MacDon A30-D Manuel utilisateur

The harvesting specialists.

A30-D and A40-D

Pull-Type Mower Conditioner and

Self-Propelled Auger Header

Supplement to Operator’s Manual

169000_SUPPLEMENT_2 Revision D

Original Instruction

Purpose of Supplement

After your operator’s manual was printed, a decal was added to the A30-D mower conditioner hitch to alert the

Operator that the transport lock pin must be in place before transport.

Replace the following pages of the A30-D and A40-D Operator’s Manual, 169000 Revision F, with the pages provided

in this supplement:

• Safety Sign Location - pages 10–12

• Safety Sign Deﬁnitions - pages 15–19

• Preparing Mower Conditioner for Transport - page 55

1Safety

1.1 Safety Sign Locations: Pull Type

Figure 1.1: Left Side

A - MD #174632 B - MD #184422 C - MD #166452 D - MD #113482

E - MD #194464 F - MD #174436 G - MD #171287 H - MD #171279

J - MD #36651 K - MD #194521

Figure 1.2: Decals on Left Side

169000_SUPPLEMENT_2 1Revision D

SAFETY

Figure 1.3: Right Side

A - MD #171279 B - MD #184372 C - MD #171287

D - MD #184422 E - MD #174632 F - MD #166452

Figure 1.4: Decals on Right Side

169000_SUPPLEMENT_2 2Revision D

SAFETY

Figure 1.5: Hitch

A - MD #194464 B - MD #113482 C - MD #174436

D - MD #171281 E - MD #171281 F - MD #171286

G - MD #171298

Figure 1.6: Decals on Hitch

169000_SUPPLEMENT_2 3Revision D

SAFETY

1.2 Understanding Safety Signs

MD #36651

Rotating driveline

DANGER

• Rotating driveline contact can cause death—

keep away!

Do not operate without:

• Stopping the engine and removing the key before

opening shield.

• All driveline guards, tractor, and equipment shields

in place.

Figure 1.7: MD #36651

MD #113482

General hazard pertaining to machine operation

and servicing

CAUTION

To avoid injury or death from improper or unsafe

machine operation:

• Read the operator’s manual and follow all safety

instructions. If you do not have a manual, obtain one

from your Dealer.

• Do not allow untrained persons to operate the machine.

• Review safety instructions with all Operators every year.

• Ensure that all safety signs are installed and legible.

• Make certain everyone is clear of machine before

starting engine and during operation.

• Keep riders off the machine.

• Keep all shields in place, and stay clear of moving parts.

• Disengage header drive, put transmission in Neutral,

and wait for all movement to stop before leaving

operator’s position.

• Shut down the engine and remove the key from ignition

before servicing, adjusting, lubricating, cleaning, or

unplugging machine.

• Engage safety props to prevent lowering of header or

reel before servicing in the raised position (refer to the

header operator’s manual).

• Use slow moving vehicle emblem and ﬂashing warning

lights when operating on roadways unless prohibited

by law.

Figure 1.8: MD #113482

169000_SUPPLEMENT_2 4Revision D

SAFETY

MD #166452

Pinch point hazard

WARNING

• To avoid injury, stop the engine and remove the key

before opening engine hood.

Figure 1.9: MD #166452

MD #171279

Crushing hazard

DANGER

• Read the operator’s manual and follow all safety

instructions. If you do not have a manual, obtain one

from your Dealer.

• Rest header on ground or engage hydraulic lockout

valves before going under unit.

Figure 1.10: MD #171279

MD #171281

Hot ﬂuid under pressure

CAUTION

•Coolan

t is under pressure and may be hot. Never

remove radiator cap when engine is hot.

Figure 1.11: MD #171281

169000_SUPPLEMENT_2 5Revision D

SAFETY

MD #171286

Lock pull-type hydraulic for transport

WARNING

• Charge cylinder with oil before towing.

• Rotate valve handle to lock in transport position.

• Maximum towing speed 20 mph (32 km/h).

• Failure to comply could result in death or serious injury.

Figure 1.12: MD #171286

MD #171287

Install lock panel

WARNING

• Rotate valve handle to lock before going under unit.

• Failure to comply could result in death or serious injury.

Figure 1.13: MD #171287

MD #171288

Entanglement hazard

CAUTION

•Toavoi

d injury from entanglement with rotating auger,

stand clear of header while machine is running.

Figure 1.14: MD #171288

169000_SUPPLEMENT_2 6Revision D

SAFETY

MD #171298

PT transport lock pin

WARNING

• Transport lock pin must be in place before transport.

• Failure to comply could result in death or serious injury.

