bit differential inputs

Two 12-bit analog output channels

16 digital I/O channels that are independently-selectable as input or output in two 8-bit ports

32-bit event counter input for counting TTL pulses

External digital trigger input

Bidirectional terminal for external clocking or multi-unit synchronization

Screw terminals for field wiring connections

The USB-1208FS is powered by the 5 volt USB supply from your computer. No external power is required.

All I/O connections are made to the device screw terminals.

USB-1208FS block diagram

USB-1208FS functions are illustrated in the block diagram shown here.

Figure 1. USB-1208FS functional block diagram

Chapter 2

Installing the USB-1208FS

What comes with your shipment?

The following items are shipped with the USB-1208FS.

Hardware

USB-1208FS

USB cable

Software

MCC DAQ Software CD

Documentation

MCC DAQ Quick Start Guide

The Quick Start Guide booklet provides an overview of the MCC DAQ software you received with the device,

and includes information about installing the software. Please read this booklet completely before installing any

software or hardware.

Unpacking

As with any electronic device, take care while handling to avoid damage from static electricity. Before

removing the USB-1208FS from its packaging, ground yourself using a wrist strap or touch either the computer

chassis or other grounded object to eliminate any stored static charge. If the device is damaged, notify

Measurement Computing Corporation immediately by phone, fax, or email.

Knowledgebase: kb.mccdaq.com

Phone: 508-946-5100 and follow the instructions for reaching Tech Support

Fax: 508-946-9500 to the attention of Tech Support

Email: techsupport@mccdaq.com

For international customers, contact your local distributor. Refer to the International Distributors section on our

web site at www.mccdaq.com/International.

Installing the software

Refer to the Quick Start Guide for instructions on installing the software on the MCC DAQ CD. This booklet is

available in PDF at www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf.

Installing the hardware

Be sure you are using the latest system software

Before installing the device, run Windows Update to update your operating system with the latest HID and USB

drivers.

To connect the USB-1208FS to your system, connect the USB cable to a USB port on your computer or to an

external USB hub that is connected to your computer.

The USB-1208FS installs as a composite device with separate devices attached. When you connect the

USB-1208FS for the first time, a Found New Hardware dialog opens as each device interface is detected. This

is normal. After the device is installed its LED blinks and then remains on. This indicates that communication is

established between the USB-1208FS and your computer.

USB-1208FS User's Guide Installing the USB-1208FS

If the LED turns off

If communication is lost between the device and the computer, the LED turns off. To restore communication,

disconnect the USB cable from the computer and then reconnect it. This should restore communication, and the

LED should turn on.

Chapter 3

Functional Details

Analog input acquisition modes

The USB-1208FS can acquire analog input data in either software paced or hardware paced mode.

Software paced

The USB-1208FS acquires data one analog sample at a time using software-paced mode. You initiate the A/D

conversion by calling a software command. The analog value is converted to digital and returned to the

computer. You can repeat this procedure until you have the total number of samples that you want.

The maximum sample rate in software paced mode is system-dependent.

Hardware paced

The USB-1208FS can acquire data from up to eight channels using hardware-paced mode. The analog data is

acquired and converted to digital values until you stop the scan. Data is transferred in blocks of 31 samples from

the USB-1208FS to the memory buffer on your computer.

The A/D converter is paced by either an internal or external clock source.

The maximum sample rate is an aggregate rate. The total sample rate for all channels cannot exceed 50 kS/s.

The following table lists the sample rate when scanning from one to eight channels.

Maximum per channel sample rate

# channels scanned Sample rate (kS/s)

1 50

2 25

3 16.70

4 12.50

5 10

6 8.30

7 7.14

8 6.25

You can start a hardware-paced scan with a software command. Optionally, hardware-paced scans can be

delayed by an external hardware trigger event.

USB-1208FS User's Guide Functional Details

External components

The external components – screw terminal banks, LED, and USB connector –are shown in Figure 2.

1 Screw terminal pins 21 to 40 3 Screw terminal pins 1 to 20

2 LED 4 USB connector

Figure 2. External components

USB connector

The USB connector provides +5V power and communication. No external power supply is required.

LED

The LED indicates the communication status; it cannot be disabled. LED states are listed in the table below.

LED behavior

LED Illumination Indication

Steady green The USB-1208FS is connected to a computer or external USB hub.

Blinks continuously Data is being transferred.

Screw terminals

The screw terminals provide the following connections:

Eight analog inputs (CH0 IN to CH7 IN)

Two analog outputs (D/A OUT 0 to D/A OUT 1)

16 digital I/O connections (PortA0 to Port A7, and Port B0 to Port B7)

One external trigger input (TRIG_IN)

One external event counter input (CTR)

One SYNC I/O for external clocking and multi-unit synchronization (SYNC)

One calibration output (CAL)

One power output (PC +5 V)

Five analog ground connections (AGND) and four digital ground connections (GND)

One ground connection (GND)

Use 16 AWG to 30 AWG wire when making connections to the screw terminals. The single-ended mode pinout

is shown in Figure 3.

Table des matières

Autres manuels Measurement Computing Système d'E/S

Measurement Computing

Measurement Computing USB-1208HS Manuel utilisateur

Measurement Computing

Measurement Computing E-DIO24 Manuel utilisateur

Measurement Computing

Measurement Computing PCI-DAS08 Manuel utilisateur

Measurement Computing

Measurement Computing USB-3104 Manuel utilisateur

Measurement Computing

Measurement Computing USB-3102 Manuel utilisateur

Measurement Computing

Measurement Computing PCI-DAC6702 Manuel utilisateur

Measurement Computing

Measurement Computing USB-1608FS-Plus-OEM Manuel utilisateur

Measurement Computing

Measurement Computing CIO-DAS16/M1/16 Manuel utilisateur

Measurement Computing

Measurement Computing PCI-DAS4020/12 Manuel utilisateur

Measurement Computing

Measurement Computing USB-1616FS Manuel utilisateur

Measurement Computing

Measurement Computing USB-1608G-OEM Manuel utilisateur

Measurement Computing

Measurement Computing PCIM-DDA06/16 Manuel utilisateur

Measurement Computing

Measurement Computing USB 1024ls Mode d’emploi

Measurement Computing

Measurement Computing USB-1616HS-2 Manuel utilisateur

Measurement Computing

Measurement Computing USB-3101 Manuel utilisateur

Measurement Computing

Measurement Computing USB-1208HS-2AO Manuel utilisateur

Measurement Computing

Measurement Computing PCI-PDISO16 Manuel utilisateur

Measurement Computing

Measurement Computing PCI-DAS6030 Manuel utilisateur

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manuel utilisateur

Measurement Computing

Measurement Computing USB-1616HS-BNC Manuel utilisateur

Measurement Computing

Measurement Computing USB-1208FS-Plus Manuel utilisateur

Measurement Computing

Measurement Computing USB-1616HS Manuel utilisateur

Measurement Computing

Measurement Computing USB-1208LS Manuel utilisateur

Measurement Computing

Measurement Computing USB-1608FS Manuel utilisateur

Manuels Système d'E/S populaires d'autres marques

WAGO

WAGO 750-344 Manuel utilisateur

Teknim

Teknim TWM-1887 Mode d’emploi

Intelligent Appliance

Intelligent Appliance IA-2662-E Manuel utilisateur

BERGHOF

BERGHOF ECC DIO 16/16 Mode d’emploi

Advantech

Advantech PCM-27J3AU Manuel d'installation et d'exploitation

Festo

Festo CP-E08-M12-CL Manuel utilisateur

Hitachi

Hitachi HX-RIO3 Series Manuel utilisateur

NUUO

NUUO SCB-A08 Manuel utilisateur

M-system

M-system R3Y-RS8 Manuel utilisateur

jablotron

jablotron JB-110N Manuel utilisateur

Omron

Omron SYSMAC C200H Manuel utilisateur

DOLD

DOLD SAFEMASTER M Manuel utilisateur

ABB

ABB OPT-MF-001 Manuel utilisateur

Omron

Omron SYSMAC C2000H Manuel utilisateur

Helmholz

Helmholz TB20 Manuel utilisateur

ICP DAS USA

ICP DAS USA tM-AD2 Manuel utilisateur

Automationdirect.com

Automationdirect.com DL305 Manuel utilisateur

WAGO

WAGO I/O-SYSTEM 750 Manuel utilisateur

Measurement Computing us-1208fs Manuel utilisateur

Manuels Système d'E/S populaires d'autres marques