MaxxMar Domlux Manuel d'installation
MAXX MOTORS
by
OPERATION AND PROGRAMMING INSTRUCTIONS
JANUARY 2018
3
New Generation Maxx Motors
(with Bluetooth)
Solo – A1 4-5
Domlux 6-8
Cool Motion 6-8
HWM-10 6-8
HWM-20 6-8
MaxxLink Controller 8
Bluetooth Connection Instructions 9-13
Original Maxx Motors
(without Bluetooth)
Solo – A1 14-15
Domlux 16-17
Cool Motion 16-17
MaxxLink Controller 18
Remote Transmitters 19
4
Types of Button Presses
Click Press and release
Hold Press and hold for specied time
Double-Click Two clicks in less than 3/4 of a second
New Generation Maxx Motors with Bluetooth
Operation & Programming Instructions
Solo-A1 - New Generation Smart Motor
• New and Quieter Generation Smart Motor with Bluetooth
• Rechargeable Wand Control System with Internal Battery Motor
• 12V DC with Battery charger
1. Reference
1- The motor will stop on button release tf the ltmtt ts not yet set.
2- The motor will take no action if the favourite position is not yet set.
Up
Set
Down
Pressing and holding up for 2 seconds will bring
your blind in the up position.
Pressing the up button will jog your blind 1/8 of
an inch in the upward position.
Pressing and holding the down button will bring
your blind down to the lower position.
Pressing the down button will jog your blind 1/8
of and inch in the downward.
Double click the up button will bring your blind to
the favourite position 1.
Double click the down button will bring your
blind to the favourite position 2.
2. Basic Operations
Wand Buttons and Controls
Visit link: neosmartblinds.com/motors-accessories/
5
Command Description Key Combination
Enter-Settings-Mode Put the motor into Settings Mode. (The motor will jog, and LED
will turn ON.)
Hold SET for 5 seconds3or
Hold HEAD for 3 seconds3
Leave-Settings-
Mode
Return the motor to Normal Mode. (This will happen automati-
cally if no action is taken for 30 seconds. LED will turn OFF.)
Enter-Settings-Mode, then
Click SET
Adjust-Upper-Limit Start the process of setting the motor's upper rotational limit.
(See Limit Setting Process below)
Enter-Settings-Mode, then
Click UP
Adjust-Lower-Limit Start the process of setting the motor's lower rotational limit.
(See Limit Setting Process below)
Enter-Settings-Mode, then
Click DOWN
Save-Limit End the limit setting process, and save the limit at the current
position. (See Limit Setting Process below)
Adjust-Upper-Limit or
Adjust-Lower-Limit, then
Click SET3
Reverse-Rotation Reverse the direction of rotation. i.e. switch up and down. Enter-Settings-Mode, then
Hold SET for 5 seconds3
Set-Favourite-1 Set favourite position 1 at this position.
(See Setting Favourite Positions below)
Double-Click SET, then
Double-Click UP34
Set-Favourite-2 Set favourite position 2 at this position.
(See Setting Favourite Positions below)
Double-Click SET, then
Double-Click DOWN3 4
3. Advanced Operations
Limit Setting Process
The motor’s upper and lower rotational limits are set individually. To set a limit:
1. Hold SET for 5 seconds (Enter-Settings-Mode).
2. Choose the limit to set. Click UP (Adjust-Upper-Limit) to adjust the upper limit, or Click DOWN (Adjust-Lower-
Limit) to adjust the lower limit.
3. Adjust the motor to the desired limit position using the UP and DOWN buttons.
4. Click SET to save the limit at this new position (Save-Limit). The motor will jog back-and-forth to conrm the that
the new limit has been saved.
Setting Favourite Positions
Once the upper and lower limits are set, the motor can store two favourite (intermediate) positions.
To set one of these positions:
1. Move to the position you want to store as a favourite position using UP and DOWN.
2. Use Set-Favourite-1 or Set-Favorite-2 to save. The motor will jog back-and-forth to conrm.
You can also clear a favourite position by setting it at the same place again. For example, to delete favourite position
1:
1. Move to that stored favourite position using GoTo-Favorite-1.
2. Call Set-Favourite-1 to delete. The motor will jog back-and-forth to conrm.
Note: you cannot set favourite positions until after the upper and lower limits are both set.
3- The motor will Jog back-and-forth after this command.
4- This entire key sequence must be completed within 10 seconds.
6
Types of Button Presses
Click Press and release
Hold Press and hold for
specied time
Double-Click Two clicks in less than
3/4 of a second
The following operation and programming instructions
apply to the following New Generation Maxx Motors:
Domlux
New and Quieter Generation
Smart Motor with Bluetooth
Motor with Transformer and Remote
Control plugs into Electrical Outlet
24V DC Low Voltage with
Transformer
Command Description Key Combination
Go-Up Move all the way to the upper limit.1Click UP
Go-Down Move all the way to the lower limit.1Click DOWN
Stop Stop ongoing motion. Click STOP
Step-Up Move the motor up a small amount. Click LEFT
Step-Down Move the motor down a small amount. Click RIGHT
Go-To-Favorite-1 Move the motor to favourite position 1. Hold LEFT for 2 seconds
Go-To-Favorite-2 Move the motor to favourite position 2. Hold RIGHT for 2 seconds
Next-Channel2 Cycle to the next channel (or group of channels) on the
remote, making it active.
Click CHANNEL
1. Reference
1- The motor Will stop on button release if the not yet set.
2- This command is not sent to the motor, and affects only the remote.
2. Basic Operations
Cool Motion
New and Quieter Generation
Smart Motor with Bluetooth
Rechargeable Internal Battery
Motor with Remote Control
12V DC with battery charger
HWM-10 & HWM-20
New and Quieter Generation
Smart Motor with Bluetooth
Hardwire - 110V AC Motor
Unless noted, all commands are sent from a remote control to a motor, and will only have effect if the remote control’s
active channel has been paired with the target motor. (See Pairing Process below)
Ch: 1
Ch: 3
Ch: 2
Ch: 4
Ch: 5
Ch: 6
Stop
Jog Down/
Favourite
position 2
Up
Jog Down/Favourite position 1
Down
Channel
Selection
Set
Note: ALL 4 MOTORS - DOMLUX,
COOL MOTION, HWM-10 & HWM-20
WORK WITH BLUETOOTH
7
3. Advanced Operations
Enter Setting Mode
• Put the motor into Settings Mode by Hold SET button for 3 seconds: the red LED light will turn on indicating the blind
is in setting mode.
Pairing a channel
• To pair a remotes active channel with a motor: you must rst place the motor in setting mode by pressing the set
button located on the motor. Once the motor is in setting mode, make sure the remote is on the active channel that
you want to program. Once that’s conrmed, press the set button located on the back of the remote.
Deleting channels
• To delete all paired remotes from the motor: you must press and hold the set option located on the motor for seven
seconds (note: this does not delete limits or favourite positions ). The blind will jog twice indicating that paired
remotes are no longer paired.
Setting The Upper Rotational Limit
• To set the upper rotational limit: you must press the up and set option at the same time for 3 seconds (note: remote
must st be paired to the blind your trying to set the limit for). Once blind is in the limit mode, you may press up or
down depending on the length that you want the upper limit to be at. Once the blind is at the correct level, you may
press the set option located in the back of the remote to save that position.
Setting the lower rotational limit
• To set the lower rotational limit: you must press the down and set option at the same time for 3 seconds (note:
remote must rst be paired to the blind your trying to set the limit for). Once blind is in the limit mode, you may press
up or down depending on the length that you want the lower limit to be at. Once the blind is at the correct level you
may press the set option located in the back of the remote to save that position.
Deleting limits
• To delete favourite position and limits: press the stop button and set located in the back of the remote at the same
time for 3 seconds (note: make sure the remote is programmed to the blind on which you want to erase limits and
favourite positions).
New Generation MaxxMotors (Domlux, Cool Motion, HWM-10, HWM-20)
New and Quieter Generation Smart Motor with Bluetooth
Visit link: neosmartblinds.com/motors-accessories/
8
New Generation MaxxMotors (Domlux, Cool Motion, HWM-10, HWM-20)
New and Quieter Generation Smart Motor with Bluetooth
Reverse rotation correction
• To Reverse the rotation of the blind: you must rst place the blind in set mode. You may do this by pressing and
holding the set button located on the back of the remote. Once the remote is in setting mode press channel
selection and stop at the same time. Your blind should jog once indicating the rotation is now reversed (Note:
if your up button is bringing the blind in a downward position or the down button bringing your blind in
the upward position - reversing the rotation should correct the issue)
Setting Favourite Position 1
• To save favourite position 1: make sure your blind is in the position that you are trying to save it at. Press the
left button and the set on the back of the remote at the same time blind should jog once indicating that Favourite
Position is saved.
