The longest time frame can be set is 23 hours and 59 minutes. For setting time, press
the function button repeatedly until the square symbol above “”flashes, and press
“+”or “-”button until the time supposed shows on the display. After setting, the
proper time (hour, minute) and the square symbol above the “”begins to flash. In
addition, the time countdown begins to work. When it reaches the set time, the square
symbol above the “”flashes, and the alarm will ring, the square symbol will flash,
To stop the ringing press any button.
Notice: press the relevant button, the setting must be carried out in 5 seconds; if
electricity failure suddenly, all the set procedure and the proper clock time (hour,
minute) will disappear.
After electrical power is on again, “12:00”and the square symbol above “”will
show on the display, you need to set it again .
The oven light
Set knob “B”to the symbol to turn it on .It lights the oven and stays on when any
of the electrical heating elements in the oven come on.
Cooling ventilation
In order to cool down the exterior of the appliance, this model is equipped with a cooling
fan, which comes on automatically when the oven is hot.
When the fan is on, a normal flow of air can be heard exiting between the oven door and
the control panel.
Note: When cooking is done, the fan stays on until the oven cools down sufficiently.
How to Keep Your Oven in Shape
Before cleaning your oven, or performing maintenance, disconnect it from the power supply.
To extend the life of your oven, it must be cleaned frequently, keeping in mind that:
·the enameled or stainless steel parts should be washed with lukewarm water without
using any abrasive powders or corrosive substances which could ruin them ;Stainless steel
could get stained .If these stains are difficult to remove, use special products available
on the market. After cleaning, it is advisable to rinse thoroughly and dry.
·the inside of the oven should preferably be cleaned immediately after use ,when it
is still warm ,with hot water and soap ;The soap should be rinsed away and the interior
dried thoroughly. Avoid using abrasive detergents (for example cleaning powders, etc)
and abrasive sponges for dishes or acids (such as lime scale –remover, etc…) as these
could damage the enamel .If the grease spots and dirt are particularly tough to remove,
use a special product for oven cleaning, following the instructions provided on the packet.
Never use a steam cleaner for cleaning inside of oven.
·if you use your oven for an extended period of time ,condensation may form .Dry it
using a soft cloth.
·there is a rubber seal surrounding the oven opening which guarantees its perfect
functioning .Check the condition of this seal on a regular basis .If necessary, clean
it and avoid using abrasive products or objects to do so. Should it become damaged, please
contacts you’re nearest After-sales Service Center .We recommend you avoid using the
oven until it has been repaired.
·never line the oven bottom with aluminum foil ,as the consequent accumulation of heat
could compromise the cooking and even damage the enamel .
·clean the glass door using non-abrasive products or sponges and dry it with a soft
cloth .
How to Remove the Oven doors
For a more thorough clean, you can remove the oven door. Choose the remove and assemble
method. Proceed as follows:
Oven door structures 1 remove and assemble procedure:
·Open the door to the full extent(fig.1);
·Open the lever A completely on the left and right hinges(fig.2);
·Hold the door as shown in fig.3
·Gently close the door(fig.3)until left and right hinge levers Aare hooked to part
Bof the door(fig.4).
·withdraw the hinge hooks from their location following arrow C(fig.4);
