Marshall Electronics M-Lynx-10 Manuel utilisateur

For more information, contact Marshall Electronics, Industrial Video & Security (800) 800-6608

Marshall

Industrial Video/Security Div.

Marshall Lynx LCD

Universal Monitors

10” User Manual

Lynx LCD Monitor User Manual

Important Safeguards .............................................. 4

Introduction .............................................................. 6

Specifications ........................................................... 7

Front Panel Components and Controls ................... 8

Setting Up the Monitor .............................................. 9

Video Main Menu.................................................... 10

VGA Mode ............................................................. 12

Rear Panel Components and Controls .................. 14

Troubleshooting ...................................................... 14

Resolution Chart ...................................................... 15

CONTENTS

Caution:To reduce the risk of electric

shock, do not remove the back.

There are no user-serviceable

parts inside. Always refer

servicing to qualified personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightening ﬂash symbol inside the triangle is intended

to alert the user to the presence of un-insulated and dangerous

voltage within the product’s enclosure that may be of

sufﬁcient magnitude to constitute a risk of electric shock.

The exclamation point within the triangle is intended to alert the

user to the presence of important operating and maintenance

(servicing) instructions.

Graphic Symbol Explanation

Warning– To Prevent Fire or Shock Hazard, DO NOT

Expose this Monitor to Rain or Moisture

This product must be grounded.

Product specifications are subject to change without notice.

Lynx LCD Monitor User Manual

IMPORTANT SAFEGUARDS

Please comply with warning regarding power requirements. The power

source contains high voltage parts. If the cover is removed, it may cause

ﬁre or electric shock. Do NOT remove the cover.

Caution

1. Read the Instructions: All safety and operating instructions should be read

before the monitor is operated.

2. Follow the Instructions: All operating and user instructions should be followed.

3. Cleaning: Unplug the monitor from the wall outlet before cleaning.

Do not use liquid aerosol cleaners. User only a damp,

soft cloth.

4. Water and Moisture: Do not use the monitor in damp environments. For

example, do not operate the monitor in bathrooms,

sinks, laundry rooms, wet basements or near a

swimming pool. Lynx monitors are not recommended

for outdoor use.

5. Accessories: Always ensure that the monitor is placed on a solid,

steady surface/stand. To avoid any possible danger

and/or damage, do not place the monitor on an

unsteady stand, stool, or other surface that could

result in the monitor falling.

6. Ventilation: Slots and openings in the monitor’s cabinet are

provided for ventilation and ensure reliable operation

of the monitor and to protect it from over-heating.

These openings must never be blocked. The monitor

should never be placed near or over a radiator or

head register. This monitor should not be placed or

built in to a rack or bookshelf unless proper ventilation

is provided and supplier instructions have been

adhered to.

7. Object and Liquid Entry: Never push any kind of object into this monitor

through an opening as it may touch dangerous volt-

age points or short out parts that would result in ﬁre

or electric shock. Never spill liquid of any kind into

the monitor.

8. Repair (Servicing): Do not attempt to repair this monitor yourself by

opening or removing covers. This may expose you to

dangerous voltage or other hazards. Refer to a qualiﬁed

service technician if servicing is necessary. If monitor

is opened by anyone other than a factory authorized

service center, the warranty is voided. If serial number

is removed or tampered with, the warranty is voided.

9. Parts Replacement: When part replacement is required, make sure it is

performed by a qualiﬁed technician and that the parts

are supported by the manufacturer.

10. Safety Check: Upon completion of any service or repair to the

monitor, ask the service technician to perform a

safety check to ensure that the monitor is in

proper operating condition.

11. Keep the Instructions: The safety and operating instructions should be

kept for future reference.

Lynx LCD Monitor User Manual

INTRODUCTION

Thank you for purchasing the Marshall Lynx 10” LCD Monitor. The Lynx Series of Universal

Monitors offers high performance features and excellent picture quality for use in a variety

of industrial/commercial applications.

The information contained in this instruction manual covers the installation and operation

of the monitors, and we encourage you to read it carefully. All the installation materials,

wire/cables must pass quality inspections in accordance with international electrical rules

and laws. When installing your monitor, remember to always adhere to local ordinances

and laws concerning wire and cable installation.

SPECIFICATIONS

Display Unit 10” 4:3 TFT/LCD

Video Input/Output 1 channel SVGA input, 1channel S-video, 1 channel

multiple video BNC input/output.

Audio Input/Output 2-channels RCA input/output

1 channel RCA input

Front Panel Controls Menu, (Brightness, Contrast, Saturation, Hue, etc.),

Color, channel switch, Power Switch

Power Input AC100V ~ 230V 50 ~60Hz

Power Consumption Max: 10W

Dimensions 10.5” x 8.4” x 1.6” / 268mm x 215mm x 43mm

(W x H x D)

Weight 3.3 lbs/1.5kg

Deﬁnition 600 lines

Video System World Wide Multiple System (NTSC/PAL)

VGA 800 x 600

Audio Frequency Max: 0.5W

Maximum Brightness 250cd/m2

Maximum Contrast: 450:1

Response Time 16ms

Visual Angle 150º/140º

Operating Environment: Temperature: 0º C ~ 40º C

Humidity: 10% ~ 85%

Lynx LCD Monitor User Manual

FRONT PANEL COMPONENTS AND CONTROLS

AUTO MENU POWER

Power button (stand-by)

Exit Menu

When menu is off, adjust volume (0 ~100).

When menu is on, use to scroll through menu

When menu is on, use to select or change menu functions

When menu is off, selects video input: Video, S-video

and VGA channels

AUTO MENU POWER

SETTING UP THE MONITOR

Carefully unpack the items from the box. After ﬁnding a suitable and secure

location for the monitor, plug the power cord and AC adaptor into the rear power

input (DC12v) and plug the AC adaptor cord into a power source. Turn the

monitor on via the power button on the front panel (LED will be green).

Lynx LCD Monitor User Manual

VIDEO MAIN MENU

1. Picture

To access the Main Menu features, press Menu on the monitor’s front remote.

From the Picture Screen, you can make adjustments to Brightness, Contrast,

Color, Color Temperature, Backlight, and Sharpness.

Scroll through the options using the

◄►

buttons on the front panel. To select an

item, press the Auto Button on the front panel. From here, use the left and right

arrow keys to ﬁnd the level that suits your taste. To exit, press the Menu button.

Brightness:

Contrast:

Color:

Tint:

Backlight:

Sharpness:

0 ~ 100

0 ~ 10

0 ~ 3

2. Function

To access the Function screen, press the Menu button again. The Function

screen allows you to change the broadcast standard (PAL, NTSC, etc), Lan-

guage, OSD Horizontal Position (OSD H-POS), OSD Vertical Position (OSD-V-

POS), turn the Blue screen on or off, or Reset the monitor back to the original

factory settings.

Scroll through the options using the

◄►

buttons on the front panel. To select an

item, press the Auto Button on the front panel. From here, use the left and right

arrow keys to ﬁnd the level that suits your taste. To exit, press the Menu button.

Color System:

Language:

OSD H-POS:

OSD V-POS:

Blue Screen:

Auto Source:

Reset:

Auto/NTSC358 PAL

Chinese/English

0 ~ 100

ON/OFF



Volume Adjustments

To adjust the volume on the Lynx 10” via the Video screen, press the Menu

button repeatedly until the video screen appears. Use the left and right arrow

keys to adjust the volume.

Lynx LCD Monitor User Manual

VGA MENU MODE

1. Picture

In VGA mode, many of the same features can be accessed. Once connected to

a VGA source, you can access the Picture screen by pressing Menu and Audio

buttons. This will allow you to make adjustments to Brightness, Contrast, Focus,

Horizontal and Vertical Position, etc.

Scroll through the options using the

◄►

button on the front panel. To select an

item, press the Auto Button on the front panel. From here, use the left and right

arrow keys to ﬁnd the level that suits your taste. To exit, press the Menu button.

Brightness:

Contrast:

Focus:

Clock:

H-Position:

V-Position:

0 ~ 100

2. Function

To access the Function screen, press the Menu button again. The Function

screen allows you to change Language, OSD Horizontal Position (OSD H-POS),

OSD Vertical Position (OSD-V-POS), Auto Source and Reset the monitor back to

the original factory settings.

Scroll through the options using the

◄►

buttons on the front panel. To select an

item, press the Auto Button on the front panel. From here, use the left and right

arrow keys to ﬁnd the level that suits your taste. To exit, press the Menu button.

Language:

OSD H-POS:

OSD V-POS:

Auto Source:

Reset:

800 x 600

Chinese/English

0 ~ 100

ON/OFF



V: 60HZ

Lynx LCD Monitor User Manual

1. Video - IN

2. Video - OUT

3. S-Video - IN

4. S-Video - OUT

5. Audio 1 -IN

6. Audio 2 - IN

7. Audio OUT

8. VGA

FRONT PANEL COMPONENTS AND CONTROLS

1 IN 2 IN OUTOUTINOUTIN

VIDEO S VIDEO AUDIO

VGA DC/12V

TROUBLESHOOTING

1. No picture on the screen

Make sure the power cord is securely connected and that the front LED is green.

2. No Power

Make sure the power cord is securely connected to the adapter and that the light

on the adapter is green.

3. VGA screen is not clear

Adjust the resolution to the true resolution of 800 X 600.

4. Color deviation.

Check the signal cable to make sure it is tightened correctly. The pins in the

cable could be loose and causing a bad connection.

RESOLUTION

800X600

60Hz √

70Hz √

72Hz √

75Hz √

85Hz ×

1024X768

60Hz √

70Hz √

72Hz √

75Hz √

85Hz √

1152x864

60Hz √

70Hz √

72Hz √

75Hz √

85Hz √

1280x720

60Hz √

70Hz √

72Hz √

75Hz √

85Hz ×

1280x800

60Hz ×

70Hz ×

72Hz ×

75Hz ×

85Hz ×

1280x960

60Hz √

70Hz √

72Hz √

75Hz √

85Hz √

1280x1024

60Hz √

70Hz √

72Hz √

75Hz √

85Hz √

1600x1024

60Hz ×

70Hz ×

72Hz ×

75Hz ×

85Hz ×

1600x1200

60Hz ×

70Hz ×

72Hz ×

75Hz ×

85Hz ×

Lynx Monitors VGA Resolution Chart

√ = Resolution Supported × = Not Supported

Table des matières

Autres manuels Marshall Electronics Moniteur

Marshall Electronics

Marshall Electronics V-R1042DP-TE4U Manuel utilisateur

Marshall Electronics

Marshall Electronics V-LCD50-HDMI Manuel utilisateur

Marshall Electronics

Marshall Electronics V-R82DP-HD Manuel utilisateur

Marshall Electronics

Marshall Electronics M-LCD7-HDI Manuel utilisateur

Marshall Electronics

Marshall Electronics V-R82DP-2SDI Manuel utilisateur

Marshall Electronics

Marshall Electronics V-LCD17HR Manuel utilisateur

Marshall Electronics

Marshall Electronics V-R82P Manuel utilisateur

Marshall Electronics

Marshall Electronics V-LCD8-PRO Manuel utilisateur

Marshall Electronics

Marshall Electronics V-MD151 Manuel utilisateur

Marshall Electronics

Marshall Electronics V-RD151-4 Manuel utilisateur

Marshall Electronics

Marshall Electronics Rack Mountable Unit V-R53P-SDI Manuel utilisateur

Marshall Electronics

Marshall Electronics V-LCD70XP-HDMI Manuel utilisateur

Marshall Electronics

Marshall Electronics V-R102DP-SD Manuel utilisateur

Marshall Electronics

Marshall Electronics V-R72DP Manuel utilisateur

Marshall Electronics

Marshall Electronics V-R1041DP-DVI Manuel utilisateur

Marshall Electronics

Marshall Electronics V-LCD15SB-AFHD-DT Manuel utilisateur

Marshall Electronics

Marshall Electronics 8.4-inch TFT/LCD Monitor V-R84DP-SD Manuel utilisateur

Marshall Electronics

Marshall Electronics V-LCD8P-02 Manuel utilisateur

Marshall Electronics

Marshall Electronics V-LCD171MD Manuel utilisateur

Marshall Electronics

Marshall Electronics V-R261-DLW Manuel utilisateur

Marshall Electronics

Marshall Electronics M-CT710 Manuel utilisateur

Marshall Electronics

Marshall Electronics M-LCD7-HDMI Manuel utilisateur

Marshall Electronics

Marshall Electronics V-LCD90MD Manuel utilisateur

Marshall Electronics

Marshall Electronics M-CT6 Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation