Marshall Electronics V-LCD8-PRO Manuel utilisateur

V-LCD8-PRO Instruction Sheet

MMaarrsshhaallll

EElleeccttrroonniiccss

Part No. V-LCD8-PRO

Size 7.9” Diagonal

Active Area 6.35”H x 4.65”V

Input Signal NTSC / PAL auto rec.

Format 1400 x 468 Pixels

Pixel Config. Stripe

Dimensions 9.50”W x 6.37”H x 1.50”D

Color Full Color

Back Light Built-in

Controls Color, Brightness,Contrast

and Tint via OSD

Supply Voltage 12VDC, 1.0A

The V-LCD8-PRO is a stand-alone monitor with a large 7.9” active matrix LCD panel built into a rugged plastic enclosure. Its sleek

design makes it ideal for any indoor or outdoor mobile monitoring application. It has a 1/4-20 mount located on the bottom of the unit

for mounting purposes. The unit has 1 composite and 1 S-Video input, both with active loop through capability. This unit is also

equipped with our new bayonet locking 12VDC power supply, ensuring that the power to the unit will not come undone while being

handled. The unit is NTSC/PAL auto recognition and has an on-screen display to access color, tint, contrast and brightness controls.

Advanced features include reverse horizontal and/or vertical scan, to access these functions see the back of this page.

To operate the unit:

1) Each LCD Panel comes with a protective plastic film that must be removed by carefully lifting the film from the corner and

peeling it off. Be certain not to apply any pressure on the LCD panels, they are fragile and can break. Scratched, cracked or

broken LCD screens are not covered by our warranty.

2) Supply the unit with either a composite or S-Video source. Be certain that the selector switch is moved to the correct

position; composite or S-Video

3) Connect the power supply and press the POWER button on the front of the unit. If no signal is detected, the unit will display a

blue screen with the NO SIGNAL message in the middle of the screen.

Input Selector

Switch

Professional

BNC Connectors

New Bayonet

Locking Power

Input

Active Loop

through Outputs

http://www.LCDRacks.com / e-mail: [email protected]

Plastic cabinet with 1/4-20 mount

Bright and vivid color picture

Slim, portable design

Low power consumption

Accepts composite and S-Video

each with loop through

NTSC/PAL auto recognition

Weighs only 0.78kg

Picture Adjustment and Menu Functions

1. BRIGHTNESS - The BRIGHTNESS can be adjusted at any time by using the UP and DOWN keys on the unit without going

through the MENU.

2. COLOR / CONTRAST / TINT adjustments - Press the MENU button on the front of the unit and use the UP and DOWN keys

to select COLOR, CONTRAST or TINT, once selected press the MENU button again to view the control bar:

Then use the UP and DOWN keys to adjust the level.

To exit the menu, either use the EXIT selection on the screen, or let the menu exit on its own after five seconds of non-activity.

3. SYSTEM SETUP - Enter the MENU and select SYSTEM SETUP. And then press MENU on the PCB to enter SYSTEM

SETUP. The screen will appear a menu of system setup as the following.

DIMMER HIGH

Press MENU to enter dimmer setup. Press UP/DOWN to select DIMMER HIGH / DIMMER MID / DIMMER LOW and then

press MENU to select it.

HOR NOR.

Press MENU to enter a setup of horizontal reverse image. Press UP/DOWN to reverse image.

VER NOR.

Press MENU to enter a setup of vertical reverse image. Press UP/DOWN to reverse image.

Warranty

Marshall Electronics warranties to the first consumer, that this V-LCD8-PRO stand-alone monitor will, under normal use, be

free from defects in workmanship and materials, when received in its original container, for a period of one year from the pur-

chase date.

This warranty is extended to the first consumer only and proof of purchase is necessary to honor the warranty. If there is no

proof of purchase provided with a warranty claim, Marshall Electronics reserves the right, not to honor the warranty set forth

above. Therefore, labor and parts may be charged to you.

This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or

modifications in design or construction, voids this warranty.

No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above,

or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.

Due to constant effort to improve products and product features, specifications may change without notice.

CONTRAST

Shown with optional desktop stand and hot shoe adapter with tilt lock

V-LCD-MT

V-LCD4-ST

http://www.LCDRacks.com / e-mail: [email protected]

DIMMER HIGH

HOR NOR.

VER NOR.

EXIT

07/13/2006

Autres manuels Marshall Electronics Moniteur

Marshall Electronics

Marshall Electronics V-R84DP-2SDI Manuel utilisateur

Marshall Electronics

Marshall Electronics LCD Rack Mounted Monitor V-R151P Manuel utilisateur

Marshall Electronics

Marshall Electronics V-LCD70XP-HDMI Manuel utilisateur

Marshall Electronics

Marshall Electronics Orchid OR-702 Manuel utilisateur

Marshall Electronics

Marshall Electronics V-LCD70XHB-HDA Manuel utilisateur

Marshall Electronics

Marshall Electronics Rack Mountable Unit V-R53P-SDI Manuel utilisateur

Marshall Electronics

Marshall Electronics QV261-HDSDI Manuel utilisateur

Marshall Electronics

Marshall Electronics V-LCD70XP-HDA Manuel utilisateur

Marshall Electronics

Marshall Electronics V-R171P-4A Manuel utilisateur

Marshall Electronics

Marshall Electronics V-R102DP-SD Manuel utilisateur

Marshall Electronics

Marshall Electronics V-MD151 Manuel utilisateur

Marshall Electronics

Marshall Electronics V-LCD50-HDI Manuel utilisateur

Marshall Electronics

Marshall Electronics V-R261-IMD-HDSDI Manuel utilisateur

Marshall Electronics

Marshall Electronics V-LCD17HR Manuel utilisateur

Marshall Electronics

Marshall Electronics Orchid OR-2410 Manuel utilisateur

Marshall Electronics

Marshall Electronics V-R241-IMD-3G Manuel utilisateur

Marshall Electronics

Marshall Electronics QV261A-HDSDI Manuel utilisateur

Marshall Electronics

Marshall Electronics M-LYNX-10W Manuel utilisateur

Marshall Electronics

Marshall Electronics V-R65P-HD Manuel utilisateur

Marshall Electronics

Marshall Electronics V-RD151-4 Manuel utilisateur

Marshall Electronics

Marshall Electronics V-RD151-4 Manuel utilisateur

Marshall Electronics

Marshall Electronics V-LCD651STX-HDA Manuel utilisateur

Marshall Electronics

Marshall Electronics V-R70P-HDA Manuel utilisateur

Marshall Electronics

Marshall Electronics V-R72DP-2C Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation