MasterCraft 058-7732-0 Manuel utilisateur

INSTRUCTION MANUAL

AIR-POWERED SHEAR

058-7732-0

OILDAILY

TABLE OF CONTENTS

AIR-POWERED SHEAR 058-7732-0

QUICK START GUIDE

TECHNICAL SPECIFICATIONS 3

SAFETY GUIDELINES 4–9

KEY PARTS DIAGRAM 10

IMPORTANT INFORMATION 11–13

OPERATING INSTRUCTIONS 14–15

MAINTENANCE 16–17

TROUBLESHOOTING 18–19

EXPLODED VIEW 20

PARTS LIST 21

WARRANTY 22–23

SAFETY GUIDELINES

AIR-POWERED SHEAR 058-7732-0

This manual contains information that relates to PROTECTING PERSONAL SAFETY and PREVENTING

EQUIPMENT PROBLEMS. It is very important to read this manual carefully and understand it

thoroughly before using the product. The symbols listed below are used to indicate this information.

Note- The word “Note” is used to inform the

reader of something he/she needs to know about

the tool.

PERSONAL SAFETY

These precautions are intended for the personal safety of the user and others working with the user.

Please take time to read and understand them.

DANGER!

Potential hazard that will result in serious

injury or loss of life.

WARNING!

Potential hazard that could result in

serious injury or loss of life.

CAUTION!

Potential hazard that may result in

moderate injury or damage to equipment.

SAFETY GUIDELINES

AIR-POWERED SHEAR 058-7732-0

SAFETY GUIDELINES

DANGER!

Potential hazard that will result in serious injury or loss of life.

•Keep children away from the work area. Do not allow children to handle

power tools.

•Do not use this tool in the presence of flammable liquids or gases. Sparks

that are created during use may ignite gases.

•Do not point the tool towards yourself or other people, even if the tool has

stopped. Keep hands, feet, and all other parts of the body clear from work

area.

•Always ensure that the workpiece is firmly secured leaving both hands free

to control the tool.

•Always ensure that the tool has stopped before putting it down after use, in

the interest of safety and to prevent possible damage to the tool/user.

•Always wear an appropriate face mask or respiratory equipment while

cutting.

•Do not use oxygen or any other combustible or bottled

gas to power air-powered tools. Failure to observe this

warning can cause explosion and serious personal injury

or death. Use only the compressed air to power air-

powered tools. Use a minimum of 25'(7.6 m) of hose to

connect the tool to the compressor. Failure to comply will

result in serious injury or loss of life.

•Risk of electric shock: Do not expose a compressor to rain. Store it indoors.

Disconnect the compressor from the power source before servicing.

Compressor must be grounded. Do not use grounding adaptors.

Oxygen

Hydrogen

Explosive

Combustible

MC-OM-02

SAFETY GUIDELINES

AIR-POWERED SHEAR 058-7732-0

•Risk of personal injury: Do not direct compressed air from the air hose

toward the user or other personnel.

•Risk of inhallation: Never directly inhale the air produced by the compressor.

•Risk of bursting: Do not adjust the pressure switch or safety valve for any

reason. They have been preset at the factory for this compressor’s maximum

pressure. Tampering with the pressure switch or the safety valve may cause

personal injury or property damage.

•Risk of burns: The pump and the manifold generate high temperatures. In

order to avoid burns or other injuries, do not touch the pump, the manifold,

or the transfer tube while the compressor is running. Allow the parts to cool

down before handling or servicing. Keep children away from the compressor

at all times.

•Risk of bursting: Make sure the regulator is adjusted so

that the compressor outlet pressure is set lower than the

maximum operating pressure of the tool. Before starting

the compressor, pull the ring on the safety valve to make

sure the valve moves freely. Drain water from tank after

each use. Do not weld or repair tank. Relieve all pressure

in the hose before removing or attaching accessories. MC-OM-22

SAFETY GUIDELINES

AIR-POWERED SHEAR 058-7732-0

WARNING!

Potential hazard that could result in serious injury or loss of life.

•Do not allow unskilled or untrained individuals to operate the Air-powered

Shear.

•Always ensure that the accessories such as knives, etc., are specially

designed/rated for use with the tool. Also ensure they are secured and

correctly fastened before connecting the tool to the air supply.

•Use only lightweight coil type air hoses to connect the tool to compressor

coupling. Do not fit quick change couplings onto the machine as can cause

the coupling to fall.

•Locate the compressor in a well-ventilated area for cooling, at a minimum of

12" (31 cm) away from the nearest wall.

•Protect the air hose and the power cord from damage and puncture. Inspect

them for weak or worn spots every week, and replace them if necessary.

•Always wear hearing protection when using the air compressor. Failure to do

so may result in hearing loss.

•Do not carry the compressor while it is running.

•Do not operate the compressor if it is not in a stable position.

•Do not operate the compressor on a rooftop or in an elevated position that

could allow the unit to fall or be tipped over.

•Always replace a damaged gauge before operating the unit again.

SAFETY GUIDELINES

AIR-POWERED SHEAR 058-7732-0

CAUTION!

Potential hazard that may result in moderate injury or damage to

equipment.

•Always ensure that the tool has stopped before connecting the tool to the air

supply.

•Do not wear watches, rings, bracelets, or loose clothing when using any air

tool.

•Maintain proper footing at all times in order to ensure correct balance.

•Do not overload the tool. Allow the tool to operate at its optimum speed for

maximum efficiency.

• Do not use a tool that is leaking air, with missing or damaged parts, or that

requires repairs. Verify that all screws are securely tightened.

• For optimal safety and tool performance, inspect the tool daily in order to

ensure free movement of the trigger, safety mechanisms, and springs.

•Always keep your air tool clean and lubricated. Daily lubrication is essential

to avoid internal corrosion and possible failures.

•Keep the work area clean. A cluttered or dirty workbench may lead to an

accident. Floors should be kept clear.

•Use the tool only in a well-ventilated area.

•Handling and storage of oil: Use with adequate ventilation. Avoid contact of

oil with eyes, skin, and clothing. Avoid breathing spray or mist. Store in a

tightly closed container in a cool, dry, well-ventilated area free from

incompatible substances.

•Do not use the tool near or below freezing temperature, as doing so may

cause tool failure.

•Do not store the tool in freezing temperatures to prevent ice formation on

the operating valves of the tool, as doing so may cause tool failure.

SAFETY GUIDELINES

AIR-POWERED SHEAR 058-7732-0

Note: Recycle unwanted materials rather than disposing of them as waste. Sort the tools, hoses, and

packaging in specific categories and take to the local recycling centre or dispose of them in an

environmentally safe way.

CAUTION!

Potential hazard that may result in moderate injury or damage to

equipment.

•Disconnect the tool from the air supply and turn off the

compressor before changing knives or before performing any

maintenance, or changing accessories, when the tool is not

in use, when it is being handed to another person, and when

it is left unattended. Failure to comply could result in

moderate injury or damage to equipment.

•Use safety goggles and ear protection:

Wear safety glasses with side shields when operating the

tool/compressor and verify that others in the work area are

also wearing safety glass. Safety glasses must conform to

American National Standards Institute (ANSI Z87.1)

requirements and must provide protection from flying

particles from the front and the sides.

Air-powered tools are loud and the sound can cause hearing

damage. Always wear ear protection to help prevent hearing

damage and loss. Failure to comply could result in moderate

injury.

MC-587732-02

OILDAILY

MC-OM-01

KEY PARTS DIAGRAM

AIR-POWERED SHEAR 058-7732-0

No. Description No. Description

1 Knives 3 Handle

2 Trigger 4 Air inlet plug

MC-587732-01

OILDAILY

Table des matières

Autres manuels MasterCraft Outils électriques

MasterCraft

MasterCraft 054-5849-4 Manuel utilisateur

MasterCraft

MasterCraft 055-5530-8 Manuel utilisateur

MasterCraft

MasterCraft 058-8987-8 Manuel utilisateur

MasterCraft

MasterCraft 055-6705-8 Manuel utilisateur

MasterCraft

MasterCraft 058-9852-2 Manuel utilisateur

MasterCraft

MasterCraft 54-6505-6 Manuel utilisateur

MasterCraft

MasterCraft 054-8258-2 Manuel utilisateur

MasterCraft

MasterCraft 054-8263-8 Manuel utilisateur

MasterCraft

MasterCraft 054-1266-4 Manuel utilisateur

MasterCraft

MasterCraft 54-4892-4 Manuel utilisateur

MasterCraft

MasterCraft 054-6962-6 Manuel utilisateur

MasterCraft

MasterCraft 058-9642-2 Manuel utilisateur

MasterCraft

MasterCraft 058-813-2 Manuel utilisateur

MasterCraft

MasterCraft PMF300GU Manuel utilisateur

MasterCraft

MasterCraft 055-5511-4 Manuel utilisateur

MasterCraft

MasterCraft 054-6908-8 Manuel utilisateur

MasterCraft

MasterCraft 054-1266-4 Manuel utilisateur

MasterCraft

MasterCraft SC20IFDB Manuel utilisateur

MasterCraft

MasterCraft 54-4790-6 Manuel utilisateur

MasterCraft

MasterCraft 054-6988-6 Manuel utilisateur

MasterCraft

MasterCraft 054-6902-0 Manuel utilisateur

MasterCraft

MasterCraft 054-8251-6 Manuel utilisateur

MasterCraft

MasterCraft 054-4892-4 Manuel utilisateur

MasterCraft

MasterCraft 54-8110-2 Manuel utilisateur

Manuels Outils électriques populaires d'autres marques

AEG

AEG OMNI-JS Manuel utilisateur

SIP

SIP 01533 Manuel utilisateur

Ribimex

Ribimex PRS499 Manuel utilisateur

3M Fiber Optic Connector Crimp Tool Manuel utilisateur

Ryobi

Ryobi P524 Manuel utilisateur

ROJEK

ROJEK FSN 300A Manuel utilisateur

Kemper

Kemper 1740PRO Manuel utilisateur

WABCO

WABCO OptiTire Manuel utilisateur

EINHELL

EINHELL TE-MS 18/210 Li Manuel utilisateur

Orgapack

Orgapack OR-T 85 Guide rapide

TOUGHCUT

TOUGHCUT Diamond 400 Manuel utilisateur

Yaros

Yaros PB-3603 Manuel utilisateur

Fein

Fein BSS 2.0 E Guide de configuration

Baileigh Industrial

Baileigh Industrial SS-2725 Manuel utilisateur

Milwaukee

Milwaukee 2674-20 Manuel utilisateur

Fein

Fein BLs 1.6 Manuel utilisateur

Princess

Princess Electric Multi Sharpener Manuel utilisateur

FOREDOM

FOREDOM K.1050 Manuel