Figure 1.15: MD #171298

MD #174436

High pressure oil hazard

WARNING

• Do not go near leaks

• High pressure oil easily punctures skin causing serious

injury, gangrene, or death.

• If injured, seek emergency medical help. Immediate

surgery is required to remove oil.

• Do not use ﬁnger or skin to check for leaks.

• Lower load or relieve hydraulic pressure before

loosening ﬁttings. Figure 1.16: MD #174436

MD #174632

Reel entanglement hazard

CAUTION

•Toavoi

d injury from entanglement with rotating reel,

stand clear of header while machine is running.

Figure 1.17: MD #174632

169000_SUPPLEMENT_2 7Revision D

SAFETY

MD #184372

General hazard pertaining to machine operation

and servicing

CAUTION

To avoid injury or death from improper or unsafe

machine operation:

• Read the operator’s manual and follow all safety

instructions. If you do not have a manual, obtain one

from your Dealer.

• Do not allow untrained persons to operate the machine.

• Review safety instructions with all Operators annually.

• Ensure that all safety signs are installed and legible.

• Make certain everyone is clear of machine before

starting engine and during operation.

• Keep riders off the machine.

• Keep all shields in place and stay clear of moving parts.

• Disengage header drive, put transmission in Neutral,

and wait for all movement to stop before leaving

operator’s position.

• Shut off the engine and remove the key from ignition

before servicing, adjusting, lubricating, cleaning, or

unplugging machine.

• Engage safety props to prevent lowering of raised unit

before servicing in the raised position.

• Use slow moving vehicle emblem and ﬂashing warning

lights when operating on roadways unless prohibited

by law.

Figure 1.18: MD #184372

MD #184422

Keep shields in place hazard

WARNING

• Do not place foot.

• To avoid injury, stop the engine and remove the key

before opening power drive system shield.

•Keepallshi

elds in place.

Figure 1.19: MD #184422

169000_SUPPLEMENT_2 8Revision D

Autres manuels pour A30-D

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels MacDon Matériel agricole

MacDon

MacDon A40-D Manuel utilisateur

MacDon

MacDon R113 Manuel utilisateur

MacDon

MacDon R216 Manuel utilisateur

MacDon

MacDon FD75 Manuel utilisateur

MacDon

MacDon D65 Manuel utilisateur

MacDon

MacDon R85 Manuel utilisateur

MacDon

MacDon D50 Manuel utilisateur

MacDon

MacDon NEW HOLLAND D2 Series Manuel utilisateur

MacDon

MacDon A40-D Manuel utilisateur

MacDon

MacDon A30-S Manuel utilisateur

MacDon

MacDon M105 Manuel utilisateur

MacDon

MacDon FlexDraper FD2 Series Manuel utilisateur

MacDon

MacDon D1XL Series Manuel utilisateur

MacDon

MacDon D50 Manuel utilisateur

MacDon

MacDon M1170 Manuel utilisateur

MacDon

MacDon M155 Manuel utilisateur

MacDon

MacDon R1 Series Manuel utilisateur

MacDon

MacDon M105 Manuel utilisateur

MacDon

MacDon R113 Manuel utilisateur

MacDon

MacDon R216 Manuel utilisateur

MacDon

MacDon A30-S Manuel utilisateur

MacDon

MacDon C Series Manuel utilisateur

MacDon

MacDon A30-S Manuel utilisateur

MacDon

MacDon FlexDraper FD2 Series Manuel utilisateur

Manuels Matériel agricole populaires d'autres marques

GSi

GSi PNEG-2314 Manuel utilisateur

Checchi & Magli

Checchi & Magli TEXDRIVE Manuel utilisateur

Amazone

Amazone Cenius 4003-2TX Manuel utilisateur

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manuel utilisateur

Cima

Cima BLITZ Instructions d'utilisation et d'entretien

Amazone

Amazone CombiDisc 3000 Instructions d'installation

HE-VA

HE-VA Disc-Roller XL Contour Manuel utilisateur

AGT

AGT AGT-SSFM Manuel utilisateur

Milestone

Milestone 72-84 Manuel utilisateur

KUHN

KUHN Hector 3000 Manuel utilisateur

Krone

Krone X-Disc 6200 Manuel utilisateur

Eliet

Eliet DZC450 Manuel utilisateur

Taarup

Taarup BIO+ B4000 Manuel utilisateur

Garland

Garland SHAKER 310 DPG Manuel utilisateur

stable comfort

stable comfort StableWall System Manuel utilisateur

Raven

Raven AccuBoom Manuel utilisateur

International

International 710 Manuel utilisateur

Ashland

Ashland HDW-3217-14 Manuel utilisateur