Setting Favourite Position 2
• To save favourite position 2: make sure your blind is in the position that you are trying to save it at. Press the
right button and the set on the back of the remote at the same time blind should jog once indicating that Favourite
Position is saved.
MaxxLink Controller for New Generation Maxx Motors
State-of-the-art WiFi Technology allows you to control your
shades from anywhere in the world:
• Easy to connect with an Android or iPhone
• Compatible with Control 4 smart home system
• Can be used with Maxx Motor with remote control
Quick Start Instructions
Step 1 Download the app by searching “Neo Smart Blinds”
on the Android Play Store or iTunes App Store.
Step 2 Create an account using a valid email.
IMPORTANT! When creating your account, choose
setup code:
MA432
Step 3 Follow the in-app, animated instructions.
Troubleshooting
Visit the link below for detailed instructions.
http://neosmartblinds.com/smartcontroller-help/
9
Blue Link – Overview
BLUETOOTH SECTION - SEE LINK: neosmartblinds.com/bluelink/
No monthly or hidden fees
No need to connect to your Wi- or router
Key features
• Direct smart phone control
• Blinds position indicator
• Battery level and signal strength indicator
• Blind control using swipe or control buttons
Tech Specs
Neo Smart Blinds Blue Link technical specication
With our mobile app you will be able to:
• Set up your blinds using the built-in guide
• Control your blinds individually
(or as a group, coming soon)
• Set schedules to automate your home
• Put blinds into energy savings mode
(coming soon)
Antenna
Micro USB/wand port/charging port
Bluetooth port
Red led light
Set/program
Set/program - use to program motor to a remote erase memory and save functions
Red led light - indicating motor is in program mode
Bluetooth port - used to install Bluetooth adapter
Micro USB/wand port/charging port - used to charge motor or used as port for wand control
Antenna - used to receive signal from remote control
MaxxLink Controller for New Generation Maxx Motors
10
Troubleshooting
Visit the link below for detailed instructions.
http://neosmartblinds.com/smartcontroller-help/
Getting Started
1. Dowload the app
Using your phone or a tablet, download and install the Neo
Smart Blinds Blue App.
Neo Smart Blinds Blue Link App Download Google Play
AndroidNeo Smart Blinds Blue Link App Download App Store
Apple Ios
2. No account is needed
No need to create and account, you are ready to start the
claiming your blinds.
Claiming a blind
Claiming a blind is easy and the app has a step by step for this
process. Below you will nd a more detailed explanation about
claiming a blind. Before starting, make sure that:
• Each blind has a Neo Blue Link connected to it.
• The Bluetooth of your device is enable.
1. Tap to claim
Tap on Tap to claim of an unclaimed blind. The app will open
the step by step to claim a blind and will automatically connect
to the blind.
2. Identify blind
Use the button Identify blind to make sure you are pairing
the right blind. The motor will jog back and forth, so you can
visually identify the blind.
3. Conrm blind
If you are in the correct blind, tap the Next button. If not, tap the
return icon (upper left of the screen) and go to step 1.
4. Press and hold button until it jogs
Press and hold the small button on the side of the blind until it
jogs. You can use the motor’s antenna (white wire) to press the
button. For a second method to pair the blind, please follow the
instructions in the app.
5. Name the blind
Give a name to the blind, it will help you to nd it later in the
blind’s list.
Adjusting upper and
lower limit
Please note that this is an advanced settings and not all blinds
will need to be adjusted. Most installers will adjust each blind
during the installation process. Setting a new limit will overwrite
the old one.
1. Choose a blind
Tap on the blind you want to adjust the limits.
2. Tap on the more menu
The more menu (three dots) is located in the upper right side
of the screen.
3. Choose the limit you need to adjust
Choose to adjust either the upper or lower limit and tap on the
option
4. Adjust the limit
Use the buttons available to adjust the upper/lower limit.
5. Set limit
When the blind is in the desired position, tap on the button set
limit.
Reversing the direction of a blind
If a blind moves to the opposite direction to your command,
then you need to switch up and down in order to use your blind
properly. To make this change, follow the steps below:
1. Tap to connect
Tap on Tap to connect of the blind you need to reverse the
direction.
2. Tap on the more menu
The more menu (three dots) is located in the upper right side
of the screen.
3. Tap on Reverse direction and conrm
Tap on the Reverse direction option, and then, tap on Conrm
Controlling the blind
You can either control your blind by swiping up and down on
the window frame or by tapping on the buttons below it.
Use the button Show Help to learn what each button does.
Setting a favorite position
1. Tap to connect
Tap on Tap to connect of the blind you want to set a favorite
position
2. Choose a position
In the blind control, to the right of the window frame, you can
set a favorite position to the blind. Just tap and hold the dot,
then move it to the desired position and release. You can
change the favorite position of your blind any time you want.
3. Set your blind to a favorite position
To put your blind in the favorite position, tap on the heart icon
11
Creating a new schedule
1. Access the Schedule tab
Tap on the blind you want to create a new schedule, then tap
on the Schedule tab.
2. Tap on the plus button
On the bottom of the page, tap on the blue button with a plus
in it.
3. Choose position, time and days
On the window frame, swipe your nger down to set the
blind position. Tap on the Choose time to select the time. The
time is in 12 hours format, don’t forget to choose AM or PM
to set the time properly. Choose when the schedule will run
automatically. The default setting is all days of the week, so tap
on the days you don’t want to add this schedule.
4. Save the schedule
If you want, you can preview the blind’s position for this
schedule. Use the preview button for this. Tap on the Save
button to save you schedule.
Adding a recently created schedule to
another blind
The app saves the last 4 schedules you have created. To copy
and paste these schedules to your blinds, follow the steps
below:
1. Connect to a blind and tap on the Schedule tab
Choose a blind in your blind list, tap on Tap to connect and
then, tap on the Schedule tab.
2. Using the blue button, tap on one existing schedule
On the bottom of the page, tap on the blue button on the
bottom of the page. Then, tap on one existing schedule of the
list to add to the blind.
3. Repeat to add more existing schedules the blind
Repeat the steps 3 and 4 to add more existing schedules to
the blind. You can have up to 4 schedules per blind.
Deleting a schedule
There are two methods to delete a schedule:
Method 1
1. Connect to a blind and tap on the Schedule tab
Tap on Tap to connect of the blind you want to delete the
schedule from, and then, tap on the Schedule tab.
2. Tap and hold the schedule to delete
Tap and hold the schedule you want to delete. Conrm by
tapping on Delete.
Method 2
1. Connect to a blind and tap on the Schedule tab
Tap on Tap to connect of the blind you want to delete the
schedule from, and then, tap on the Schedule tab.
2. Tap on schedule, then use the trash icon to delete it
Tap on the schedule you want to delete, then tap on the trash
can icon. Tap on Conrm to permanently delete the schedule.
Changing the name of a blind
1. Connect to a blind and tap on the more menu
Tap on Tap to connect of the blind you need to change the
name, then tap on the more menu. The more menu (three
dots) is located in the upper right side of the screen.
2. Tap and Rename option and rename your blind
Tap on the Rename option. Enter the new name, then, tap on
save.
Deleting/Unclaiming a blind.
After deleting a blind, you will need to claim/pair the blind again
in order to use it. Be sure you need to delete the blind. Use this
link if you only need to change the name of the blind and this
link to learn how to claim/pair a blind.
There are two methods to delete a blind:
Method 1
1. Choose the blind, tap and hold
In the blind list, tap and hold for some seconds the blind you
want to delete.
2. Conrm
Conrm by tapping on Delete/Unclaim.
Method 2
1. Connect to a blind and tap on more menu
Tap on Tap to connect of the blind you need to change the
name, then, tap on the more menu. The more menu (three
dots) is located in the upper right side of the screen.
2. Tap on the Unclaim/Delete and conrm
Tap on the Unclaim/Delete option. Tap on Conrm to
permanently delete the blind.
Show/Hide unclaimed blinds
After claiming all your blinds in the app, you can hide the
unclaimed blinds lists that is visible on the bottom of your
claimed blinds list. To do it so, follow the steps below.
1. Tap on the menu
The menu is located in the upper left corner of the app.
2. Turn off “Show unclaimed blinds”
Find the setting Show unclaimed blinds. Turn off the switch by
either swiping or tapping on it.
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels MaxxMar Store vénitien
Manuels Store vénitien populaires d'autres marques
Domondo
Domondo PureNight Manuel d'instructions d'installation
rollease acmeda
rollease acmeda Easy Spring Air Guide de configuration
IKEA
IKEA KADRILJ Manuel utilisateur
Hallis Hudson
Hallis Hudson Rolls Super glide Manuel utilisateur
Benthin
Benthin P1614 Manuel utilisateur
MV LINE
MV LINE CLARA 015 Mode d’emploi
