Maxtor Quickview 40 Manuel utilisateur

Quickview 40 20/30/40GB AT

Product Manual

May 24, 2005

Part Number: 000001925

could include technical inaccuracies or typographical errors. Changes are periodically made

to the information herein – which will be incorporated in revised editions of the publication. Maxtor may

make changes or improvements in the product(s) described in this publication at any time and without

notice.

UL/CSA/VDE/TUV/RoHS

UL standard 1954 recognition granted under File No. E78016

CSA standard C22.2-950 certification granted under File No. LR49896

TUV Rheinland EN 60 950

Tested to FCC Rules for Radiated and Conducted Emissions, Part 15, Sub Part J, for Class-B Equipment.

Quickview 40 model numbers 6K020/030/040L0 meet the EU directive for the Restriction and Use of

Hazardous Substances (RoHS), 2002/95/EC of the European Parliament and the council of 27 January,

2003.

PATENTS

These products are covered by or licensed under one or more of the following U.S. Patents:

4,419,701; 4, 538,193 4,625,109; 4,639,798; 4,647,769; 4,647,997; 4,661,696; 4,669,004; 4,675,652;

4,703,176; 4,730,321; 4,772,974; 4,783,705; 4,819,153; 4,882,671; 4,920,442; 4,920,434; 4,982,296;

5,005,089; 5,027,241; 5,031,061; 5,084,791; 5,119,254; 5,160,865; 5,170,229; 5,177,771; Other U.S. and

Foreign Patents Pending.

Maxtor®, MaxFax®are registered trademarks of Maxtor Corporation, registered in the U.S.A. and other

countries. Quickview 40, AutoTransfer, AutoRead, AutoWrite, DisCache, DiskWare, Defect Free Inter-

face, and WriteCache are trademarks of Maxtor Corporation. All other brand names or trademarks are the

property of their manufacturers.

Maxtor reserves the right to make changes and improvements to its products, without incurring any obliga-

tion to incorporate such changes or improvements into units previously sold or shipped.

This product or document is protected by copyright and distributed under licences restricting its use, copy-

ing, distributing, and decompilation. No part of this product or document may be reproduced in any form

by any means without prior written authorization of Maxtor and its licensors, if any.

RESTRICTED RIGHTS LEGEND: Use, duplication, or disclosure by the government is subject to

restrictions as set forth in subparagraphs (c)(1)(ii) of the Rights in Technical Data and Computer Software

clause at DFARS 252.227-7013 and FAR 52.227-19.

THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

OF MERCHANTABILITY, FITNESS FOR A PARTIULAR PURPOSE, OR NON-INFRINGE-

MENT.

You can download Maxtor publications directly from Maxtor at, www.maxtor.com

Part Number: 000001925

Before You Begin: Thank you for your interest in Maxtor hard disk drives. This manual provides technical

information for OEM engineers and systems integrators regarding the installation and use of Maxtor hard

drives. Drive repair should be performed only at an authorized repair center. For repair information, contact

the Maxtor Product Support Center at 1-800-2MAXTOR.

CAUTION: Maxtor hard drives are precision products. Failure to follow these precautions and guidelines

outlined here may lead to product failure, damage and invalidation of all warranties.

1BEFORE unpacking or handling a drive, take all proper electrostatic discharge (ESD) precau-

tions, including personnel and equipment grounding. Stand-alone drives are sensitive to

1 electrostatic discharge (ESD) damage.

2BEFORE removing drives from their packing material, allow them to reach room temperature.

3 During handling, NEVER drop, jar, or bump a drive.

4 Once a drive is removed from the Maxtor shipping container, IMMEDIATELY secure the

drive through its mounting holes within a chassis. Otherwise, store the drive on a padded,

grounded, antistatic surface.

5NEVER switch DC power onto the drive by plugging an electrically live DC source cable into

the drive's connector. NEVER connect a live bus to the drive's interface connector.

6ELECTRICAL GROUNDING - For proper operation, the drive must be securely fastened to

a device bay that provides a suitable electrical ground to the drive baseplate.

Please do not remove or cover up Maxtor factory-installed drive labels. They contain information required

should the drive ever need repair.Thank you for your interest in Maxtor hard disk drives. This manual pro-

vides technical information for OEM engineers and systems integrators regarding the installation and use of

Maxtor hard drives. Drive repair should be performed only at an authorized repair center. For repair infor-

mation, contact the Maxtor Customer Service Center at 800-2MAXTOR or 1-303-678-2015.

Corporate Headquarters:

500 McCarthy Blvd.

Milpitas, California 95035

Tel: 408-894-5000

Fax: 408-362-4740

Quickview 40 20/30/40GB AT i

Table of Content

Chapter 1

INTRODUCTION

1.1 MAXTOR CORPORATION................................................................. 1-1

1.2 AUDIENCE ..................................................................................... 1-1

1.3 MANUAL ORGANIZATION.................................................................1-2

1.4 TERMINOLOGY AND CONVENTIONS................................................. 1-2

1.5 REFERENCES.................................................................................. 1-4

Chapter 2

PRODUCT DESCRIPTION

2.1 PRODUCT DESCRIPTION.................................................................. 2-1

2.2 KEY FEATURES .............................................................................. 2-1

2.3 REGULATORY COMPLIANCE STANDARDS ........................................ 2-3

2.4 HARDWARE REQUIREMENTS ........................................................... 2-3

Chapter 3

PRODUCT SPECIFICATIONS

3.1 MODELS AND CAPACITIES.............................................................. 3-1

3.2 DRIVE CONFIGURATION .................................................................. 3-1

3.3 PERFORMANCE SPECIFICATIONS ..................................................... 3-2

3.4 PHYSICAL DIMENSIONS .................................................................. 3-2

3.5 POWER REQUIREMENTS.................................................................. 3-3

3.6 POWER MODE DEFINITIONS ............................................................ 3-3

3.7 EPA ENERGY STAR COMPLIANCE .................................................... 3-3

3.8 ENVIRONMENTAL LIMITS ................................................................ 3-4

3.9 SHOCK AND VIBRATION ................................................................. 3-5

3.10 RELIABILITY SPECIFICATIONS......................................................... 3-6

3.11 EMC/EMI ...................................................................................... 3-7

3.11.1 RADIATED ELECTROMAGNETIC FIELD EMISSIONS - EMC COMPLI-

ANCE......................................................................................3-7

3.11.2 CANADIAN EMISSIONS STATEMENT .......................................3-7

3.12 SAFETY REGULATORY COMPLIANCE .............................................. 3-7

3.13 RoHS COMPLIANCE ........................................................................3-7

Table of Contents

ii Quickview 40 20/30/40GB AT

Chapter 4

INSTALLATION

4.1 SPACE REQUIREMENTS................................................................... 4-1

4.2 UNPACKING INSTRUCTIONS............................................................ 4-2

4.3 HARDWARE OPTIONS ..................................................................... 4-5

4.3.1 CABLE SELECT (CS) JUMPER ....................................................4-6

4.3.2 DRIVE SELECT (DS) JUMPER ....................................................4-7

4.3.3 MASTER JUMPER CONFIGURATION ..........................................4-7

4.3.4 JUMPER PARKING (PK) POSITION .............................................4-7

4.3.5 ALTERNATE CAPACITY (AC) ....................................................4-8

4.4 ATA BUS ADAPTER ........................................................................ 4-9

4.4.1 40-PIN ATA BUS CONNECTOR ..................................................4-9

4.4.2 ADAPTER BOARD ....................................................................4-9

4.5 MOUNTING .................................................................................. 4-10

4.5.1 ORIENTATION .......................................................................4-10

4.5.2 CLEARANCE .........................................................................4-12

4.5.3 VENTILATION ........................................................................4-12

4.6 COMBINATION CONNECTOR (J1)................................................... 4-12

4.6.1 DC POWER (J1, SECTION A) ...................................................4-13

4.6.2 EXTERNAL DRIVE ACTIVITY LED .............................................4-13

4.6.3 ATA BUS INTERFACE CONNECTOR (J1, SECTION C) ................4-13

4.7 FOR SYSTEMS WITH A MOTHERBOARD ATA ADAPTER................... 4-14

4.8 FOR SYSTEMS WITH AN ATA ADAPTER BOARD ............................. 4-14

4.8.1 ADAPTER BOARD INSTALLATION ...........................................4-14

4.9 TECHNIQUES IN DRIVE CONFIGURATION........................................ 4-17

4.9.1 THE 528-MEGABYTES BARRIER ..............................................4-17

4.9.2 THE 8.4-GIGABYTES BARRIER ................................................4-17

4.9.3 OPERATING SYSTEM LIMITATIONS .........................................4-18

4.10 SYSTEM STARTUP AND OPERATION ............................................ 4-18

Chapter 5

ATA BUS INTERFACE AND ATA COMMANDS

5.1 INTRODUCTION.............................................................................. 5-1

5.2 MECHANICAL INTERFACE ............................................................... 5-1

5.2.1 SIGNAL CABLE AND CONNECTOR .............................................5-1

5.3 ELECTRICAL INTERFACE ................................................................. 5-1

5.3.1 ATA BUS INTERFACE ...............................................................5-1

5.4 REGISTER ADDRESS DECODING ...................................................... 5-2

5.5 COMMAND INTERFACE................................................................... 5-2

5.5.1 GENERAL FEATURE SET ...........................................................5-2

5.5.2 SUPPORTED COMMANDS ........................................................5-2

Table of Contents

Quickview 40 20/30/40GB AT iii

Chapter 6

SERVICE AND SUPPORT

6.1 PRODUCT SUPPORT/TECHNICAL ASSISTANCE/CUSTOMER SERVICE. 6-1

Glossary................................................................................................G-1

Quickview 40 20/30/40GB AT iii

List of Figures

Figure 4-1 Mechanical Dimensions...........................................................4-1

Figure 4-2 Single-Pack Shipping Container ..............................................4-3

Figure 4-3 25-Pack Shipping Container ...................................................4-4

Figure 4-4 Jumper Locations on the Interface Connector ..........................4-5

Figure 4-5 AT Connector and Jumper Location ........................................4-8

Figure 4-6 Mounting Screw Clearance .....................................................4-9

Figure 4-7 Mounting Dimensions ......................................................... 4-10

Figure 4-8 J1 DC Power and ATA Bus Combination Connector ................4-11

Figure 4-9 Drive Power Supply and ATA Bus Interface Cables ................. 4-14

Figure 4-10 Completing the Drive Installation ..........................................4-15

Quickview 40 20/30/40GB AT iv

List of Tables

Table 4-1 AT Jumper Option.........................................................................4-6

Table 4-2 J1 Power Connector, Section A......................................................4-12

Table 4-3 Logical Addressing Form.................................................................4-19

Table 5-1 Supported Commands.................................................................... 5-2

Table 5-2 Identify Drive Command Parameters.....................................................5-

Quickview 40 20/30/40GB AT 1-1

Chapter 1

Introduction

1.1 Maxtor Corporation

Maxtor corporation is one of the world’s largest suppliers of hard disk

drive products-products that help store the digital world for millions of

users. Maxtor products serve a range of markets, including personal and

entertainment, small office/home office, mid-sized business and

enterprise

Products

Maxtor storage products include drives and accessories for PC’s,

workstations, RAID products, enterprise applications, enterprise servers,

high-end systems, consumer electronics and personal storage.

Support

Maxtor provides a variety of consumer support options, all designed to

make sure the user gets fast, helpful, accurate information to help resolve

any difficulties. These options include a broad, searchable knowledge

base of FAQ’s, product manuals, installation guides, information on

previously resolved problems, software downloads, and contact by

phone or E-mail with a support person. For more information, visit

www.maxtor.com/en/support.

1.2 Audience

The Quickview 40 20/30/40GB AT product manual is intended for

several audiences. These audiences include: the end user, installer,

developer, consumer electronics original equipment manufacturer

(CE,OEM), and distributor. The manual provides information about

installation, principles of operation, interface command implementation,

and maintenance.

Table des matières

Autres manuels Maxtor Stockage

Maxtor

Maxtor SATA II/300 Manuel utilisateur

Maxtor

Maxtor C01W015 - Maxtor OneTouch III Turbo Edition Hard Drive... Manuel utilisateur

Maxtor

Maxtor SCSI Manuel utilisateur

Maxtor

Maxtor OneTouch 4 Plus Manuel utilisateur

Maxtor

Maxtor OneTouch 3 Manuel utilisateur

Maxtor

Maxtor 1394 External Storage Manuel utilisateur

Maxtor

Maxtor 1394 External Storage Manuel utilisateur

Maxtor

Maxtor OneTouch STM303203OTA3E1-RK Manuel utilisateur

Maxtor

Maxtor QUICKVIEW 300 Manuel utilisateur

Maxtor

Maxtor STM31000528AS Manuel utilisateur

Maxtor

Maxtor STM320004SDA20G-RK - Maxtor Shared Storage II NAS... Manuel utilisateur

Maxtor

Maxtor 2R015H1 Manuel utilisateur

Maxtor

Maxtor STM3250620A - Maxtor DiamondMax 250 GB Hard... Manuel utilisateur

Maxtor

Maxtor Maxtor OneTouch 4 Manuel utilisateur

Maxtor

Maxtor Personal Storage 3000XT Manuel utilisateur

Maxtor

Maxtor Personal Storage 3000LE Manuel utilisateur

Maxtor

Maxtor Personal Storage 5000DV Mode d’emploi

Maxtor

Maxtor D540X-4K Manuel utilisateur

Maxtor

Maxtor STM3402111A - Maxtor DiamondMax 40 GB Hard... Manuel utilisateur

Maxtor

Maxtor 20302300 Manuel utilisateur

Maxtor

Maxtor Pocket Drive Manuel utilisateur

Maxtor

Maxtor Maxtor OneTouch USB Manuel d'installation

Maxtor

Maxtor ONETOUCH STM315004OTDB06-RK Manuel utilisateur

Maxtor

Maxtor STM940215A - Maxtor MobileMax 40 GB Hard... Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur