M-Audio Delta 1010 Manuel utilisateur

10 in 10 out PCI Digital Recording System with S/PDIF

User Guide

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

What’s in the Box? . . . . . . . . . . . . . . . . . . . . . . . . . . 3

About the Delta 1010 Digital Recording System . . . . . . . . . . . 4

Product Features & Speciﬁcations . . . . . . . . . . . . . . . . . . 5

Minimum System Requirements . . . . . . . . . . . . . . . . . . . 6

Hardware Controls and Indicators . . . . . . . . . . . . . . . . . . 6

Rack Unit Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Rack Unit Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

PCI Host Adapter Card . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Delta System Overview . . . . . . . . . . . . . . . . . . . . . . . . 10

Analog Inputs/Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . 10

The Digital Monitor Mixer . . . . . . . . . . . . . . . . . . . . . . . . . 10

The Patchbay / Router . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Synchronization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using Delta 1010 with your Audio Software . . . . . . . . . . . . . 12

Audio Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Audio Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Control Panel Software . . . . . . . . . . . . . . . . . . . . . . . 14

Delta Control Panel for Windows XP . . . . . . . . . . . . . . . . . . . . . 14

Monitor Mixer Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Patchbay/Router Tab . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Hardware Settings Tab . . . . . . . . . . . . . . . . . . . . . . . . . 18

S/PDIF Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Bass Management Tab . . . . . . . . . . . . . . . . . . . . . . . . . 25

About Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Additional Control Panel Features . . . . . . . . . . . . . . . . . . . . . . 26

Control Panel Software for Mac OS X . . . . . . . . . . . . . . . . 27

Monitor Mixer Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Patch Bay Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Hardware Settings Tab . . . . . . . . . . . . . . . . . . . . . . . . . . 31

S/PDIF Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

About Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Additional Control Panel Features . . . . . . . . . . . . . . . . . . . . . . 36

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Technical Speciﬁcations . . . . . . . . . . . . . . . . . . . . . . . 41

Technical Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Appendix A: Clocking . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Warranty Terms and Registration . . . . . . . . . . . . . . . . . . 44

3Delta 1010 User Guide

Introduction

Congratulations on your purchase of the Delta 1010 audio interface. Delta 1010

is the top product in M-Audio’s line of award winning “Delta” digital recording

systems and has helped set the standard for the solid hardware design and robust

driver technology found in other members of the Delta family.

Even if you are experienced with digital recording, please take a moment to read

through this manual. It will give you valuable information about the Delta 1010 interface

and will help you get the most out of your new purchase. You may also want to refer

to your audio software’s documentation to better understand how Delta 1010 can be

integrated with the application. Your experience and enjoyment with the interface will

be greatly enhanced by a good working knowledge of your equipment.

What’s in the Box?

Your Delta 1010 package contains:

< Delta 1010 rack-mount interface

< PCI Host Adapter card

< Host connector cable

< 9V AC 3A in-line power supply unit

< Printed Quick Start Guide

< Delta Series CD-ROM containing drivers, Control Panel software, and

documentation

Delta 1010 User Guide4

About the Delta 1010

Digital Recording System

Delta 1010 is a professional audio interface with a total of 10 inputs and 10

outputs. The interface features eight 1/4” balanced/unbalanced analog inputs

and outputs as well as a pair of coaxial (RCA) S/PDIF I/O. Delta 1010 can create

pristine 24-bit recordings at sampling rates of up to 96 kHz.

Connect line-level audio sources (i.e., keyboards, mixers, preampliﬁers, etc.) to the 1/4”

input jacks on the rear of the interface. Set the operating line level for each input using

the +4/-10 switch located next to each jack. Connect your DAT recorder, MiniDisc

player, or other digital device to Delta 1010’s S/PDIF ports on the PCI Host card.

Control all routing and hardware settings using the Control Panel software.

The sturdy 1U rack-mount chassis houses all of the A/D and D/A converters, keeping

them away from the electrically noisy environment inside your computer and assuring

the best audio performance. The rack unit features Word Clock I/O connectors, which

allow you to synchronize Delta 1010 with all of your other Word Clock capable devices.

Also, the interface features MIDI input and output ports, allowing you to connect MIDI-

capable devices (synthesizers, drum machines, etc.) to your computer or to synchronize

external devices with your interface using a sync protocol such as MIDI Time Code

(MTC).

Finally, the Delta 1010 PCI Host Adapter card features a ﬂexible digital mixer. This

mixer handles routing within the interface and gives you control over volume, pan, solo,

and mute just like on a hardware mixer used for monitoring.

5Delta 1010 User Guide

Product Features & Speciﬁcations

< 10-input, 10-output recording interface

< Supports up to 24-bit, 96kHz operation

< PCI host card with DSP for digital mixing

< Sturdy rack-mounted I/O interface

< Eight balanced/unbalanced analog inputs and outputs on 1/4” connectors with

+4dB or -10dB operation (operating levels are individually selectable for each

channel)

< MIDI, Word Clock, and S/PDIF inputs and outputs

< Balanced or unbalanced operation

< High dynamic range: D/A 114dB, A/D 109dB (A-weighted)

< Low distortion (measured THD @ 0dBFS): A/D 0.001%, D/A 0.0015%.

< All data paths support up to 24bit/96kHz performance.

< Control Panel software for mixing, routing, and monitoring capabilities

< Sample-accurate hardware sync allows linking of up to four Delta 1010 interfaces

in one computer

< Windows XP drivers for ASIO/ASIO2, WDM, DirectX, MME, and GSIF/GSIF2

protocols.

< Mac OS X drivers for Core Audio and Core MIDI

Delta 1010 User Guide6

Minimum System Requirements*

Windows* Mac*

< Windows XP** Service Pack 2

< Pentium III 933MHz

< 256 MB RAM

< G3† processor using Mac OS X 10.3.9

with 256 MB RAM

< G4† processor using Mac OS X 10.3.9

/ 10.4.8 or higher with 512 MB RAM

*M-Audio suggests that you also check the minimum system requirements for your

software, as they may be greater than Delta 1010’s requirements.

**Home and Professional Edition only. Windows Media Center Edition is not currently

supported

†G3/G4 accelerator cards not supported.

Hardware Controls and Indicators

Rack Unit Front Panel:





1 Power Indicator LED (Power): This LED illuminates when the interface is

powered on and has established communication with your host computer.

2 MIDI Input LED: This LED illuminates when MIDI data is received at the MIDI

Input Jack 4.

3 MIDI Output LED: This LED illuminates when MIDI data is sent from the MIDI

Output jack 5.

7Delta 1010 User Guide

4 MIDI Input Jack (MIDI In): This standard 5-pin MIDI connector accepts signals

from any MIDI compatible device such as a keyboard or control surface.

5 MIDI Output Jack (MIDI Out): This standard 5-pin MIDI connector transmits

signals to any MIDI compatible device such as a synthesizer, sound module, or

drum machine.

Rack Unit Back Panel:













6 Word Clock In (WORDCLOCK In): Delta 1010 is capable of synchronizing

its sample rate clock with that of an incoming word clock signal using this BNC

input.

7 Word Clock Out (WORDCLOCK Out): This BNC output transmits a Word

Clock signal that is in sync with the present sample rate clock of Delta 1010.

The Word Clock input and outputs (6, 7) are designed

to work with 75-ohm coaxial BNC cables. Be sure to

use 75-ohm BNC cables to ensure good performance.

8 Host Cable Connector (HOST CABLE): Use the supplied 25-pin host cable

to connect this jack to the Delta 1010 PCI Host Adapter card.

IMPORTANT: Do not connect the PCI Host Adapter card and rack-mount

portion of the interface when your computer is powered on. Doing so

may damage the rack-mount interface and/or the PCI card. Only connect

(or disconnect) the PCI card and rack-mount unit when your computer is

powered off.

9 Analog Inputs 1-8 (INS): These eight 1/4” jacks accept line-level signals from

any balanced (TRS) or unbalanced (TS) device. The sensitivity of each input can

be conﬁgured using the +4/-10 switch (11) to the left of each input.

10 Analog Outputs 1-8 (OUTS): These eight 1/4” jacks output balanced, line-

level signals for monitoring, mixing, or processing with external devices. The

sensitivity of these outputs can be conﬁgured using the +4/-10 switch (11) to the

left of each output. Note that these balanced outputs are fully compatible with

unbalanced devices as well.

Delta 1010 User Guide8

11 Signal-Level +4/-10 Switch: This button sets the operating signal level for

each analog input and output channel. When this switch is in the out position, its

associated channel will operate at the professional +4dBu standard; when the

switch is pressed, the channel will operate at -10dBV.

About the +4/10 button: The +4dBu standard is

used by most mixers, preampliﬁers, and other professional

audio devices with balanced outputs. Devices with

unbalanced outputs commonly use the -10dBV standard.

If you’re not sure about the operating level of a device

you’ve connected to your Delta 1010, refer to the device’s

user manual.

12 Power Jack (9V AC): Connect the supplied 9V AC power supply to this jack.

IMPORTANT: Do NOT connect a DC power supply to this jack. Doing

so may damage the interface. Delta 1010 requires a 9V AC supply, with at

least 3 ampere capability.

PCI Host Adapter Card:







13 Coaxial S/PDIF Input: This RCA connector allows Delta 1010 to receive a

stereo S/PDIF signal from any device with a coaxial (RCA) S/PDIF digital output

such as a DAT machine, MiniDisc player, or external A/D converter.

NOTE: The S/PDIF Input is only available when Delta 1010’s Master Clock

source is set to “S/PDIF” or “Word Clock.”

14 Coaxial S/PDIF Output: This RCA connector lets you send a stereo S/PDIF

signal to any device that can receive a coaxial (RCA) S/PDIF signal such as a

DAT recorder, MiniDisc recorder, or external D/A converter.

15 Host Cable connector: Use the supplied Host Cable to connect this jack to the

Host Cable Connector (8) on the rack-mount portion of the Delta 1010 interface.

9Delta 1010 User Guide

IMPORTANT: Do not connect the PCI Host Adapter card to the rack-mount

chassis when your computer is powered on. Doing so may damage the

interface. Only connect (or disconnect) the PCI card and rack-mount unit when

your computer is powered off.

IMPORTANT: The Host Cable connector features a 25-pin jack that looks

like the parallel (printer) port connection found on some computers. If your

computer has a parallel port, be careful not to confuse these two connectors

and do not attempt to connect the PCI Host Adapter card to anything other than

the rack-mount portion of the Delta 1010 interface. Doing so may damage the

interface.

The PCI Host Adapter card and rack-mount portion of the

interface are connected using a standard 25-pin “D-Sub” cable.

This is the same type of “bidirectional printer cable” used to

connect printers to the parallel port (printer port) of a computer.

This type of cable is commonly available through computer and

professional audio stores and M-Audio has successfully tested

Delta 1010 with cables up to 25 feet in length. If the supplied

Host Cable is not long enough for optimal for computer/

interface placement, consider replacing the included cable with

a longer one.

Delta 1010 User Guide10

Delta System Overview

Analog Inputs/Outputs

Delta 1010’s analog inputs and outputs allow you to record a variety of audio sources

and to playback your recordings to many destinations. On the rear of the interface, you

will ﬁnd eight 1/4” inputs and eight 1⁄4” outputs with independent +4/-10 signal level

buttons (11) next to each jack. Be sure to set these switches properly to ensure the

best possible sound quality.

All of the analog inputs and outputs on the rear of the Delta 1010 are balanced 1/4”

jacks. These jacks allow connection to either balanced (TRS) or unbalanced (TS) line-

level devices.

NOTE: Since Delta 1010 does not have microphone pre-ampliﬁers built into the

inputs, it is not possible to use a microphone that is connected directly to the

interface. To record a microphone, you must ﬁrst pass the microphone signal

through a microphone preampliﬁer (such as the M-Audio TAMPA) and connect

the preampliﬁed line-level or S/PDIF output to the input of the Delta 1010.

The Digital Monitor Mixer

Delta 1010 features a hardware digital audio mixer built into its PCI Host Adapter card.

This mixer accepts digital audio from all hardware inputs and all software audio outputs,

mixes them with 36-bit internal precision, and then provides the mixed signal to analog

outputs 1-2 and/or the S/PDIF outputs for monitoring purposes. While the mixer is

primarily intended to be used for creating monitor mixes, it may also be used for stereo

mixing since its output can be recorded back into your audio application. The digital

audio mixer is conﬁgured and controlled by the included Control Panel software.

Autres manuels pour Delta 1010

Table des matières

Autres manuels M-Audio Équipement d'enregistrement

M-Audio

M-Audio ProjectMix I/O Manuel utilisateur

M-Audio

M-Audio Axiom 25 Manuel utilisateur

M-Audio

M-Audio M-TRACK plus Manuel utilisateur

M-Audio

M-Audio MicroTrack 24/96 Manuel de la liste des pièces

M-Audio

M-Audio Keystation Mini 32 Manuel utilisateur

M-Audio

M-Audio Ozone Manuel utilisateur

M-Audio

M-Audio CODE 25 Manuel utilisateur

M-Audio

M-Audio MidAir 25 Manuel utilisateur

M-Audio

M-Audio Code 49 Manuel utilisateur

M-Audio

M-Audio Recording Equipment Manuel utilisateur

M-Audio

M-Audio Midiman Sonica Manuel utilisateur

M-Audio

M-Audio KEYSTATION 49 MK3 Manuel utilisateur

M-Audio

M-Audio Evolution UC-33e Manuel utilisateur

M-Audio

M-Audio Podcast Factory Manuel utilisateur

M-Audio

M-Audio Trigger Finger Pro Manuel utilisateur

M-Audio

M-Audio ProFire Lightbridge Manuel utilisateur

M-Audio

M-Audio X-Session Manuel utilisateur

M-Audio

M-Audio TDIF-Interface mit 24Bit/96kHz Analog and Digital i/O Delta... Guide de démarrage rapide

M-Audio

M-Audio M-Track Hub Manuel utilisateur

M-Audio

M-Audio GuitarBox PRO Manuel utilisateur

M-Audio

M-Audio Fast Track Pro Manuel utilisateur

M-Audio

M-Audio USB OMNISTUDIO Manuel utilisateur

M-Audio

M-Audio KeyRig49e Manuel utilisateur

M-Audio

M-Audio Fast Track Ultra Manuel utilisateur

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien