MB Connect Line mbNET.mini Series Guide de dépannage
Quick start-up guide EN
from rmware V 2.0.6 and HW 02 (Nov. 26th, 2019)
PROG. CNTLR.
E482663
8.002.702.02.00
MDH860, MDH861, MDH862 EU, MDH 862 AT&T,
MDH863, MDH 865, MDH 866 EU, MDH 866 AT&T, MDH 867
2
Table of contents
Safety instructions 3
Using Open Source Software 4
General Information 4
Special Liability Regulations 5
Used Open-Source Software 5
Included in delivery 6
Performance characteristics 8
Getting started 8
Initial conguration 9
Initial conguration via mbCONNECT24 V 1.7 10
Login mbCONNECT24 10
Adding a new device 10
Transfer conguration to the mbNET.mini 12
Initial conguration via RSP mbCONNECT24 V 2.x 13
Login mbCONNECT24 13
Creating a project 13
Create a device 14
Create the conguration 15
Transferring the conguration to the mbNET.mini 16
Transfer conguration to the mbNET.mini 17
Access the web interface of the mbNET.mini 18
Device State 19
Diagnostics 19
Tags 20
Loading the factory settings 21
Factory settings on delivery 22
Technical Data 22
3
This Quick Start Guide provides a quick Overview of selected operating procedures and
functions of the mbNET.mini industrial router. However, the detailed manual with the important
Notes and safety instructions can NOT be replaced by this document.
Read the following instructions carefully and keep this document in a safe. Latest information,
updates and the complete Manual, visit our website at www.mbconnectline.com.
NOTE: electrostatic discharge!
Observe the necessary safety
precautions when handling com-
ponents that are vulnerable
to electrostatic discharge (EN 61340-5-1 and
IEC 61340-5-1)!
The mbNET routers are maintenance-free
units.
If a mbNET router have damage or malfuncti-
on, the device must be immediately taken
out of service and secured against inadver-
tent operation.
The complete manual of the router as well
as the conformity declaration can be found
in the download area on our website
www.mbconnectline.com
• Only qualied specialist personnel may install,
start up, and operate the router. The national
safety and accident prevention regulations
must be observed.
• The router is built to the latest technological
standards and recognized safety standards
(see Declaration of Conformity).
• The router is only intended for operation in the
control cabinet and with SELV according to
IEC 60950/EN 60950/VDE 0805.
• The router may only be connected to devices,
which meet the requirements of EN 60950.
• The router is for indoor use only.
• Never open the router chassis. Unauthorized
opening and improper repair can pose a dan-
ger to the user. Unauthorized modications
are not covered by the manufacturer’s war-
ranty.
Opening up the device voids the warranty!
Safety instructions
4
Using Open Source Software
General Information
Our products contain, amongst others, so-called open-source software that is provided by third
parties and has been published for free public use. The open-source software is subject to special
open-source software licenses and the copyright of third parties. Basically, each customer can use
the open-source soft-ware freely in compliance with the licensing terms of the respective producers.
The rights of the customer to use the open-source software beyond the purpose of our products are
regulated in detail by the respective concerned open-source software licenses. The customer use
the open-source software freely, as provided in the respective eective license, beyond the pur-
pose that the open-source software gets in our products. In case there is a contradiction between
the licensing terms for one of our products and the respective open-source software license, the
respective relevant open-source software license takes priority over our licensing terms, as far as
the respective open-source software is concerned by this.
The use of the used open-source software is possible free of charge. We do not demand usage
fees or any comparable fees for the use of the open-source software contained in our products.
The use of the open-source software in our products by the customer is not part of the earnings we
achieve with the contractual compensation.
All open-source software programs contained in our products can be taken from the available list.
The most important open-source software licenses are listed in the Licenses section at the end of
this publication.
As far as programs contained in our products are subject to the GNU General Public License
(GPL), GNU Lesser General Public License (LGPL), the Berkeley Software Distribution (BSD),
the Massachusetts Institute of Technology (MIT) or another open-source software license, which
regulates that the source code must be made available, and if this software is not already delivered
in source code on a data carrier with our product, we will send you this at any time upon request.
If it is required to send this on a data carrier, the sending will be made against pay-ment of a cost
compensation of € 35,00. Our oer to send the source code upon request ceases automatically
three years after delivery of our product to the customer.
5
Requests must be directed to the following address, if possible under specication of the serial
number:
MB CONNECT LINE GMBH Tel. +49 (0) 98 51 / 58 25 29 0
Fernwartungssysteme Fax +49 (0) 98 51 / 58 25 29 99
91550 Dinkelsbühl
GERMANY
Special Liability Regulations
We do not assume any warranty or liability, if the open-source software programs contained in our
product are used by the customer in a manner that does not com-ply any more with the purpose
of the contract, which is the basis of the acquisition of our product. This concerns in particular any
use of the open-source software programs outside of our product. The warranty and liability regula-
tions that are pro-vided by the respective eective open-source software license for the respective
open-source software as listed in the following are eective for the use of the open-source software
beyond the purpose of the contract. In particular, we are not liable, if the open-source software
in our product or the complete software congu-ration in our product is changed. The warranty
granted with the contract, which is the basis of the acquisition of our product, is only eective for
the unchanged open-source software and the unchanged software conguration in our product.
Used Open-Source Software
For a list of the open-source software used in this product see
https://www.mbconnectline.com/downloads/open-source-software-licenses.txt
6
Included in delivery
Should any of these parts are
missing or damaged, please
contact the following address:
MB connect line GmbH
Winnettener Str. 6
91550 Dinkelsbühl
GERMANY
Tel.: +49 (0)9851/582529-0
Fax: +49 (0)9851/582529-99
www.mbconnectline.com
Please check that your delivery is complete:
Please keep the original box and the original packaging in case
you need to send the device for repair at a later date.
MDH 860 MDH 861 MDH 862 (EU/AT&T)
7
Item No.: 8.002.702.02.00
Quick start guide
Item No.: 8.002.101.00.00
GSM
antenna WiFi antenna
Item No.: 8.002.108.00.00
MDH 863 MDH 865 MDH 866 (EU/AT&T) MDH 867
8
Performance characteristics
Getting started
● The router can be fully congured via the portal (my)mbCONNECT24.
● Can connect to machines and systems via LAN, WAN, WiFi or modem.
● Deployable worldwide using mobile communications plus access via LAN and Internet.
● Secure connection using an integrated rewall with IP lter, NAT, port forwarding and VPN
with Blowsh encryption.
● Two digital inputs to initiate the connection to the portal server or send a warning text mes-
sage/email.
Depending on the device, connect an antenna, and insert a SIM card.
Before connecting the device to a network or PC, rst ensure that it is properly connected to a
power supply, otherwise it may cause damage to other equipment.
Connect equipotential bonding to the functional earth (FE).
Connect the mbNET.mini to a power supply (DC 10 – 30 V).
Make sure the polarity is correct!
After turning on the power supply, the LED Pwr lights up.
As soon as the system has been checked and
started (duration approx. 25 sec), the Rdy LED
ashes for the duration of the starting up pro-
cess (approx. 90 sec).
The mbNET.mini is now ready for operation.
T 0 T + 25 Sek. T + 90 Sek.
Pwr
Rdy
Con
Usr
Pwr
Rdy
Con
Usr
Pwr
Rdy
Con
Usr
9
Initial conguration
Requirements:
● You have a user account on the web portal mbCONNECT24 V 1.7.x
or the Remote Service Portal RSP mbCONNECT24 V 2.x
If you do not have a user account on mbCONNECT24, please contact your system administra-
tor or authorized sales partner.
For more information about mbCONNECT24 see www.mbconnectline.com in our Download
Portal.
● Windows PC with remote client software mbDIALUP * installed .
With mbDIALUP you establish a secure VPN connection to mbCONNECT24.
* The latest version can be downloaded on www.mbconnectline.com
Generally following procedure applies:
● Add the mbNET.mini in the portal mbCONNECT24 as a new device.
● Enter the necessary basic data, so that the device can connect to the portal (for example,
device name, network settings, connection information, etc.).
● Transfer the device conguration from the portal into the mbNET.mini.
● After the mbNET.mini has been connected to the portal, it can be congured completely
there.
More information about conguring devices, see the mbNET.mini Manual (download under
www.mbconnectline.com) or in the mbCONNECT24 online help.
10
Initial conguration via mbCONNECT24 V 1.7
Adding a new device
Login mbCONNECT24
VPN VPN
mbDIALUP
For the initial conguration following information / settings are necessary:
• Description: Device Name and Type
• Network: LAN IP and LAN Netmask bzw. WiFi settings
• Internet: WiFi WAN Settings
ADVICE!
Change unconditionally and without delay the default login information!
Ce manuel convient aux modèles suivants
10
Table des matières
Autres manuels MB Connect Line Routeur réseau
MB Connect Line
MB Connect Line mbNET Series Guide de dépannage
MB Connect Line
MB Connect Line mbNET MDH859 Guide de dépannage
MB Connect Line
MB Connect Line mbNET.rokey Series Guide de dépannage
MB Connect Line
MB Connect Line mbNET.mini Manuel utilisateur
MB Connect Line
MB Connect Line mbNET Series Manuel utilisateur
Manuels Routeur réseau populaires d'autres marques
NETGEAR
NETGEAR FS526T - Switch Manuel utilisateur
Korenix
Korenix JetNet 5710G Series Manuel utilisateur
Automated Logic
Automated Logic ZN551 Manuel du propriétaire
Cisco
Cisco ASR 1000 Series Manuel de l'opérateur
EnGenius
EnGenius ESR-9710 Manuel utilisateur
Cisco
Cisco 805 Series Instructions d'utilisation et de sécurité